Nasha

Resolved - removed the libvert image now all is well. When I stopped and started VM it logged a strange error that it was already running

Docker - I was unaware, where'd you see the flooding (log?) - makes sense why it took unusually lint to generate the logs My target name hasn't changed, but I know the manager was overhauled so I will try this. Not a good choice, or not entirely confirming to Linux generally accepted foldername schema? If I look back 20yrs ago I would expect problems, just like editing scripts in notepad was a no-no. I'll remove the punctuation and we'll see . Via.form NOTHING happens as in click create and nothing happens. Everything you've said tells me that limetexh have a bug and if foldermames isnt the issue then there's nothing else wrong wo back to where I started :(

Hi unraiders, Happy Birthday everyone, I brought along something very special for you all! I held off for over 6 months raising this issue here in the hope that something might change or that a solution from the Reddit community would bear fruit. The last time I was able to and tried to was prior to v7, and it hasn't worked on 7.1, 7.1.2, or 7.1.4. The Reddit community hasn't provided much in terms of what I had hoped for and explicitly asked for. In the end, the realization came that I needed the kind of person Reddit wasn't going to give me. The general rhetoric became that "this noob doesn't have a clue." But I've been with unRAID for 15 years, and I'm not afraid to get my hands dirty. The biggest issue for me, and for initially seeking community support, is that there is no error message. Simply, when I attempt to create a VM with any combination of settings and then click "Create," nothing happens. I've ruled out it being a client-side issue by trying three different browsers across three different platforms. I'm at a brick wall and over 6 months behind on needing to spin up a VM (now with a waiting list). So, in desperation, short of logging a ticket and hoping for help, I poked around enough to generate errors I configured a VM, switched to XML mode, copied the contents, and then created a custom VM with the text I just copied. The "Create" button worked here and threw an error, "domain type not specified," or something similar. Sure enough, <domain TYPE=""> was in the XML, so I entered qemu thinking my problems were over and tried again. The error message this time is "No PCI busses available." Now I at least have something I can bring forth, but it feels like there might be a deeper issue here because the default interface should be throwing an error. If it did, my project wouldn't have been stagnant for so long. So what is this error message actually telling me, and what do I need to do to resolve it? Or do we need to back up and understand why the domain TYPE was never defined and/or get word to the company devs that there might be a bug in the interface? Or D: None of the above, but please, can anybody give me tasks to get this issue resolved? I'm attaching the diagnostics and default VM XML just to cover all the bases. Thank you so much to anyone who comes to my aid yoda-diagnostics-20250803-1416.zip defaultVM.xml

Did you perform the changes in the linked post?

Crap my apologies. I originally replied to the wrong person and in the copy paste frenzy the link didn't make it. https://forums.unraid.net/topic/46802-faq-for-unraid-v6/page/2/#comment-819173

I see you're running AMD CPU... Known issues there. See this post for resolution. CA Fix Common Problems plugin would pickup whether or not it was the cause as well. However the link it provides for the solution is somewhat deprecated/doesn't specifically include the known issue with AMD. I requested a change a while back, not sure if it's been implemented.

Oops wrong message I replied to

@JorgeB tagging you in because you've been across them all whether you remember or not is a different story! I believe the root cause has neber been foound and that each issue that's come along, has been the equivalent to banging the side of a CRT to fix it's color glitch. Which works.... Until oneday it doesn't! Entirely new platform server - HBA removed entirely, onboard SATA ports are in use, and still those two disks are "offline". Boot diags attached if you care to take a final look, Anyway, i've ordered replacements to stop the headaches all round- More importantly non-Seagate replacements. I bought SAS drives, but not i think about it, isn't there some caveat to using SAS drives with unraid? yoda-diagnostics-20250517-0158.zip

i coldnt effect change... so i replaced the HBA and it's PCI riser HW and i thought it booted ok but no.... The parity drives have switched position.... Last time you might recall an unsolveable dual error,,,,, That was card and cables to get it to play nice. I officially have the worst MB AND CPU never again AMD. I have 4 sata ports x16 PCI3 - which takes me x1 GPU... a x1 v3 slot (HBA via mining riser) snd x16mech 8sig v2 slot which errora the HBA if i even try put it in there.... I have a 1 < 5 SATA multiplier which should put me operationally error freee but heavily compromiaed. I need 3mths....Sell off some HW, find the right board. I had case/ AIO's/fans and i had just updated my laptop as part of the refresh thinking i still had time the universe had other plans. I also have an asus workstation board with HBA... I think i'll jump on ebay now and spend $50 on a CPU and ECC DDR3 and just get away from the things that have been causing headaches since i came into vontact. Shortest path to a stable system, comes during the longest weekend of the year! THAT is my . Thanks for ypur help Jorge, but itsprobably say witj confidence it's HW Gremlins fo sho

So id inadvertently selected use as exit node. Was difficult to find amoung all the advanced options i had no idea about. Thanks for your help

Thanks mate x2. Since the first and 2nd diags was a power down and partial disassemble to get a bit of plastic i dropped in my bottom intake fan. So all of that has been reseated but still impacting the same 2 drives. I dont have the luxury of another PCI slot, unless this bent pin 5600g i have is just bent pins and not cooked. Maybe ill finally implement the Ryzen reboots changes finally too. Ill see whether i can make magic, and report back if i fail

I'll admit i'm still in the processs of cobnfiguyring TDS for the first time, dpot's all new to me, but TDS errors out after tds.enable: true w/ Label Manager loads blank pages for each container after clicking Edit. I imagine this is not expected behaviour? I thought it might be a conflict with the FolderView plugin, but removing that didn't help. I'm at stalemate where i'd normally give up on a niche plugim failure, but it's cuttemtly tje only resolution i have at my disposal that will potentially pass WAF and turn a bunch of things shes never logged into, into a custom defined dashboard accessible from anywhere and next time i hear "Cam u download" i interject with how about you try.She doesnt use any of the apps with bot enablement and i'm hoping i can push all that's needed to her device without managing anythnig additional but thats outside the scope of this project. I'd be happy if i could proceed following the documentation to setup. At a complete loss for what to do next, so if anyone is feeling helpful please task me with some actions to diag/resolve!

I dont know why but i never seem to be able to get a grasp on troubleshooting my drive failures. These popped up roughly coinciding with 7.0.1 reboot... I dont have anything of value to add and i cant garnish more information than the drives appear to be working but disabled and timeout upon enable? Attaching Diags from first discovered & a few reboots later if its any value for the boot init. Side note, Thanks Jorge p.s. Do you accept donations? It's come to my attention I don't support independent devs nearly as much as i should. I won't make you rich, but you deserve a portion of what I'm able to give. Not sure if it's timing, luck or fact, but you always seem to be the responder when i throw up diags. But I'd hope there's more than one active interpreter in the forums. yoda-diagnostics-20250413-1335.zip yoda-diagnostics-20250414-0148.zip

Yes via the toggle. >To what URL/Port does Serve point? Pretty sure i tried as default bridge networking AND Custom, but i did have to change the port mapping from 8080, to 8666 in the WebUI config parameter section - though this shouldn't be a breaking change Tailnet is created inside the NAT so it shouldn't matter, Dont waste too much brain time on it - this is the first time ive tried the feature inside a container and something tells me there's additional config required to allow a docker IP to route to a public address (even though Tailnet is reserved range)

The eth{0:9} naming convention is deprecated AFAIK just FYI... This is precisely why USB NIC's are advised against for firewalls and disks for active arrays.... USB is intended to be hot pluggable without interruption of peripheral function. You could potentially trace the windows power setting to stop USB from disconnecting as frequently - this is the veil that Windows would provide user protection from but linux knows it's in everyone's interests to be upfront from the start, It potentially is set in the BOS, but i've never attempted to change a default this... default nor this specific one. But all those times you've heard old timers tell people not to do it, is not without reason. The best solution is to stop trying to move mountains and traverse the ravenes and gullies instead. That is, if you need to provide a network interface between a device and your server, throw in the USB NIC. If you intend to pernanently utilise the interface and are reliant upon it's availability (something USB cannot give) then install another adapter. Yes, you can do things to increase compliance and tame unruly behaviour, but it will fail in the end and numerous times between now and then. TCP/IP doesn't do so well when you insert USB into it's stack as layer 2 mega-latency, The time it takes to initialise a USB NIC from offline state likely exceeds the TCP failure timeout and then packet fragmentation, itll come online send the packets that nobody asked for and it's just a mess. This is what you're dealing with right now.... The mess that comes with using a USB NIC. Sorry but you wont have me offer up bandaids to make it work for you, and likely why you'll not resolve this issue or receive much input other than "don't use USB NIC's" because that's ultimately what it boils down to. It's not laziness on the part of the respondent that brings that response, I've ponswews on whether USB 3.21 or USB4 spec would potentially alleviate the flaws, but I've not performed a white paper deep dive because that's more work than resolving anu/all USB NIC issues by cutting the connecter off all your adapters (I was trained by an old skool kinda guy, cut every cord he ever binned).

I'm confident that the user specifically provided an in-situe suggestion you failed to consider. I hardly expect the existence of a GUID is the sole reason USB boot has not been updated. It's my understanding that there's at least been internal dev discussions recently. There was a Limetech poll for a preferred solution within the last 12mths.... There's been no need, I believe the proliferation of counterfeits might be the catalyst for change. Regarding the gripes with USB power usage, what's the point exactly? Because the theory is lacking, therefore point is invalid. Given the level of OT you chose to drag this topic in order to meet your coniption, it now becomes necessary to correct your fallacies so the readers-and-believers don't leave misinformed and begin preaching lies.

Yep, found that today, sorry for the hassle. Will your headstone read "No Regrets"? or "It started out of necessity...Then I encoded my consciousness into 180 slices and hid them in public containers"? It's surely become more than a hobby, and demanding your time regularly supporting mostly user issues i assume...? I also dont imagine donations cover the workload of maintaining let alone pub;ishing anew? I've never donated to a private dev, i realise now how bad that behaviour actually is... I owe a few people *hunts your donation box*. Seeing how i'm about to be a paying customer.... May i ask a loosly specific question? If i deploy this docker with Tailscale, what behaviour would i expect - It;s accessible from tailnet assumably, but the IP/hostname that gets assigned doesn't load the WebUI as i woulve expected... Do i have something wrong in my setup or in my brain?

Hey @Squid regarding the Fix Common Problems plugin, do you think you could/should update the rectify post you're sent to for MCE Errors on Ryzen platforms, to this one by Jorge? It would have saved me months of frustration and tens of unsafe reboots which happen more often than not during parity operations, thankfully not during a rebuild thus far

30 containers and you dont have another listening on 8080 already? - Just my 2c I'm here to ask @ich777 whether it would be much hassle to imnplement client clipboard integration to Tor-Browser? Manually typing onion addresses is painful! Unless i'm missing something....? Thanks!

Congrats mate. @SpaceInvaderOne you of all have certainly earned it. At least this latest Limetech re-jig has done something right. I just hope it's not a case of having sold your sole along with your IP past and future, over to the devil in the fineprint. I will be honest I've never watched any of your content, well I may have once for a few minutes, but that was enough to know it wasn't for me, though to be fair most A/V content isn't in general when it comes to learning. However, it's been a vertebra in the backbone of the name/software gaining a larger audience so for that I do also commend you. I will have made use of something you've written without a doubt But regardless of what I or anyone else says, you and that awesome nickname (I'm sure it is one of the secrets to your success; it's relatable, humorous, something you want to say over and over because it's just a cool thing to say in a post modern Sci fi.... I have no idea but it will always be tied to the unRAID legacy, and few people live to have a tangible impact of their achievements in life after they're gone, than you already have attained. A the best going forward Ed!

I find it rather curious that it coincided with my alteration of the bios (changed bifurcation from 8+4+4 to Auto), and the fact that that post references changing bios settings.... I might try and revert those settings first, see if that changes anything. I'll report back here what if anything, the fix ends up being.. As always, thank you Jorge. Your assistance over the years has been invaluable

both of whicg are done on my post above.... Valuable input. It was a question directed @JorgeBwho seenmd to have running knowledge of the problem @itimpi Thanks for the suggestion, looks llike somethine Dynamix should have dev'd back in the day and just always been installled for me. Is now thanks toy ou!

I believe that I may be going through the same issue as the previous poster after reading his commentary. I had a sync complete yesterday and running again today, by chance I happened to notice an uptime of ~30hrs (found it strange but not much more of it), then parity running again so must rebooted unclean after the parity check. I was performing preliminaries and.... - Just went again now. Dumped diagnostics, traced syslog error, and headed for the forums, always with one eye checking for similar recent posts and I've arrived here. Should I start my own thread, perform HW diags, or look towards a common problem someplace? FTR, information of potential significance. Relevant log entries after tonight's reboot, (and attached diags were performed upon restart) yoda-diagnostics-20250131-2325.zip

I actually went as far as enabling a 3rd party service that's available for notifications. It's been the least reliable of all. But I don't want to waste your help on that topic. That's DIY 110% I replaced the sata cables and rejigged the power (but they're still sharing a string) and they're both offline still. Parity2 "in theory should" come green and be put of parity sync? Or won't know until next sync or forced? I'm 75% certain that drive 4 contained 0 user data. I'm unsure if this may or may not help at this point. I also don't understand the parity2 disk VS the potential disparity that might exist between P1 & P2 and how that all relates to device offline. I'm getting tired and confused now. But I've attached diags, and I'm going to grab a couple hours sleep. I caught this late which has turned into early. Im lost at what I should do next, if you could task me with "what now"? WWYD? I have many different sized hammers at the frustration that every problem that causes issues begins as a unnecessary self introduced error. I didn't need to be inside the case when I set this off. And because of how I responded I too don't precisely know occurred prior to the last time I saw all green - self error also yoda-diagnostics-20241103-0426.zip

Thanks Jorge that gives me a little confidence in my initial superstition. Part of the problem is that there wasn't a notification that something had occurred. So my reaction became "I've been stuffing around in there lately I'll just reboot and remove some excess usb drives etc" not the process I'd follow if I'd been presented with a failure notification alert "There's an issue, generate logs and investigate etc" I can never seem to manage an alert to respond to when something problematic occurs. It's me who notices when I login to the interface. Anyway I'll continue to Un-ruin my server (I shuffled alot of crap to "help"} and report back