Spaceherpe

Members
 View Profile  See their activity

  • Posts

    50

  • Joined

  • Last visited

 Content Type 

Posts posted by Spaceherpe

    Slow Parity Rebuild

    in General Support

    Posted

    My original drive failed. I replaced it with a brand new drive, fresh out of the box. It was doing parity rebuild, but going at only 200kbps. I replaced the cable, and rebooted. Now it shows drive disabled, contents emulated.

    I have turned off my parity check in scheduler, to prevent the parity being replaced without the missing files from my failed drive. 

     

    I don't know why the brand new drive isn't working, nor do I know how to have it rebuild the filesystem. I'm really novice at this stuff.

     

    Slow Parity Rebuild

    in General Support

    Posted

    9 minutes ago, trurl said:

    I would actually say this differently. Format creates an empty filesystem. But you are rebuilding the filesystem with its files. There is never any actual format operation done during rebuild.

    Many people seem to have a misunderstanding of "format", thinking it means something like "prepare this disk for use" whatever that vague phrase might mean. Format actually means "write an empty filesystem to this disk". That is what it has always meant in every operating system you have ever used. Unraid treats a format exactly like it does any other write operation, by updating parity. So after formatting a disk in the array, parity agrees that the disk has an empty filesystem. If you then rebuild from parity the result is an empty filesystem. This is why

    In fact, you MUST NOT.

     

    Rebuild always starts from the beginning. Are you rebuilding an empty filesystem?

    The new drive is literally out of the box.

    Slow Parity Rebuild

    in General Support

    Posted

    1 hour ago, johnnie.black said:

    Was going to say there are a couple of ATA errors but nothing that would justify those speeds, apparently you got a bad disk.

     

    Looks like you already formatted disk1? Or was it empty already?

    Brand new, fresh out of the box. 

     

    If I stop the parity rebuild, will it pick back up automatically after I change out the cable? How do you recommend shutting down the server to swap the cable so the parity will pick back up?

     

    Slow Parity Rebuild

    in General Support

    Posted

    18 minutes ago, Frank1940 said:

    You NEVER  need to format a drive on a data rebuild.   It occurs automatically as the drive is rebuilt!   In fact, if you format the drive you will actually lose ALL of data which was previously on that drive!!!

    News to me. Thanks for educating me! I've been running my server for a few years now, but still consider my self a complete novice. It's great when it works, and when it doesn't...all of you here on this forum help and make it great again!

     

    Thank you all!!!

    Slow Parity Rebuild

    in General Support

    Posted · Edited by Spaceherpe

    So i had a drive fail. Removed the old drive, popped in a new drive and the system began rebuilding the new drive without asking me to format the new drive first. The drive rebuild is going unGodly slow, between 500kbps and 4mbps.

    I'm worried that if I interrupt the rebuild to format the drive on a separate computer then return the drive for the server to rebuild, it will ignore the parity and not rebuild the drive.

     

    Suggestions?

    Port Mapping Issue

    in General Support

    Posted

    I do still have a rather long ip list, but suspect that is due to the number of people I share with at any given time. I can't confirm if this is the case or not, but that is my suspicion. The system is working fine now, and I have installed updates since reinstalling it from the template, and have not had the same play issues again.

    Port Mapping Issue

    in General Support

    Posted · Edited by Spaceherpe

    Kgregg,

     

    So what I ended up doing was deleting the PLEX Docker and reinstalling it from the template I had previously installed PLEX with. Didn't make any changes to the template. Everything works fine now.

    Can't remove Advanced Buttons

    in General Support

    Posted

    I forgot to mention that I have attempted to use the "remove pluggin" function, each time it says it ran successfully, reloads and the Advanved Button icon returns or the white window that pops up is completely blank.

     

    I'm a fairly novice user, so if you have any suggestions, please walk me through it.

     

    Thank you!

     

     

    Can't remove Advanced Buttons

    in General Support

    Posted

    So I have deleted the file but upon reboot, it returns? 

    I used Krusader to locate all instances and when I go to each location, it either doesn't exist or is a blank folder, that again, when deleted, returns.

     

    When using Fix Common Problems application, it says: "

     

     

    advanced.buttons.plg Not Compatible with unRaid version 6.5.2-rc1 The author (or moderators of Community Applications) of the plugin template (https://raw.githubusercontent.com/gfjardim/unRAID-plugins/master/plugins/advanced.buttons.plg) has specified that this plugin is incompatible with your version of unRaid (6.5.2-rc1). You should uninstall the plugin here: Maximum OS Version: 6.4.0

     

    I'm at a complete loss. I've tried to use the ignore warning option, but each time I reboot, it returns. 

     

    Port Mapping Issue

    in General Support

    Posted

    After updating to Unraid 6.5.0, I updated my dockers and Plex now shows a ton of port mapping addresses. My shows are now being interrupted on playback. Anyone with an idea on what is happening and how to fix it, please let me know...


     

    plexinc-pms-docker-latest-icon.png
    		PlexMediaServer  up-to-date host 192.168.1.150:1900/udp192.168.1.150:1900
    192.168.1.150:3005/tcp192.168.1.150:3005
    192.168.1.150:32400/tcp192.168.1.150:32400
    192.168.1.150:32410/udp192.168.1.150:32410
    192.168.1.150:32412/udp192.168.1.150:32412
    192.168.1.150:32413/udp192.168.1.150:32413
    192.168.1.150:32414/udp192.168.1.150:32414
    192.168.1.150:32469/tcp192.168.1.150:32469
    192.168.1.150:8324/tcp192.168.1.150:8324         		/transcode/mnt/user/appdata/PlexMediaServer/
    /data/mnt/user/appdata/PlexMediaServer/
    /ScubaPlex/mnt/user/ScubaPlex/
    /config/mnt/user/appdata/PlexMediaServer

    Proper Cache Configuration

    in General Support

    Posted

    I am 100% sure that this question has already been asked and answered, but with so many threads, finding it has proven difficult...

     

    Anyways, here goes...

     

    I am running 3.6.4 due to issues with 3.6.5 and the power down/reboot function looping. That being said, my system consists of 3 (4tb storage) drives, 1 (4tb) parity and 1 (256gb ssd) cache drive. the current settings for my shares have system, appdata and domains in the "prefere" position for the cache drive. all other drives are listed in the "no" position. When I send files to the server wirelessly from another computer they are written directly to the storage discs instead of the cache and moved later by the mover. I am unsure what setting I have incorrectly set that is not allowing added files to be sent to the cache drive and moved later?

     

    Lastly, the server is primarily used for my Plex data library. I am afraid to list the plex share in any other configuration for fear of messing something up on the server. Any help with this would be greatly appreciated and thank you for all that you do for the community!

     

     

    arraydevices.pngArray Devices
    Device Identification Temp. Reads Writes Errors FS Size Used Free View
    green-on.pngParity WDC_WD40EFRX-68N32N0_WD-WCC7K0XNARD3 - 4 TB (sdd) 72 F 265,161 265,384 0  
    green-on.pngDisk 1 WDC_WD40EFRX-68N32N0_WD-WCC7K3KS33U9 - 4 TB (sdc) 88 F 1,149,841 277,801 0 xfs 4 TB
    2.98 TB
    		1.02 TB explore.png
    green-on.pngDisk 2 WDC_WD40EFRX-68N32N0_WD-WCC7K2EFJ56K - 4 TB (sdb) 90 F 944,833 73,378 0 xfs 4 TB
    2.43 TB
    		1.57 TB explore.png
    green-on.pngDisk 3 WDC_WD40EFRX-68N32N0_WD-WCC7K6XATD2R - 4 TB (sde) 84 F 85,488 55 0 xfs 4 TB
    2 TB
    		2 TB explore.png
    sum.pngTotal Array of four devices 83 F 2,445,323 616,618 0   12.0 TB
    7.41 TB
    		4.59 TB  

     

    cachedevices.pngCache Devices
    Device Identification Temp. Reads Writes Errors FS Size Used Free View
    green-on.pngCache SAMSUNG_470_Series_SSD_S0MTNEAB502605 - 256 GB (sdf) 84 F 499,421 2,658,477 0 btrfs 256 GB
    16.4 GB
    		240 GB explore.png

     

    bootdevice.pngBoot Device
    Device Identification Temp. Reads Writes Errors FS Size Used Free View
    green-on.pngFlash v125w - 4.01 GB (sda) * 342 84 0 vfat 4 GB
    176 MB
    		3.83 GB explore.png

    tower-diagnostics-20180105-2328.zip

    Dockern Not Enabled

    in General Support

    Posted

    so, I am really a noob when it comes to this. My friend set up the server for me. I just use it for my Plex Library at home and with friends. As far as starting the server, I'm really lost. I was able to reduce the number of drives available down to just one slot more than the number of drives I have. I don't know how to do what you are recommending.

    Dockern Not Enabled

    in General Support

    Posted

    My Docker screen has gone completely blank. Like no buttons no previously downloaded Dockers, just a blank screen. Below is a cut/paste of the log, which shows tons of errors. I attempted to revert from 6.3.5 back to 6.3.4 due to the reboot and stability issues and followed Squid's directions on another post to revert, then my docker page disappeared. Additionally, when I go to download new plugins, any Docker plugins are in red with "Docker Not Enabled" in bold red letters.

    I run a PLEX Server and have temporarily added a plugin, but I need my dockers back to reestablish my Plex Docker and Krusader.

    Any help would be greatly appreciated.

    Dec 28 01:09:55 Tower root: truncate: cannot open '/mnt/disk10/system/docker/docker.img' for writing: No such file or directory
    Dec 28 01:09:55 Tower root: mount: /mnt/disk10/system/docker/docker.img: failed to setup loop device: No such file or directory
    Dec 28 01:09:55 Tower root: mount error
    Dec 28 01:09:55 Tower emhttp: err: shcmd: shcmd (256): exit status: 1
    Dec 28 01:09:56 Tower kernel: BTRFS error (device sdd1): parent transid verify failed on 24854528 wanted 2465 found 2440
    Dec 28 01:09:56 Tower kernel: BTRFS error (device sdd1): parent transid verify failed on 24854528 wanted 2465 found 2440
    Dec 28 01:09:56 Tower kernel: BTRFS error (device sdd1): parent transid verify failed on 24854528 wanted 2465 found 2440
    Dec 28 01:09:56 Tower shfs/user: err: shfs_readdir: fstatat: domains (5) Input/output error
    Dec 28 01:09:56 Tower kernel: BTRFS error (device sdd1): parent transid verify failed on 24854528 wanted 2465 found 2440
    Dec 28 01:09:56 Tower root: Fix Common Problems Version 2017.12.11a
    Dec 28 01:09:57 Tower shfs/user: err: shfs_readdir: fstatat: domains (5) Input/output error
    Dec 28 01:09:57 Tower kernel: BTRFS error (device sdd1): parent transid verify failed on 24854528 wanted 2465 found 2440
    Dec 28 01:10:06 Tower kernel: BTRFS error (device sdd1): parent transid verify failed on 24854528 wanted 2465 found 2440
    Dec 28 01:10:06 Tower shfs/user: err: shfs_readdir: fstatat: domains (5) Input/output error
    Dec 28 01:10:06 Tower emhttp: err: get_filesystem_status: scandir: Input/output error
    Dec 28 01:10:06 Tower emhttp: shcmd (270): set -o pipefail ; /usr/local/sbin/mount_image '/mnt/user0/system/docker/docker.img' /var/lib/docker 20 |& logger
    Dec 28 01:10:06 Tower root: truncate: cannot open '/mnt/disk10/system/docker/docker.img' for writing: No such file or directory
    Dec 28 01:10:06 Tower root: mount: /mnt/disk10/system/docker/docker.img: failed to setup loop device: No such file or directory
    Dec 28 01:10:06 Tower root: mount error
    Dec 28 01:10:06 Tower emhttp: err: shcmd: shcmd (270): exit status: 1
    Dec 28 01:10:06 Tower kernel: BTRFS error (device sdd1): parent transid verify failed on 24854528 wanted 2465 found 2440
    Dec 28 01:10:06 Tower kernel: BTRFS error (device sdd1): parent transid verify failed on 24854528 wanted 2465 found 2440
    Dec 28 01:10:06 Tower kernel: BTRFS error (device sdd1): parent transid verify failed on 24854528 wanted 2465 found 2440
    Dec 28 01:10:06 Tower root: Fix Common Problems Version 2017.12.11a
    Dec 28 01:10:07 Tower shfs/user: err: shfs_readdir: fstatat: domains (5) Input/output error
    Dec 28 01:10:07 Tower kernel: BTRFS error (device sdd1): parent transid verify failed on 24854528 wanted 2465 found 2440
    Dec 28 01:10:17 Tower shfs/user: err: shfs_readdir: fstatat: domains (5) Input/output error
    Dec 28 01:10:17 Tower kernel: BTRFS error (device sdd1): parent transid verify failed on 24854528 wanted 2465 found 2440
    Dec 28 01:10:30 Tower shfs/user: err: shfs_readdir: fstatat: domains (5) Input/output error
    Dec 28 01:10:30 Tower emhttp: err: get_filesystem_status: scandir: Input/output error
    Dec 28 01:10:30 Tower kernel: BTRFS error (device sdd1): parent transid verify failed on 24854528 wanted 2465 found 2440
    Dec 28 01:10:30 Tower emhttp: shcmd (284): set -o pipefail ; /usr/local/sbin/mount_image '/mnt/user0/system/docker/docker.img' /var/lib/docker 20 |& logger
    Dec 28 01:10:30 Tower root: truncate: cannot open '/mnt/disk10/system/docker/docker.img' for writing: No such file or directory
    Dec 28 01:10:30 Tower root: mount: /mnt/disk10/system/docker/docker.img: failed to setup loop device: No such file or directory
    Dec 28 01:10:30 Tower root: mount error
    Dec 28 01:10:30 Tower emhttp: err: shcmd: shcmd (284): exit status: 1
    Dec 28 01:10:30 Tower kernel: BTRFS error (device sdd1): parent transid verify failed on 24854528 wanted 2465 found 2440
    Dec 28 01:10:30 Tower kernel: BTRFS error (device sdd1): parent transid verify failed on 24854528 wanted 2465 found 2440
    Dec 28 01:10:30 Tower kernel: BTRFS error (device sdd1): parent transid verify failed on 24854528 wanted 2465 found 2440