therapist
Members
-
Joined
-
Last visited
Everything posted by therapist
-
Formatting an SSD to ext4 and using under Unassigned Devices would be a viable alternative? Can a cache disk be reformatted to ext4 if so?
-
Recently upgraded with a DAS w/ SAS2-826EL1 backplane & LSI 9207-8e HBA to allow for TRIM support on SSDs. I currently have an 850 EVO 500gb (sdb) as my cache drive on motherboard SATA port which is working 100% & have an 850 EVO 250gb (sdl) on the DAS but have not been able to get TRIM working. I formatted the 250gb ext4 after doing some reading under the impression that this filesystem allows for TRIM, but I would like to move my cache drive to 6gb/s HBA as opposed to the 3gb/s my motherboard allows. The Broadcom compatibility guide lists both drives as compatible with 9207-8e, so is there any guidance as to what I may be doing wrong or missing?
-
upgraded my cache from single 500gb SSD on HBA to PCI-e SUN accelerator card w/ 4 independent SSDs. Install is fine, converted to RAID 0 pool, and now shares no longer report as having "unprotected" files. Does unraid see a cache pool and now think it is in RAID 1 although I converted?
-
I think you may be running into a limitation of the storj CLI See attached doc from storj FAQ/guides
-
I installed this docker when released & followed the guide to get operational...but it doesnt seem to be doing anything? I have 500gb shared on my UD drive w/ the access mode set to R/W slave, ports 4000-4003 on pfsense opened and mapped to internal IP Daemon says it is connected but I dont see any data being stored. Any tips?
-
Worked like a charm... Had a feeling I could use that, but it was populated automatically last build so I figured I'd ask UPS load is close to reading on upstream Kill-A-Watt
-
I was keeping this plugin up to date & was happy with the added "nominal power" functionality released in 2018.01.03 The latest update seems to have broken that functionality....any advice on how to get "nominal power" and "UPS load" displayed properly again
