3dee
-
Posts
61 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by 3dee
-
-
Hallo,
ich hab jetzt auch von 6.11.5 auf 6.12.8 geupgraded.
Wegen der macvlan Probleme habe ich nach dem Upgrade folgende Änderungen vorgenommen:
QuoteFor those users, we have a new method that reworks networking to avoid issues with macvlan. Tweak a few settings and your Docker containers, VMs, and WireGuard tunnels should automatically adjust to use them:
- Settings > Network Settings > eth0 > Enable Bonding = Yes or No, either work with this solution
- Settings > Network Settings > eth0 > Enable Bridging = No (this will automatically enable macvlan)
- Settings > Docker > Host access to custom networks = Enabled
Note: if you previously used the 2-nic docker segmentation method, you will also want to revert that:
- Settings > Docker > custom network on interface eth0 or bond0 (i.e. make sure eth0/bond0 is configured for the custom network, not eth1/bond1)
When you Start the array, the host, VMs, and Docker containers will all be able to communicate, and there should be no more call traces!
Das hat auch alles geklappt, Libvirt Wake On Lan hat den Status Running aber die VMs starten einfach nicht per WoL..
Die letzten Einträge in den Logs sind:
Mar 10 12:32:37 ServerPC emhttpd: read SMART /dev/sdb Mar 10 12:32:41 ServerPC ool www[26518]: /usr/local/emhttp/plugins/libvirtwol/scripts/wol_start Mar 10 12:32:42 ServerPC kernel: device virbr0 entered promiscuous mode Mar 10 12:32:52 ServerPC flash_backup: adding task: /usr/local/emhttp/plugins/dynamix.my.servers/scripts/UpdateFlashBackup update Mar 10 12:36:07 ServerPC emhttpd: read SMART /dev/sdh
-> Keine offensichtlichen Fehler im Log
Wo kann man denn mit dem Troubleshooting anfangen?
Danke!
-
/push
I'm worried about upgrading and need some help.
-
Hello everyone,
when I upgraded from unRAID 6.11.5 to 6.12.2 I had to experience macvlan call traces causing my server to crash. I tried with 2-nic docker segmentation method for my containers (br0 → br1) but this did not help, macvlan call traces still occurred, so I downgraded back to unRAID 6.11.5.
Now I am looking for a solution to keep individual IP-addresses per Docker Container (right now it's br1) but I also would like to upgrade to the newer unRAID versions (latest stable for now is 6.12.4). Many of my containers look like that (with different IP):
I am confused about the solutions on how go to use unRAID 6.12.4 without getting macvlan call traces.
For me it is important that some docker containers have their own IP-Address since I can prioritize specific devices in my Fritzbox (for example the IP-address of a torrent container is low priority but the IP-address of a teamspeak is high priority). If I am understanding correctly, this does not work with ipvlan. But I also am using Docker Compose Manager with some stacks and some custom networks.
I have taken a look into the release notes:
https://docs.unraid.net/unraid-os/release-notes/6.12.4/#fix-for-macvlan-call-tracesQuoteFor those users, we have a new method that reworks networking to avoid issues with macvlan. Tweak a few settings and your Docker containers, VMs, and WireGuard tunnels should automatically adjust to use them:
- Settings > Network Settings > eth0 > Enable Bonding = Yes or No, either work with this solution
- Settings > Network Settings > eth0 > Enable Bridging = No (this will automatically enable macvlan)
- Settings > Docker > Host access to custom networks = Enabled
Note: if you previously used the 2-nic docker segmentation method, you will also want to revert that:
- Settings > Docker > custom network on interface eth0 or bond0 (i.e. make sure eth0/bond0 is configured for the custom network, not eth1/bond1)
When you Start the array, the host, VMs, and Docker containers will all be able to communicate, and there should be no more call traces!
So when I follow these steps, will I still be able to give individual IP-addresses to my containers? After following these steps, will the IP-addresses stay the same or do I have to edit each container and setup the IP-address? Is there anything else to take care of except these steps (and the troubleshooting section)?
Thanks for reading into my questions!
-
On 8/10/2023 at 11:30 PM, 3dee said:
Hi guys,
I'm looking for a solution with a gallery-app, which allows to browse all the synced photos as if they were on the phone. Especially to safely clear up the phone from old photos, that already are synced to the server. Easy to browse. Just like Google Photos (and also iCloud I guess?).
Ideas?Immich is perfect for me!
Info:
https://immich.app/Installation:
https://immich.app/docs/install/unraid
There is no free up space on phone feature yet, but they have it on the plan:
https://github.com/immich-app/immich/issues/165#issuecomment-1575164317
⚠️ The project is under very active development.
⚠️ Expect bugs and breaking changes.
⚠️ Do not use the app as the only way to store your photos and videos.
⚠️ Always follow 3-2-1 backup plan for your precious photos and videos!
-
A couple of hours later it happened again
This time I was collecting the logs right after stopping the Array.I had issues stopping Docker Containers and stopping the Array (device busy but no lsof results). I was able to unmount manually via umount -l since -f didn't work.
The mover was doing some heavy Cache Pool I/O when the first BTRFS error occurred, just like the first time when this happened.
Nov 13 22:49:28 ServerPC move: file: //..g/... ### [PREVIOUS LINE REPEATED 4 TIMES] ### Nov 13 22:49:30 ServerPC move: file: //..p/... ### [PREVIOUS LINE REPEATED 6 TIMES] ### Nov 13 22:49:34 ServerPC move: skip: /mnt/nvme_pool/immich_gallery/thumbs/15c8cb25-0e87-4575-b952-a140ec2063fa/ee/16/ee169c32-9514-4527-81a8-45c1d6b1e199.jpeg Nov 13 22:49:34 ServerPC move: file: //..p/... ### [PREVIOUS LINE REPEATED 2 TIMES] ### Nov 13 22:49:35 ServerPC move: file: //..g/... Nov 13 22:49:36 ServerPC move: file: //..p/... ### [PREVIOUS LINE REPEATED 10 TIMES] ### Nov 13 22:49:41 ServerPC move: file: //..g/... Nov 13 22:49:41 ServerPC move: file: //..p/... ### [PREVIOUS LINE REPEATED 14 TIMES] ### Nov 13 22:49:48 ServerPC kernel: BTRFS error (device dm-8): parent transid verify failed on 484232986624 wanted 18446612690567976080 found 180123 ### [PREVIOUS LINE REPEATED 1 TIMES] ### Nov 13 22:49:48 ServerPC kernel: BTRFS: error (device dm-8: state A) in do_free_extent_accounting:2852: errno=-5 IO failure Nov 13 22:49:48 ServerPC kernel: BTRFS info (device dm-8: state EA): forced readonly Nov 13 22:49:48 ServerPC kernel: BTRFS: error (device dm-8: state EA) in btrfs_run_delayed_refs:2157: errno=-5 IO failure Nov 13 22:49:48 ServerPC rsyslogd: file '/mnt/user/syslog/syslog-192.168.1.10.log'[10] write error - see https://www.rsyslog.com/solving-rsyslog-write-errors/ for help OS error: Read-only file system [v8.2102.0 try https://www.rsyslog.com/e/2027 ] Nov 13 22:49:48 ServerPC rsyslogd: action 'action-3-builtin:omfile' (module 'builtin:omfile') message lost, could not be processed. Check for additional error messages before this one. [v8.2102.0 try https://www.rsyslog.com/e/2027 ] Nov 13 22:49:48 ServerPC rsyslogd: file '/mnt/user/syslog/syslog-192.168.1.10.log'[10] write error - see https://www.rsyslog.com/solving-rsyslog-write-errors/ for help OS error: Read-only file system [v8.2102.0 try https://www.rsyslog.com/e/2027 ] Nov 13 22:49:48 ServerPC rsyslogd: action 'action-3-builtin:omfile' (module 'builtin:omfile') message lost, could not be processed. Check for additional error messages before this one. [v8.2102.0 try https://www.rsyslog.com/e/2027 ] Nov 13 22:49:48 ServerPC rsyslogd: file '/mnt/user/syslog/syslog-192.168.1.10.log'[10] write error - see https://www.rsyslog.com/solving-rsyslog-write-errors/ for help OS error: Read-only file system [v8.2102.0 try https://www.rsyslog.com/e/2027 ] Nov 13 22:49:48 ServerPC rsyslogd: action 'action-3-builtin:omfile' (module 'builtin:omfile') message lost, could not be processed. Check for additional error messages before this one. [v8.2102.0 try https://www.rsyslog.com/e/2027 ] Nov 13 22:49:48 ServerPC rsyslogd: file '/mnt/user/syslog/syslog-192.168.1.10.log'[10] write error - see https://www.rsyslog.com/solving-rsyslog-write-errors/ for help OS error: Read-only file system [v8.2102.0 try https://www.rsyslog.com/e/2027 ] Nov 13 22:49:48 ServerPC rsyslogd: action 'action-3-builtin:omfile' (module 'builtin:omfile') message lost, could not be processed. Check for additional error messages before this one. [v8.2102.0 try https://www.rsyslog.com/e/2027 ]
Can you help me finding out what causes this problem? New diagnostics are attached..
Edit:
I will look into this: -
I also did this for the other disk (nvme1n1p1)
It worked, thank you!!! 🎉
-
Hello everyone,
today during some heavy load due to some mass-uploading to Immich, my Cache Pool became read only.
These were the steps I did after I realized there is something wrong:
- Stopped all Docker containers gracefully
- Disabled Docker
- Stopped the Array
- Restarted the System
- Started the array
- (Cache Pool still "Unmountable: No file system")
- Did some steps to recover files:mkdir /temp and mount -o rescue=all,ro /dev/mapper/nvme0n1p1 /temp worked for me
- cp -avr /temp /mnt/disk5/backup_unmountable
Right now I'm waiting for the copy / backup of my cache drive to finish.
The Cache Pool is btrfs encrypted and files are accessible for now.
So far, this is what happened.. But now I have two questions:
- Is there a way to find out why this happened?
- Can I fix the filesystem without reformatting? Should I use btrfs check --repair?
Diagnostics are attached.
Thanks and kind regards
-
On 9/28/2023 at 5:28 PM, 3dee said:
Application State: Unable to run
I was able to solve the issue.
It looks like srcds (or AMP) doesn’t like it’s files being written to fuse.shfs, but btrfs is fine. Using paths like /mnt/user/sharename is always shfs / fuse.shfs.
So basically all you need to do is change the appdata path (Container Path: /home/amp/.ampdata) from /mnt/user/appdata/amp/ to the actual appdata disk path. In my case, all the appdata is on a cache pool named "nvme_pool". My new path is /mnt/nvme_pool/appdata/amp/ and the srcds server starts up fine now.
-
On 4/26/2023 at 11:15 AM, Tommy90 said:
Hello, semi noob here,
I managed to set up a server with MC all okay however i'm trying to get Gmod going but it keeps failing
"Application State: Unable to run"
Hi @Tommy90,
have you been able to solve that issue? I'm having this issue with Counter Strike Source Dedicated Server.
At the Cubecoders Forum is a ticket for that, with Source Dedicated Server. Since this ain't a container supported by Cubecoders, we shouldn't capture this thread tho.
@CorneliousJD can you help us?
AMP Log:
Spoiler[12:16:23] [Logger Info] : Starting AMP version 2.4.6.4 (Decadeus), built 07/09/2023 18:02 [12:16:23] [Logger Info] : Stream: Mainline / Release - built by CUBECODERS/buildbot on CCL-DEV [12:16:23] [Logger Info] : Running in a Docker environment. [12:16:23] [Logger Warning] : Current time zone is set to CET - It is recommended you switch to UTC+0 to avoid time-zone related issues [12:16:23] [Logger Info] : OS: Linux / x86_64 [12:16:23] [Logger Info] : CPU: Genuine Intel(R) CPU 0000 @ 1.70GHz (10C/20T) [12:16:23] [Logger Info] : RAM: 32004MB [12:16:23] [Logger Info] : AMP Instance ID: xxxxxxxxxxxxxxxxxxxxx [12:16:24] [Logger Info] : Loaded srcdsModule version 1.0.0.1 by CubeCoders Limited [12:16:25] [Logger Info] : Metrics publishing is enabled at udp://localhost:12820. [12:16:25] [Logger Info] : Loaded FileManagerPlugin by CubeCoders Limited [12:16:25] [Logger Info] : Loaded EmailSenderPlugin by CubeCoders Limited [12:16:25] [Logger Info] : Loaded WebRequestPlugin by CubeCoders Limited [12:16:25] [Logger Info] : Loaded LocalFileBackupPlugin by CubeCoders Limited [12:16:25] [Logger Info] : Loaded CommonCorePlugin by CubeCoders Limited [12:16:25] [Logger Info] : srcdsModule requests dependency steamcmdplugin... [12:16:25] [Logger Info] : Loaded steamcmdplugin by CubeCoders Limited [12:16:25] [Logger Info] : srcdsModule requests dependency RCONPlugin... [12:16:25] [Logger Info] : Loaded RCONPlugin by CubeCoders Limited [12:16:25] [Logger Info] : Licence Present: AMP Professional Edition [12:16:26] [Logger Notice] : Using keypair with fingerprint xxxxxxxxxxxxxxxxxxxxx [12:16:26] [Logger Info] : SFTP Server started on 0.0.0.0:2224 [12:16:26] [Webserver Info] : Websockets are enabled. [12:16:26] [Logger Info] : Webserver started on http://127.0.0.1:8081 [12:16:26] [Logger Info] : RouterTimer@10Hz with 2 jobs started [12:16:26] [Core Info] : Checking for AMP updates... [12:16:26] [Logger Info] : Startup mode is UpdateAndStart. Redirecting stderr to '/home/amp/Steam/logs/stderr.txt' Logging directory: '/home/amp/Steam/logs' [ 0%] Checking for available updates... [12:16:27] [Core Info] : AMP is up to date. [----] Verifying installation... [12:16:29] [Logger:Anonymous Activity] : Authentication attempt for user admin from 127.0.0.1 [12:16:30] [Logger:Anonymous Activity] : Authentication failure for user admin from 127.0.0.1 - TokenRejected [12:16:30] [Logger:Anonymous Activity] : Authentication attempt for user admin from 127.0.0.1 [12:16:30] [Logger:Anonymous Activity] : Authentication failure for user admin from 127.0.0.1 - TokenRejected Steam Console Client (c) Valve Corporation - version 1694466999 -- type 'quit' to exit -- Loading Steam API...dlmopen steamservice.so failed: steamservice.so: cannot open shared object file: No such file or directory OK force_install_dir 232330 Connecting anonymously to Steam Public...OK Waiting for client config...OK Waiting for user info...OK app_update 232330 validate Update state (0x5) verifying install, progress: 0.00 (0 / 2297127618) Update state (0x5) verifying install, progress: 7.74 (177854216 / 2297127618) Update state (0x5) verifying install, progress: 18.61 (427438477 / 2297127618) Update state (0x5) verifying install, progress: 30.19 (693391039 / 2297127618) Update state (0x5) verifying install, progress: 41.24 (947248460 / 2297127618) Update state (0x5) verifying install, progress: 52.57 (1207672961 / 2297127618) Update state (0x5) verifying install, progress: 63.90 (1467851526 / 2297127618) Update state (0x5) verifying install, progress: 74.02 (1700378410 / 2297127618) Update state (0x5) verifying install, progress: 83.24 (1912136209 / 2297127618) Update state (0x5) verifying install, progress: 94.71 (2175539221 / 2297127618) Update state (0x5) verifying install, progress: 99.27 (2280451140 / 2297127618) Update state (0x5) verifying install, progress: 99.61 (2288169242 / 2297127618) Success! App '232330' fully installed. quit [12:17:03] [steamcmdplugin Info] : SteamCMD Update successful [12:17:06] [Logger Warning] : Server failed to start 1/5 times... [12:17:09] [Logger Warning] : Server failed to start 2/5 times... [12:17:12] [Logger Warning] : Server failed to start 3/5 times... [12:17:15] [Logger Warning] : Server failed to start 4/5 times... [12:17:18] [Logger Warning] : Server failed to start 5/5 times... [12:17:21] [Logger Warning] : Server failed to start 6/5 times... [12:17:21] [Logger Warning] : Server failed to start 5 times, not restarting. [12:17:55] [Logger Activity] : Authentication attempt for user admin from 127.0.0.1 [12:17:55] [Core Activity] : Authentication success [12:23:58] [Logger Activity] : Authentication attempt for user admin from 127.0.0.1 [12:23:59] [Core Activity] : Authentication success [12:25:28] [Logger:admin Activity] : Adding interval trigger 'Every Monday at 04:42' [12:25:39] [Logger Activity] : Authentication attempt for user admin from 127.0.0.1 [12:25:39] [Core Activity] : Authentication success [12:25:44] [API:admin Activity] : Starting the application. [12:25:47] [Logger:admin Warning] : Server failed to start 7/5 times... [12:25:47] [Logger:admin Warning] : Server failed to start 5 times, not restarting.
Application State: Unable to run
Thanks for help.
-
On 8/13/2023 at 6:09 PM, m.b.d said:
After Upgrading to 6.12.3 when i click on most of my dockers (Binhex-sonarr, binhex-sabnzbd, and binhex-radarr) i've lost the ability to open WebUI?
I can still direct open to the IP:port
Is this something that needs to be enabled?
You can fix that yourself:
1. Edit your sonarr container
2. Switch from Basic View to Advanced View (top right corner)
3. Fill this in WebUI: http://[IP]:[PORT:8989]/
-
Hi guys,
I'm looking for a solution with a gallery-app, which allows to browse all the synced photos as if they were on the phone. Especially to safely clear up the phone from old photos, that already are synced to the server. Easy to browse. Just like Google Photos (and also iCloud I guess?).
Ideas? -
On 6/23/2023 at 10:41 PM, page3 said:
Tried moving dockers to a second network card, but issues persisted.
Rolled back to 6.11.5 and all is good again. I’ll wait a while before thinking of upgrading again.
Same for me, moving containers from br0 to br1 did not solve macvlan call traces. I'm back on 6.11.5 again.
Let me know when it's safe to upgrade to 6.12.x
-
I also have traces since unRAID 6.12.2.
I connected another network cable, followed the guide and changed all the docker containers from br0 to br1.
Still call traces instantly after starting the array, making crash my docker containers and today even crashing the whole system.
I'm going back to 6.11.5 and recommend not to upgrade to 6.12.x
-
On 3/28/2023 at 9:05 PM, Taddeusz said:
@3dee I think there are registry settings to force RDP to use TLS 1.0/1.1 but I would consider that really the last thing you want to do if security is that important. It shouldn't be that huge of a problem if this computer is not directly on the internet.
On 3/29/2023 at 12:21 AM, CryoRig said:Fyi there is a update available for w7 which should enable tls1.2 for rdp sessions...
Have not tested it as i have no w7 machine
I did not find out how to force RDP to use TLS 1.0 nor 1.1.
I also had no success installing the KB3080079 update (yes, I have Service Pack 1, no, the update is not installed already, yes, I used x86 for my 32 Bit install).
I found out that RDP from my Windows 10 machine to the Win 7 VM already used TLS 1.2.
I was able to fix my issue with "RDP Wrapper Configuration". "Authentication Mode" is set from "Network Level Authentication" to "Default RDP Authentication".
Still, I'm happy that everything is working now again
Thanks!!!
-
I confirmed my Windows 7 NLA disable setting online, should be fine:
Still connection does not work
I tried all the Guacamole encryption settings, even the empty one..
It's always
RDP server closed/refused connection: SSL/TLS connection failed (untrusted/self-signed certificate?)
or
RDP server closed/refused connection: Server refused connection (wrong security type?)
-
This is fine.
I did this to Windows 7 RDP Settings:
What settings do I need to apply to the connection profile on Apache Guacamole?
-
26 minutes ago, Taddeusz said:
Can you connect to that machine from another Windows machine?
Yes:44 minutes ago, 3dee said:I also do not have any problems connecting to that Windows 7 VM from a Windows 10 client.
30 minutes ago, Taddeusz said:You might also look in the Windows logs to see if it shines any light on why it's not connecting.
Yes, there is an error:
Error ID 36874 - An TLS 1.2 connection request was received from a remote client application, but none of the cipher suites supported by the client application are supported by the server. The TLS connection request has failed.
Debug log:
usermod: no changes ---------------------- User UID: 99 User GID: 100 ---------------------- Using existing properties file. Using existing MySQL extension. Using existing TOTP extension. No permissions changes needed. Database exists. Database upgrade not needed. 2023-03-28 19:49:42,645 INFO Included extra file "/etc/supervisor/conf.d/supervisord.conf" during parsing 2023-03-28 19:49:42,645 INFO Set uid to user 0 succeeded 2023-03-28 19:49:42,657 INFO supervisord started with pid 23 2023-03-28 19:49:43,661 INFO spawned: 'guacd' with pid 24 2023-03-28 19:49:43,666 INFO spawned: 'mariadb' with pid 25 2023-03-28 19:49:43,670 INFO spawned: 'tomcat' with pid 26 guacd[24]: INFO: Guacamole proxy daemon (guacd) version 1.5.0 started guacd[24]: DEBUG: Successfully bound AF_INET socket to host 0.0.0.0, port 4822 guacd[24]: INFO: Listening on host 0.0.0.0, port 4822 2023-03-28 19:49:44,834 INFO success: guacd entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2023-03-28 19:49:44,834 INFO success: mariadb entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2023-03-28 19:49:44,835 INFO success: tomcat entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) guacd[24]: INFO: Creating new client for protocol "rdp" guacd[24]: INFO: Connection ID is "$29971d88-dccb-4b42-bca7-f00b42602492" guacd[112]: DEBUG: Processing instruction: size guacd[112]: DEBUG: Processing instruction: audio guacd[112]: DEBUG: Processing instruction: video guacd[112]: DEBUG: Processing instruction: image guacd[112]: DEBUG: Processing instruction: timezone guacd[112]: DEBUG: Processing instruction: name guacd[112]: DEBUG: Parameter "console" omitted. Using default value of 0. guacd[112]: DEBUG: Parameter "console-audio" omitted. Using default value of 0. guacd[112]: DEBUG: Parameter "disable-auth" omitted. Using default value of 0. guacd[112]: INFO: Security mode: NLA guacd[112]: DEBUG: User resolution is 1920x955 at 96 DPI guacd[112]: DEBUG: Parameter "dpi" omitted. Using default value of 96. guacd[112]: DEBUG: Using resolution of 1920x955 at 96 DPI guacd[112]: DEBUG: Parameter "force-lossless" omitted. Using default value of 0. guacd[112]: DEBUG: Parameter "read-only" omitted. Using default value of 0. guacd[112]: DEBUG: Parameter "client-name" omitted. Using default value of "Guacamole RDP". guacd[112]: DEBUG: Parameter "enable-wallpaper" omitted. Using default value of 0. guacd[112]: DEBUG: Parameter "enable-theming" omitted. Using default value of 0. guacd[112]: DEBUG: Parameter "enable-font-smoothing" omitted. Using default value of 0. guacd[112]: DEBUG: Parameter "enable-full-window-drag" omitted. Using default value of 0. guacd[112]: DEBUG: Parameter "enable-desktop-composition" omitted. Using default value of 0. guacd[112]: DEBUG: Parameter "enable-menu-animations" omitted. Using default value of 0. guacd[112]: DEBUG: Parameter "disable-bitmap-caching" omitted. Using default value of 0. guacd[112]: DEBUG: Parameter "disable-offscreen-caching" omitted. Using default value of 0. guacd[112]: DEBUG: Parameter "color-depth" omitted. Using default value of 16. guacd[112]: DEBUG: Parameter "disable-audio" omitted. Using default value of 0. guacd[112]: DEBUG: Parameter "enable-drive" omitted. Using default value of 0. guacd[112]: DEBUG: Parameter "drive-name" omitted. Using default value of "Guacamole Filesystem". guacd[112]: DEBUG: Parameter "drive-path" omitted. Using default value of "". guacd[112]: DEBUG: Parameter "create-drive-path" omitted. Using default value of 0. guacd[112]: DEBUG: Parameter "disable-download" omitted. Using default value of 0. guacd[112]: DEBUG: Parameter "disable-upload" omitted. Using default value of 0. guacd[112]: DEBUG: Parameter "enable-sftp" omitted. Using default value of 0. guacd[112]: DEBUG: Parameter "sftp-hostname" omitted. Using default value of "xxxxxxxxxxxxx". guacd[112]: DEBUG: Parameter "sftp-port" omitted. Using default value of "22". guacd[112]: DEBUG: Parameter "sftp-username" omitted. Using default value of "xxxxxxxxxxxxx". guacd[112]: DEBUG: Parameter "sftp-password" omitted. Using default value of "". guacd[112]: DEBUG: Parameter "sftp-passphrase" omitted. Using default value of "". guacd[112]: DEBUG: Parameter "sftp-root-directory" omitted. Using default value of "/". guacd[112]: DEBUG: Parameter "sftp-server-alive-interval" omitted. Using default value of 0. guacd[112]: DEBUG: Parameter "sftp-disable-download" omitted. Using default value of 0. guacd[112]: DEBUG: Parameter "sftp-disable-upload" omitted. Using default value of 0. guacd[112]: DEBUG: Parameter "recording-name" omitted. Using default value of "recording". guacd[112]: DEBUG: Parameter "recording-exclude-output" omitted. Using default value of 0. guacd[112]: DEBUG: Parameter "recording-exclude-mouse" omitted. Using default value of 0. guacd[112]: DEBUG: Parameter "recording-exclude-touch" omitted. Using default value of 0. guacd[112]: DEBUG: Parameter "recording-include-keys" omitted. Using default value of 0. guacd[112]: DEBUG: Parameter "create-recording-path" omitted. Using default value of 0. guacd[112]: INFO: Resize method: display-update guacd[112]: DEBUG: Parameter "enable-touch" omitted. Using default value of 0. guacd[112]: DEBUG: Parameter "enable-audio-input" omitted. Using default value of 0. guacd[112]: DEBUG: Parameter "gateway-port" omitted. Using default value of 443. guacd[112]: DEBUG: Parameter "disable-copy" omitted. Using default value of 0. guacd[112]: DEBUG: Parameter "disable-paste" omitted. Using default value of 0. guacd[112]: INFO: No clipboard line-ending normalization specified. Defaulting to preserving the format of all line endings. guacd[112]: DEBUG: Parameter "wol-udp-port" omitted. Using default value of 9. guacd[112]: DEBUG: Parameter "wol-wait-time" omitted. Using default value of 0. guacd[112]: INFO: User "@ff711ba9-0d5b-4687-8252-85669b2cb3ed" joined connection "$29971d88-dccb-4b42-bca7-f00b42602492" (1 users now present) guacd[112]: DEBUG: Sending Wake-on-LAN packet, and pausing for 0 seconds. guacd[112]: DEBUG: Client is using protocol version "VERSION_1_5_0" guacd[112]: INFO: Loading keymap "base" guacd[112]: INFO: Loading keymap "de-de-qwertz" guacd[112]: DEBUG: Support for CLIPRDR (clipboard redirection) registered. Awaiting channel connection. guacd[112]: DEBUG: Support for static channel "rdpdr" loaded. guacd[112]: DEBUG: Support for static channel "rdpsnd" loaded. guacd[112]: DEBUG: Support for RAIL (RemoteApp) registered. Awaiting channel connection. guacd[112]: DEBUG: Local framebuffer format PIXEL_FORMAT_BGRX32 guacd[112]: DEBUG: Remote framebuffer format PIXEL_FORMAT_RGB16 guacd[112]: DEBUG: transport_connect_tls:freerdp_set_last_error_ex ERRCONNECT_TLS_CONNECT_FAILED [0x00020008] guacd[112]: DEBUG: SVC "rdpdr" disconnected. guacd[112]: DEBUG: SVC "rdpsnd" disconnected. guacd[112]: INFO: RDP server closed/refused connection: SSL/TLS connection failed (untrusted/self-signed certificate?) guacd[112]: INFO: User "@ff711ba9-0d5b-4687-8252-85669b2cb3ed" disconnected (0 users remain) guacd[112]: INFO: Last user of connection "$29971d88-dccb-4b42-bca7-f00b42602492" disconnected guacd[112]: DEBUG: Requesting termination of client... guacd[112]: DEBUG: Client terminated successfully. guacd[24]: INFO: Connection "$29971d88-dccb-4b42-bca7-f00b42602492" removed.
Thanks for taking care so quickly!
-
8 minutes ago, Taddeusz said:
@3dee In the RDP connection settings there's an option, "Ignore server certificate", make sure it's checked.
Let me quote myself
12 minutes ago, 3dee said:"ignoring server certificate" is activated
12 minutes ago, 3dee said:It seems like my setting "ignoring server certificate" does not change anything since last update!
I tried disabling the setting and enabling again and tried restarting the container, no success so far.
-
Hello guys,
I'm using Apache Guacamole successfully since a while now, but since 23th of May (not sure when the container updated), it cannot connect to my Windows 7 VM anymore.
guacd[24]: INFO: Creating new client for protocol "rdp" guacd[24]: INFO: Connection ID is "$712d0578-a044-42d6-b9e9-27278c7b63e4" guacd[322]: INFO: Security mode: NLA guacd[322]: INFO: Resize method: display-update guacd[322]: INFO: No clipboard line-ending normalization specified. Defaulting to preserving the format of all line endings. guacd[322]: INFO: User "@dad3c51a-e6a3-420a-8964-6a883292e52b" joined connection "$712d0578-a044-42d6-b9e9-27278c7b63e4" (1 users now present) guacd[322]: INFO: Loading keymap "base" guacd[322]: INFO: Loading keymap "de-de-qwertz" guacd[322]: INFO: RDP server closed/refused connection: SSL/TLS connection failed (untrusted/self-signed certificate?) guacd[322]: INFO: User "@dad3c51a-e6a3-420a-8964-6a883292e52b" disconnected (0 users remain) guacd[322]: INFO: Last user of connection "$712d0578-a044-42d6-b9e9-27278c7b63e4" disconnected guacd[24]: INFO: Connection "$712d0578-a044-42d6-b9e9-27278c7b63e4" removed.
All my connection profiles to this VM are affected. Connections to a Windows 10 VM are not affected. Creating a new profile for this VM did not solve it. I made sure that the correct settings are made - but I didn't touch anything in the connection settings in the last year anyway - "ignoring server certificate" is activated. I also do not have any problems connecting to that Windows 7 VM from a Windows 10 client.
Is there a way to fix this? It seems like my setting "ignoring server certificate" does not change anything since last update!
-
13 minutes ago, Gingko_2001 said:
New updated docker, has this error log:
nginx: [emerg] "stream" directive is not allowed here in /etc/nginx/conf.d/stream.conf:3
please help how to fix this.
before has not issue with this.
read some of the posts above ↑
-
Thanks @BigBoyMarky, worked for me aswell!
Maybe kinda off topic, but how can I prevent Docker from pulling updates as soon as they are being released? Can I make docker wait x days after release until update? I have productive systems running I can't risk not to work after a fresh update with a potential bug
Update Check Frequency wouldn't really help since an update could be released just a moment before the Update check.
-
Moin zusammen,
ich bin auch gerade am Prüfen, wie man noch etwas Strom sparen könnte
Habt ihr eine Idee, warum mein E5-2630L v4 (Engineering Sample) nicht unter 1200MHz geht? Gibts da eine Stellschraube an der man noch drehen kann?
Ich konnte mittels "Power Save" statt "On Demand" dafür sorgen, dass die Kerne eher bei 1200MHz liegen und nicht mehr zwischen 1200 bis 2000 und damit etwa 5-10 Watt sparen.
SpoilerCPU Frequency Scaling Driver: Intel CPU Freq Governor: Power SaveSpoilerEvery 2.0s: grep "cpu MHz" /proc/cpuinfo ServerPC: Fri Nov 11 19:12:21 2022 cpu MHz : 1200.629 cpu MHz : 1200.594 cpu MHz : 1200.076 cpu MHz : 1200.267 cpu MHz : 1200.000 cpu MHz : 1200.093 cpu MHz : 1200.090 cpu MHz : 1200.372 cpu MHz : 1200.000 cpu MHz : 1200.000 cpu MHz : 1200.452 cpu MHz : 1200.000 cpu MHz : 1200.000 cpu MHz : 1200.118 cpu MHz : 1200.000 cpu MHz : 1200.053 cpu MHz : 1200.000 cpu MHz : 1200.000 cpu MHz : 1200.000 cpu MHz : 1200.037Und bekommt man eine GPU in den P12 State oder steht nur P8 zur Verfügung?
Danke und schöne Grüße
-
Works, thanks!
-
Hello,
I cannot start the container anymore, can you help?
[cont-init ] 10-vnc-password.sh: /etc/cont-init.d/10-vnc-password.sh: line 26: /opt/tigervnc/bin/vncpasswd: not found
[cont-init ] 10-vnc-password.sh: terminated with error 127.Spoiler[init ] container is starting... [cont-env ] loading container environment variables... [cont-env ] APP_NAME: loading... [cont-env ] APP_VERSION: loading... [cont-env ] DISPLAY: executing... [cont-env ] DISPLAY: terminated successfully. [cont-env ] DISPLAY: loading... [cont-env ] DOCKER_IMAGE_VERSION: loading... [cont-env ] GTK_THEME: executing... [cont-env ] GTK_THEME: terminated successfully. [cont-env ] GTK_THEME: loading... [cont-env ] HOME: loading... [cont-env ] QT_STYLE_OVERRIDE: executing... [cont-env ] QT_STYLE_OVERRIDE: terminated successfully. [cont-env ] QT_STYLE_OVERRIDE: loading... [cont-env ] TAKE_CONFIG_OWNERSHIP: loading... [cont-env ] XDG_CACHE_HOME: loading... [cont-env ] XDG_CONFIG_HOME: loading... [cont-env ] XDG_DATA_HOME: loading... [cont-env ] XDG_RUNTIME_DIR: loading... [cont-env ] container environment variables initialized. [cont-secrets] loading container secrets... [cont-secrets] container secrets loaded. [cont-init ] executing container initialization scripts... [cont-init ] 10-certs.sh: executing... [cont-init ] 10-certs.sh: terminated successfully. [cont-init ] 10-check-app-niceness.sh: executing... [cont-init ] 10-check-app-niceness.sh: terminated successfully. [cont-init ] 10-cjk-font.sh: executing... [cont-init ] 10-cjk-font.sh: terminated successfully. [cont-init ] 10-clean-logmonitor-states.sh: executing... [cont-init ] 10-clean-logmonitor-states.sh: terminated successfully. [cont-init ] 10-clean-tmp-dir.sh: executing... [cont-init ] 10-clean-tmp-dir.sh: terminated successfully. [cont-init ] 10-fontconfig-cache-dir.sh: executing... [cont-init ] 10-fontconfig-cache-dir.sh: terminated successfully. [cont-init ] 10-init-users.sh: executing... [cont-init ] 10-init-users.sh: terminated successfully. [cont-init ] 10-nginx.sh: executing... [cont-init ] 10-nginx.sh: terminated successfully. [cont-init ] 10-vnc-password.sh: executing... [cont-init ] 10-vnc-password.sh: creating VNC password file from environment variable... [cont-init ] 10-vnc-password.sh: /etc/cont-init.d/10-vnc-password.sh: line 26: /opt/tigervnc/bin/vncpasswd: not found [cont-init ] 10-vnc-password.sh: terminated with error 127. ** Press ANY KEY to close this window **
Libvirt wake on lan geht nicht mehr
in Deutsch
Posted
Danke für den Hinweis, das soll ja sogar mit Containern funktionieren
Ich habe das alte Libvirt Wake On Lan Plugin runter geschmissen und die neuen WoL4Services installiert. Damit klappt es leider genauso wenig..
Nach Deaktivieren und erneutem Aktivieren der VMs (Enable VMs unter VM Manager Settings) habe ich leider auch noch das folgende Problem:
root: '/mnt/user/system/libvirt/libvirt.img' is in-use, cannot mount
Vielleicht hängt das miteinander zusammen. So oder so scheint es weder für das eine, als auch für das andere eine (dauerhafte) Lösung zu geben