StuartF

Has anyone recently set up and self hosted S3 APi supported Storage. I have tried Minio server , but when i install i cant get into the admin settings to set up the relavent secret codes/keys. Has anyone tried this or anything simular. Im trying to run some self hosted api NCT toolkit and need S3 api so i can save the returned files. any help/advise would be appreciated?

hi , i have tried adding it as the below :- </disk> <disk type='block' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source dev='/dev/disk/by-id/wwn-0x50014ee25fdd1988'/> <target dev='hdc' bus='sata'/> <boot order='1'/> <address type='drive' controller='0' bus='0' target='0' unit='2'/> </disk> also selecting the 2 drives in the via IOMMU groups. Phison Electronics E16 PCIe4 NVMe Controller | Non-Volatile memory controller (01:00.0) I cant see the controller to pass though. Not sure if i can pass this raided array into unraid vm.

anyone ??????

Anyone? any ideas?

Hi all , hopefully someone can kindly help. I have a AMD 3700x CPU on a Asus x570 gaming WIFI motherboard and 2 x Sabrenth 1tb NVME drives using the onboard raid to make 1 x 2tb drive. I have moved from my old server to this machine , which i was running as a workstation. I would like to make a VM for Windows 11 and use the already set up machine in this VM , windows 11 on the nvme drives. I have tried to isolate the controller but all that seems to show is the 2x NVME drives and nt the controller itself? If i point the vm to boot from either drive it wont boot. i have my PCIe ACS override: set to both. Any advise ? what info do you need from me to help get this working? Running Unraid 6.12.6 Iommu attached. iommu.txt

HGST HW 0F22941 Hgst Ultrastar Hus726040als210 SAS is the drive i have , i will check teh byte size later , i only have the machine running unraid so cant check in windows.

Thankyou this has worked apart from the fact the drive i have is 4tb and its been formatted to 3tb?

Thanks , i dont seem to be able to find the compiled version or the app?

Any help would be appreciated , i'm sure its a parameter missing or something i'm not doing correctly?

hi , been trying to google it , need some techie help from anyone who knows about drives etc.

Getting this , not sure what i need to do next?

Cheers ill give it a go this weekend

thanks , im assuming id have to boot from a usb distribution to use this tool?

HI , any ideas on how to do this please?

Apr 27 18:31:50 Tower kernel: sd 5:0:1:0: [sdc] Unsupported sector size 520. Apr 27 18:31:50 Tower kernel: sd 5:0:1:0: [sdc] 0 512-byte logical blocks: (0 B/0 B) Apr 27 18:31:50 Tower kernel: sd 5:0:1:0: [sdc] 520-byte physical blocks Apr 27 18:31:50 Tower kernel: sd 5:0:1:0: [sdc] Write Protect is off Apr 27 18:31:50 Tower kernel: sd 5:0:1:0: [sdc] Mode Sense: cf 00 10 08 Apr 27 18:31:50 Tower kernel: sd 5:0:1:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA Apr 27 18:31:50 Tower kernel: sd 5:0:1:0: [sdc] Unsupported sector size 520. Apr 27 18:31:50 Tower kernel: sd 5:0:1:0: [sdc] Attached SCSI disk Apr 27 18:33:25 Tower emhttpd: device /dev/sdc has size zero Hi , fitted a new drive and im getting the above issues , i cant format the drive at all or do anything with it. I have a Dell T410 with the Perc 5 controller. Any help would be appreciated Thanks