bilben1

I am also randomly losing nfs shares and smb shares randomly since upgrading to 6.6 and also in 6.6.1.

Just a shoutout to Darkside40. The modified 3.0.6.1 sleep script that you posted is working properly now. Thank you.

Thanks for the modified script. I am also giving it a try. I disabled sleep for the moment. I installed the .txz file into the dynamic.s3.sleep folder on the flash drive and copied the .plg file overwriting the existing .plg file on the flash drive and restarted the plugin. Is that all that has to be done?

I believe I left the "suspend to ram" setting on auto. If the other setting is S3 that would be ok too.

Hi, I have an Asrock J1900m board and use s3 sleep. It seems to work pretty good. I have deep sleep 35 disabled in the bios and have no problem using wol to wake the machine.

Ver 3.04 S3 sleep working perfectly. I use the exclude hours setting, wait for inactive excluding the cache and networking less than 100kb/s settings. Thank you for make this version available again.

Hi S3 sleep was working perfectly until last update. Now it does not put system to sleep. My system has 4 spinning 1TB WD and Hitachi drives in the array and two ssd's drives set up in striped mode as cache. I have "Monitor disks outside of array" set to "none. In debug mode the sleep log reported the system went to sleep at the end of the set excluded hours but in fact the system remained active and accessible and never went to sleep. Appreciate your help and thank you for providing all of these great plugins. They are awesome to say the least.

Thank you for the timely response. I appreciate it.

Hi I've been using unRAID 6 since February of this year and I love it. I had tried Freenas 9.10 and Qnap and I was unhappy with both. unRaid is just exactly what I was looking for. I purchased a cheap Asrock J1900M MB and and additional iocrest 4 port pcie gen x 2 sata card (Marvell chipset) and using it with four old 1TB drives, i.e. 1 Hitachi and 3 WD greens. I am also using 2 60 gb ssd drives, one a kingston and the other a Patriot torq, as cache drives. The cache drives are attached to the mainboard headers, the spinners are connected to the marvell card. The drives all passed the smart tests. Everything worked great for about a month or two, however in the last week, the fix problems plugin has reported Call trace errors and the system actually crashed once and sleep no longer seems to work properly. For example the debug sleep log reported that the system went to sleep at midnight but in fact it did not. I have run a three day test on the installed 8gb of memory with memtest no errors were found. I have uploaded a diagnostic report including FCP syslog and a sleep log that has been generated after the system crash using the fix problems troubleshooting mode. I would appreciate any help. Thank you in advance tower-diagnostics-20170510-1307.zip s3_sleep.log FCPsyslog_tail.txt