Long story short I replaced a cache drive that went into read only mode not sure why I think it filled 100% and unraid killed all dockers, burned up a flash drive stupidly by inserting a internal usb header into the wrong port on the board and replaced it. Got everything up and running overnight 100% recreated configs and dockers and rebuilt plex library all worked great and then the server was unreachable today. Restart the server, its still unreachable no ip, reboot everything modem router and all switches, take switch out of loop, new Ethernet cable no luck. So I move the flash drive to different port, recreate flash drive, recreate new flash drive I bought, set manual ip, no luck. Tried not copying configs just simple basic unraid same issue. Now when I ifconfig eth0 it says no device found, this was not an issue before just no ip, a few times it got a internet ip but was not view able in the router nor accessible via http://tower/. Verified bios settings, all normal, turned off VT-D as I read something in the logs about imouu causing instability and I have no setting for imouu and still no change. So I pulled diags and am lost beyond it cant obtain ip address, and doesnt see the onboard nic. I ordered a new intel Pro\1000 as Im betting my onboard nic died but curious if im just dumb.
Hardware
Motherboard: Asus Sabertooth x58
Nic: Realtek 8110sc
CPU: I7 960
Ram: 18gb ddr3 1600
Drives: 6 WD RED 8tb
Cache: Sandisk 960gb ultra 2, Sandisk 240gb ultra 3
Nic:realtek 8110sc
PSU: Corsair 850
USB Drive: multiple flash drives tried and ports all usb 2.0 as this board wont boot off 3.0
Thanks for any insight
tower-smart-20180207-0110.zip
tower-diagnostics-20180208-0054.zip
Turns out it was a failed ethernet port, something tells me my usb header fried it, intel 2 port 1000 fired right up with an Ip and im up and running!
FYI a Dlink 830T does not have a working driver in Unraid 6.4.1.
Thanks Johnnie for your support.