bengele

Members
  • Posts

    37
  • Joined

  • Last visited

Everything posted by bengele

  1. Sorry im blind. i didnt see that. Thank you for your amzing work
  2. If you look at the following: you see that i mapped a folder inside of the container to the outside. With that the files are not overridden. You can do the same for the mod. Do you use unraid or general linux/Windows and run it via comandline?
  3. The Statisfactory Servers are released and im trying to get it running with the Generic SteamCMD Docker. Has anybody an idea how to point the serverstarting script to the FactoryServer.SH? "/opt/scripts/start-server.sh: line 68: /serverdata/serverfiles/srcds_run: No such file or directory" In my case its called "FactoryServer.sh" I tryed setting the GAME_NAME Value of the Docker to "Statisfactory" and "FactoryServer" without success PS.: i also get the weird Force_Install informations but i already assumed to ignore them also if you @ich777 want to create one Statisfactory Server Docker, here is the Template i used: Regards Bengele
  4. For anyone that has the problem with the nextcloudlog file that spinns up the drives: i could not get it to work with the PHP
  5. Dear all about the nextcloud.log file that spinns the drives up. There is a solution that i found while searching all the configfiles: Put in the config/config.php file 'logfile' => '/var/log/nextcloud.log', or whereever you want the logfile. Regards Bengele
  6. Dear all, i have a issue that my cam isnt working anymore. When i use the Motioneye Docker and use a "Simple MJPEG Camera" i can see the Picture. But when i use "Network Camera" it dont stops loading the picture. (the Network Cammera Mode is needed to have motion dedection) i use this link for the Cammera: http://192.168.189.34/videostream.cgi?user=SafetyCam200&pwd=XXXXXXXXXXXXX It worked one year flawless but now i dont see the picture in the cam anymore. What i tryed to do until now: Delete the Docker Removed the Appdata Config Folder Installed the Dock Here comparison between the modes. Same Problem. Has somebody an idea?
  7. Hi all, is there a way to include: Latest NGINX Plus (no extra build steps required) or latest NGINX open source built with the --with-stream configuration flag i want to Reverse Proxy a Teamspeak. MFG Bengele
  8. Dear all, im realy stuck in the Fan Speed Plugin. PWM controller is not found and at the same time i dont find temps of the Harddrives that are connected to the Mainbaord. The Most weird thing is that i can access the Temps over the Main: I did run sensors-detect but it found a sensor on "ID 0x8686" root@ben-server:/boot/config/plugins# sensors-detect # sensors-detect revision 6284 (2015-05-31 14:00:33 +0200) # System: Gigabyte Technology Co., Ltd. Z270P-D3 [Default string] # Board: Gigabyte Technology Co., Ltd. Z270P-D3-CF # Kernel: 4.18.20-unRAID x86_64 # Processor: Intel(R) Core(TM) i7-7700T CPU @ 2.90GHz (6/158/9) This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 16h thermal sensors... No AMD Family 15h power sensors... No AMD Family 16h power sensors... No Intel digital thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No Intel 5500/5520/X58 thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... Yes Found unknown chip with ID 0x8686 Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Some systems (mainly servers) implement IPMI, a set of common interfaces through which system health data may be retrieved, amongst other things. We first try to get the information from SMBIOS. If we don't find it there, we have to read from arbitrary I/O ports to probe for such interfaces. This is normally safe. Do you want to scan for IPMI interfaces? (YES/no): Probing for `IPMI BMC KCS' at 0xca0... No Probing for `IPMI BMC SMIC' at 0xca8... No Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): Found unknown SMBus adapter 8086:a2a3 at 0000:00:1f.4. Sorry, no supported PCI bus adapters found. Module i2c-dev loaded successfully. Next adapter: SMBus I801 adapter at f040 (i2c-0) Do you want to scan it? (YES/no/selectively): Client found at address 0x50 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... No Probing for `EDID EEPROM'... No Client found at address 0x52 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... No Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) Do you want to overwrite /etc/sysconfig/lm_sensors? (YES/no): no To load everything that is needed, add this to one of the system initialization scripts (e.g. /etc/rc.d/rc.local): #----cut here---- # Chip drivers modprobe coretemp /usr/bin/sensors -s #----cut here---- You really should try these commands right now to make sure everything is working properly. Monitoring programs won't work until the needed modules are loaded. Unloading i2c-dev... OK The command: modprobe it87 modprobe: ERROR: could not insert 'it87': No such device or: modprobe it87 force_id=0x8686 Did also not work... Im not a linux pro so i hope for help. The only thing that i got to work in System Temps is the CPU Core : Hope for help mfg Bengele
  9. Dear All, is there a way that i can run this plugin in tap mode? Regards Bengele
  10. Hello together, i got a gaming server project and want to use all ssd's in cache without parity. at the moment the cache sets up a parity drive for 2 cache drives. How can i disable that and use instead 2 Drives for cache Regards Bengele
  11. Well you got a point i need to look into the hackintosh supported hardware Gesendet von meinem LG-K220 mit Tapatalk
  12. Hello all, im thinking about switching over to Mac OS for my Main OS. When i switch to MAC OS i want to play every windows game. i was thinking about using Unraid: 1 VM Hackintosh + On Cpu Graphics 2 VM Win 10 + GTX 10XX So i can just use my Main OS and play on my windows machine via in homestreaming on the mac. Whats your thoughts about that? Regards Bengele
  13. I had this error once. Use Putty (or something elso to shh) and docker exec -it mariadb-nextcloud bash log in with you set up password and see what it gives you back. In my case it was a permission problem Regards Bengele
  14. Hello together, im struggling with my transfer of gulden-home.de/nextcloud to nextcloud.gulden-home.de How can i tell ngix to use the nextcloud config file for the nextcloud subdomain and for everything else the default? I get the 404 Error on nextcloud.gulden-home.de As in the tutorial i created an addition file "nextcloud" in the ..../appdata/letsencrypt/nginx/site-confs/ with the data as attached. But what i dont get it seems that the old configfile(default) responds still to gulden-home.de/nextcloud but the new configfile dont seem to work at all. If i type nextcloud.gulden-home.de/nextcloud my webpage also apears. Regards Bengele nextcloud default
  15. As long you are using https you are safe. 1. Banking Websites also use https and are fine. 2. Bruteforce attacks are covered by the lets encrypt docker with fail2ban 3. The weakness is ddos but that makes your website just unavalible and attacks inside your homenetwork Regards Bengele
  16. Yes Yes you just have to select it in the docker as data location Regards Bengele
  17. Hello Master, well the are combined packes wich includes the maria db but you need a database everywhere you want to create users and passwords. Nextcloud wont work without a database. Further more, if you want to use your nextcloud only in your local network its fine to skip on https and ssl but if you want to use it in the inernet you need to be aware that everybody can capture your data. Im also not sure if the certificates works with ipadresses instead of domains (https). Can you tell us maybe what your problem was with the old setup? what error did you get? Regards Bengele
  18. Well im just happy that its works again. It was pretty straight forward after i found the occ script of nextcloud. You can do a bunch of stuff with that and it tells you what the problem is Regards Bengele
  19. And now comes the solution: docker exec -it mariadb_nextcloud bash root@39e01f2500e2:/config# ls -l custom.cnf -rw-rw-rw- 1 abc users 3753 Mar 29 02:17 custom.cnf root@39e01f2500e2:/config# sudo chmod 644 custom.cnf Im still wondering what messed up my permissions and that was a hell of searching for solutions Thanks for you help Seige Regards Bengele
  20. also this is my list of addons: but on a integry check i got this: It seems he cant connect to my db anymore After googling the sql error it seems that my mariadb ignores the config: Then i tryed to lo into the docker and check the table Now the Question is why he ignores it Thaks for the help so far Regards Bengele
  21. Hello, since yesterday i got the following message from my ts: "s6-applyuidgid: fatal: unable to exec /config/ts3server: Permission denied" i tryed to fix it with the command: docker exec -it TeamSpeak3 bash chown -R abc:abc /config exit But i still got the error. Now i "fixxed" it with the command: chmod -R 777 teamspeak3 Whats the right config for it? Regards Bengele
  22. Hello Seige, im not sure hoe i should add the loggin feature: "log_type" => "owncloud", "logfile" => "nextcloud.log", "loglevel" => "0", "logdateformat" => "F d, Y H:i:s", if i add this i dont get an loggin file. Maybe i unterstoot something wrong. About the addons: yes i installed some like groupfolders and so on but no office addons. Regards Bengele