juanamingo

Hi all, I'm trying to consolidate several machines into one - specifically two gaming vm's with dedicated cards. I recently updated my hardware from a Xeon 8core x99 build to a 32 core Threadripper RPO The update went flawlessly, and it's been running solid for over a week. The board BIOS is up to date, 1.0C, BIOS settings are stock / default. I'm having issues with VM stability when using pass through graphics. I have a Quadro P2200 that's dedicated to Plex transcoding and then a GTX1080. (I also have a GTX 980 currently plugged in to check if it affects overall thermals, but all my testing below was used without the card in the system.) The 1080 is passed through to a freshly created Windows 10 VM, using a BIOS that I dumped from the card itself and removed the header from (per SIO's video). I have set it to 4 core / 8 thread (specifically cores 5/37, 7/39, 9/41, 11/43), 16GB RAM, Q35-5.1, USB 3.0 qemu XHCI, and the only usb devices passed through are the keyboard and mouse. I dumped the bios for both cards using GPUZ on an up to date Win 10 machine (non vm), and if it matters, I used HexFiend on a Mac to edit the ROM. The GTX 1080 came from this machine. I've run the Heaven benchmark for an hour and it's fine, so I believe the card is ok. My IOMMU groups are correctly separated from what I can see, each card is in it's own group. When starting the VM with the card passed through, it disappears from the NVidia Driver plugin page - as I would expect. When the VM is shut down or force stopped, it re-appears. I believe that is correct behavior. The card shows up in windows device manager, I've updated Windows completely before passing the card through, using VNC. I set up RDP and connected, installed the latest Nvidia driver (and GeForce experience) and everything seemed fine. Disconnecting from RDP and using a directly attached monitor (HDMI), and passed through kbd/mouse I can log in and everything seemed fine. I installed the latest MSI Afterburner, and everything seems within spec, GPU temp was around 53C. I installed Heaven benchmark and it ran for a few minutes then the screen garbled and went black. I can't get to the vm via monitor / keyboard, rdp or vnc. Recently I added VNC as the primary and the 1080 as the secondary graphics adapter to see if I could VNC to the machine when it "crashes", but nothing works. It's locked /crashed. If I force stop the vm, and restart it - I can get access again via monitor / RDP / VNC. Any time I try anything graphically intensive, I get this crash / hard lockup on the VM within a few minutes. Any thoughts or suggestions on what else to check? I've attached diagnostics from after the crash / force stop of the vm. guardian-diagnostics-20220126-1625.zip

No worries on that - it just stood out as odd to me is all. It could be that the other did the same and i had just rebooted, so uptime was low. I'm getting old, so let's go with bad memory =) I was reading it as there was about 50% cpu usage, and this is what top is showing now, and the ui I'm guessing now that the use is host related - not container related - just as the uptime.

It's been a while since i used the UI - and granted, it was a different docker - but have a couple of questions. 1) The uptime - i thought i remember it being the container uptime, not the server uptime? 2) The load averages - on a fresh install (no servers etc), unless i'm reading them wrong - they seem like they're high? The UnRaid dashboard, top and htop aren't showing any weird usage.

(...The Castle of ) aaarrrrggh. Oooohoohohooo!.... No, no. 'Aaaauugggh', at the back of the throat. Aaauugh. N-- no. No, no, no, no. 'Oooooooh', in surprise and alarm. Nope... I think I'm the peasant now..... My browser auto-filled the user as `root` because of the last mineos container and i didn't think to change it... `nobody` worked! (I figured `Arrrgh` fit well with my reaction when I realized i was dumb) Thanks again man!

Help! Help! I'm being repressed! /appdata is on the cache drive already, but i did change it to use /mnt/cache/appdata/binhex-mineos-node and started it. At the login using root / mineos and: Have to restart the container to get back to the login or I get:

Ahh! Now we see the violence inherent in the system!

Hey man, first off - thanks for all the work you do with all your docker images! Much appreciated. Secondly.... "Ni"! Finally, to my issue.... i just did a fresh install of this image, changed nothing on the install (not even the pw - and none of the ports are conflicting) and get to the login, login with root / mineos and get a `This site can't be reached` and the web ui seems to have crashed - have to restart it to access the login. Can't get in no matter what. Any suggestions (anything else i can provide detail wise to help troubleshoot)? Thanks in advance!

I'm having the same issue and not only does typing the '|' character ('shift + \' ) produce '>' and not the expected '|' but the '<' key ('shift + ,') also produces '>' and not the expected '<'. typing the non-shifted characters works fine, \ and , I've tried the browser vnc, tight vnc and tiger vnc. unraid 6.5.3 arch linux typing 'SHIFT + \' produces '>' and 'SHIFT + <' produces '>' ubuntu 14.04 typing 'SHIFT + \' produces '>' and 'SHIFT + <' produces '>' osx high sierra both 'SHIFT + \' and 'SHIFT +' , produce a '+' over top a '_' (a "plus-minus" symbol if you will) windows 10 - the '\' and '|' can be typed fine, but 'SHIFT + ,' produce '|' instead of '<' and 'SHIFT + .' produce '|' instead of '>' If any logs or anything are needed, please lmk