mspencerl87

First, Thanks for this wonderful application. Its very simple and clean. If i could get it to work I would be very happy . I want to start off saying i'm having issues, and i'm not sure what to troubleshoot. Issue: browsing to domains i get "502 Bad Gateway nginx" Setup: DuckDNS - Domains, filegardenspeed, spencer-webserver, NGINX Proxy Manager - Bridged Containers: Webserver - spencer-webserver.duckdns.org Speedtest - filegardenspeed.duckdns.org Router: Pfsense Forward Port 443 to 18443 (Nat+Proxy) Forward Port 80 to 1880 (Nat+Proxy) error.log https://pastebin.com/raw/qZJRh1AK ProxyManager Settings https://imgur.com/uV377VS https://imgur.com/NRw8ES5 Any advice is helpful Update: If i change the proxy host from hostname to bridged IP : 172.17.0.7:80 the page loads. Which is fine.. But i'd then have to set it statically? This seems like a docker issue with DNS resolution? I have the exact same problem when using letsencrypt container, but idk how to fix..

Dynamix System Temp issues posted on reddit. Is this the proper place to post for support? Issue below

The support link redirects to But there is no where to post? Do you have a link to create support post?

Anything i can do? See reddit post. Is this a Kernel issue, Mobo issue, or Ryzen issue? See below, how can i generate drivers.conf? Added 'modprob nct6775 0xd352 to go file. added sensors.conf to plugin folder #sensors chip "k10temp-pci-00c3" label temp1 "MB Temp" label temp2 "CPU Temp" i ran sensors-detect and got Trying family `VIA/Winbond/Nuvoton/Fintek'... Yes Found unknown chip with ID 0xd352 Then ran "sensors" and got: modprobe nct6775 0xd352^C and got k10temp-pci-00c3 Adapter: PCI adapter Tdie: +47.4°C (high = +70.0°C) Tctl: +57.4°C nct6795-isa-0a20 Adapter: ISA adapter Vcore: +1.42 V (min = +0.00 V, max = +1.74 V) in1: +1.02 V (min = +0.00 V, max = +0.00 V) ALARM AVCC: +3.34 V (min = +0.00 V, max = +0.00 V) ALARM +3.3V: +3.38 V (min = +0.00 V, max = +0.00 V) ALARM in4: +1.01 V (min = +0.00 V, max = +0.00 V) ALARM in5: +0.15 V (min = +0.00 V, max = +0.00 V) ALARM in6: +0.74 V (min = +0.00 V, max = +0.00 V) ALARM 3VSB: +3.33 V (min = +0.00 V, max = +0.00 V) ALARM Vbat: +3.25 V (min = +0.00 V, max = +0.00 V) ALARM in9: +1.82 V (min = +0.00 V, max = +0.00 V) ALARM in10: +0.00 V (min = +0.00 V, max = +0.00 V) in11: +0.74 V (min = +0.00 V, max = +0.00 V) ALARM in12: +1.16 V (min = +0.00 V, max = +0.00 V) ALARM in13: +0.68 V (min = +0.00 V, max = +0.00 V) ALARM in14: +1.51 V (min = +0.00 V, max = +0.00 V) ALARM fan1: 0 RPM (min = 0 RPM) fan2: 2428 RPM (min = 0 RPM) fan3: 1165 RPM (min = 0 RPM) fan4: 830 RPM (min = 0 RPM) fan5: 836 RPM (min = 0 RPM) fan6: 849 RPM (min = 0 RPM) SYSTIN: +33.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = CPU diode CPUTIN: +39.0°C (high = +110.0°C, hyst = +90.0°C) sensor = thermistor AUXTIN0: +41.0°C (high = +110.0°C, hyst = +90.0°C) sensor = thermistor AUXTIN1: -128.0°C sensor = thermistor AUXTIN2: +40.0°C sensor = thermistor AUXTIN3: -1.0°C sensor = thermistor SMBUSMASTER 0: +57.5°C PCH_CHIP_CPU_MAX_TEMP: +0.0°C PCH_CHIP_TEMP: +0.0°C PCH_CPU_TEMP: +0.0°C intrusion0: ALARM intrusion1: ALARM beep_enable: disabled