Jump to content

gatorgrabber

Members
 View Profile  See their activity

  • Posts

    20

  • Joined

  • Last visited

 Content Type 

Posts posted by gatorgrabber

    I suddenly seem to have a Parity drive that is disabled...(solved)

    in General Support

    Posted

    I appreciate the help, thanks! That part I understand but it also was giving me the same message (about the parity disk being invalid) yesterday morning before I started this thread. Perhaps the message this morning was a relic of the browser (not Unraid) holding the message in cache; I've seen that before. Well, all seems to be fine so I'll just let it be for now.

     

    Trurl mentioned having my system share stay the cache; any suggestions on that since I've got you?

    I suddenly seem to have a Parity drive that is disabled...(solved)

    in General Support

    Posted

    It was the alert (red) notification that the parity disc was invalid. I got the same report below this morning while the rebuild was in progress. After it was finished, all seems well??

     

     

    Unraid StatusNotice [TOWER] - array health report [FAIL]Array has 6 disks (including parity & cache)alert

    Parity - WDC_WD40EFRX-68N32N0_WD-WCC7K1ULAPSS (sde) - active 91 F [DISK INVALID]
    Disk 1 - WDC_WD30EFRX-68EUZN0_WD-WCC4N7JRHV3Z (sdg) - active 91 F [OK]
    Disk 2 - WDC_WD30EFRX-68EUZN0_WD-WCC4N6TL8FD5 (sdf) - active 93 F [OK]
    Disk 3 - WDC_WD30EFRX-68EUZN0_WD-WCC4N6LL04CK (sdd) - active 91 F [OK]
    Cache - CT1000MX500SSD1_1919E201FCEC (sdc) - active 88 F [OK]
    Cache 2 - CT1000MX500SSD1_1919E201F026 (sdb) - active 91 F [OK]

    Parity sync / Data rebuild in progress.
    Total size: 4 TB
    Elapsed time: 2 hours, 6 minutes
    Current position: 1.05 TB (26.2 %)
    Estimated speed: 132.7 MB/sec
    Estimated finish: 6 hours, 11 minutes
    Sync errors corrected: 0

    I suddenly seem to have a Parity drive that is disabled...(solved)

    in General Support

    Posted · Edited by gatorgrabber

    Well, I just wandered in and saw that my parity disk is actually in the green (active) and healthy, at least according to SMART. Parity was shown as valid...😕 I ran another diagnostics report and have attached it below. I haven't rebooted or modified it in any way, wary that I'll anger the disk gods hiding in my server!

     

    tower-diagnostics-20210411-0854.zip

    I suddenly seem to have a Parity drive that is disabled...(solved)

    in General Support

    Posted

    Thanks for the quick assistance! I'm setup for notifications, it's just that I don't see them when I'm in the field (wildlife biologist) until I get back in. Your step by step is very useful, thanks for that. My only question involves how to properly unassign the disk...that I don't want to screw up! Also, I have already shut down the server and checked the cables and power to make sure nothing was loose; nope. Thanks!

    I suddenly seem to have a Parity drive that is disabled...(solved)

    in General Support

    Posted · Edited by gatorgrabber

    I take a quick look at my Unraid box ( Supermicro X10SRH-CLN4F, Version 1.00A) every day and noticed this afternoon that I had a warning the Parity drive was disabled. I had just upgraded to 6.9.2 this morning, so I tried rebooting the computer to see if that would help...nope. I then looked to see if anything about the disk's health jumped out at me...undecided on that point, so I moved on. I then reverted to the last OS (6.9.1) to see if that changed anything...nope. I did download a couple of diagnostics ZIP files along the way, which I'll attach below. I'm by no means a Unraid guru, so it's time for professional help! I've been searching but I'm not crazy about just throwing things at the wall, hoping for a fix. The two things I listed above hopefully didn't make the situation worse. Any words of advice?

    tower-diagnostics-20210410-1621.zip tower-smart-20210410-2007.zip

    [Support] binhex - Plex Pass

    in Docker Containers

    Posted

    A followup to my previous post, along with my less than elegant solution. After lots of searching, I discovered linuxserver.io and installed the Digital Devices (Github) 6.8.0 image. This got binhex-plexpass running again but now it didn't recognize my WinTV-quad tuner card. After a few more quarters in the ol' swear jar, I utilized my best SWAG abilities and tried the LibreELEC 6.8.0 image...success! I'm not really sure how I got here but it's alive and running again. Happy New Year!

    [Support] binhex - Plex Pass

    in Docker Containers

    Posted

    I'd put off installing the 6.8 OS upgrade until this morning and have run into an issue with binhex-plexpass not starting (auto or manual). Since I'm an Unraid newbie, I'm hesitant to start tinkering without a bit of adult supervision. 😁 All plugins are up to date and the box has been restarted...no joy. I only have one docker container, the one for binhex-plexpass. Search has revealed several threads with somewhat similar issues but the solutions seem obscure. I was running 6.6.7 before the upgrade. Is there a thread that may help me with this issue? Thanks!

    binhex-plexpass will not start after 6.8 OS upgrade

    in General Support

    Posted

    I'd put off installing the 6.8 OS upgrade until this morning and have run into an issue with binhex-plexpass not starting (auto or manual). Since I'm an Unraid newbie, I'm hesitant to start tinkering without a bit of adult supervision. 😁 Since the sole purpose of this computer is Plex, I'd like to get it going again. All plugins are up to date and the box has been restarted...no joy. I only have one docker container, the one for binhex-plexpass. Search has revealed several threads with somewhat similar issues but the solutions seem obscure. I was running 6.6.7 before the upgrade. Do I install another docker container with binhex-plexpass installed there? Thanks for the help!

    Hardware migration issue at boot

    in General Support

    Posted

    I went to that location and the Unraid os box is already checked. The box is booting to the flash but still defaults to the command line in the blue box. I did notice the text in the area under unraid os (above) is different from what I'm seeing:

     

    kernel /bzimage
    append initrd=/bzroot

     

    Above has 'mitigations=off' after bzroot, if that means anything.

     

     

    Hardware migration issue at boot

    in General Support

    Posted · Edited by gatorgrabber

    I've been running Unraid on an older Xeon PC for the last couple of years with no real issues and finally decided to upgrade the hardware. I read quite a bit about moving to a different MB, so there was little drama with the migration. What is happening is when I restart the server, Unraid goes thru the lengthy setup process like I saw when it was first installed years ago, right down to asking what interface (command line, GUI, etc.) I would prefer. It never did this with the old box so I'm assuming there's a demon-tweak that I missed somewhere along the line. Once booted up, everything works just like before; smooth as silk. Any suggestion as to what I might need to modify? I'm hesitant to go rummaging around in the OS without adult supervision...that never ends well! Thanks

    [Support] binhex - Plex Pass

    in Docker Containers

    Posted · Edited by gatorgrabber

    New guy here. I've been browsing thru this thread, among others, and I'm not certain I see an answer. I just updated the OS to 6.7.2 from 6.6.7 and I've lost access to the Plexpass (binhex-plexpass). The docker will not start, auto or manually. All had been working great until this evening with both the server and Plex. The OS update went smoothly and I rebooted after it was finished. I still have full access to documents and other files on the server, just have no Plex. Any suggestions or links I can check out? Thanks!

×
×
  • Create New...