LFTech

Members
  • Posts

    40
  • Joined

  • Last visited

Everything posted by LFTech

  1. I am curious as well to some of the questions you asked. Planning to upgrade my server over the holidays and planning to rebuild my unRAID from the ground up. Will be adding a Win11 VM to use as my daily driver but trying to figure out which GPU to use for VM vs unRAID, how to optimize my plex, etc. So much info out there LOL
  2. Thanks for the guidance and input. I was having troubles getting the docker to restart and simply looking at the Supervisord.log pointed me to the issue. The new openvpn files I copied over had the wrong extension. When I edited it the extension didn't change properly. Now it appears to be working again. Now to getting all the torrents back loaded in. I appreciate you pointing me to the .log file.
  3. hey binhex! Great apps, and thanks for all the support! I use the qbittorrentvpn docker on unRAID and as of a few days ago it completely stopped working. I use Mullvad VPN and everything worked great for months and months. One day a torrent wouldn't connect and I tried restarting the container and rebooting the whole server and since then I have been unable to get it to connect. Finally today I removed the entire container and started fresh, and still no luck loading. Is Mullvad config as openvpn no longer supported? Not sure what else it could be. Any help is appreciated!
  4. Unless I am completely blind or missing something that link doesn't go to a specific procedure. Trying to set up Mullvad and qbittorrentVPN in unRAID Docker.
  5. Does anything look problematic in the settings?
  6. I actually did not try starting from the dashboard, only the array operation page. It appears that when stopping and starting the array, it can be done from both the Dashboard and Array Operations without entering a key, once a key is entered at bootup. After a reboot, the array can be started regardless of encryption key from the dashboard. . On the Array Operation page, the array can only be started after an encryption key is set. Reopening report as it appears the behavior is not consistent and is a bug.
  7. Sorry I missed this. Here is a pic of my docker settings. https://imgur.com/MT4bA7X I feel like it could be something stupid simple but I can't figure it out.
  8. Okay, cool. Thanks. Since it appears there is no bug and all the behavior is expected I will close the ticket. Thanks everyone for the input and guidance!
  9. With none of my devices encrypted and the default file system sent to encrypted, would it be required to enter, and re-enter an encryption key every time I want to start the array? Is the encryption key not saved and stored after starting the array?
  10. So as noted above and expected, entering a new passphrase did resolve the issue and allow me to start the array. I checked the filesystem of every disk and all my disks are XFS and my cache drive is BTRFS. None of the are *-encrypted. In my disk settings, the default file system is xfs-encrypted however none of my disks are indicating they are xfs-encrypted. Should the encryption key be required just due to the default file system setting? Looks like I may have to do some maintenance and encrypt my disks. However it does appear this issue is closed.
  11. I removed the plugin as it also had issues and doesn't appear to have been updated in awhile. I do prefer to have encrypted volumes as I believe thats best practice. I will do some further investigating and update the post.
  12. Would this passphrase not be required to start the array after a fresh restart or if using the power menu to start the array? I have never entered a passphrase. Admittedly I do not know much about the encryption ability however I would expect the start array option to function the same regardless how it is initiated or when. I just preformed a fresh restart and although the start was greyed out under array operations, using the red circle button in top right and selecting start array successfully started the array as expected.
  13. I have tried the syntax squid provided with no luck. I was able to pass through device out of the box with another container and have seen no issues. Unfortunately extra parameters appears to not operate the same with this container with the --device parameter.
  14. After server runs for awhile or GUI is used, the red power menu from the top right that allows array operations, reboots, etc. disappears randomly. Only way to restore it is to reboot. unRAID OS Plus v 6.7.2
  15. Since upgrading, if I stop the array to change settings or anything, I am unable to Start the array back up. Screenshot can be found here: https://imgur.com/NiqIRBL. The red power button in top right corner would allow me to start the array if it were present, but I need to submit another bug report where it disappears randomly. EDIT 1: Running unRAID OS Plus v. 6.7.2
  16. --device /dev/sr0 --device /dev/sg6. I have tried multiple different ways include --device=...
  17. Has anyone had any luck passing their Optical Drive through to the container using the Extra Paramaters setting? After following any instructions I can provide I have come up empty.
  18. Yes, my settings appear the same. Bonding set to No, Bridging to Yes, and eth0 as bridging member.
  19. Hey Community! So I am hoping to set up pihole on unraid using the docker image. I am running unRAID 6.7.2 and have a Plus license. I just noticed that I am unable to select custom for my network type in a docker template and assign a static IP. The only options I get are Host, Bridge, None. I have no idea why I am missing custom and the ability to set a static IP. Is it because I have an onboard NIC and not a separate card? I am at a loss.
  20. Thanks Binhex, this is definitely helpful info. I could not figure out why this was happening to most of my torrents. Could also explain my low upload ratio. The only issue I am still having is that when I reboot the Docker container, it re-enables Blocklist. It is a built in plugin to Deluge. What is the best way to remove it?
  21. @coppit Thanks for the follow up. It has been some time since I have messed with this with the holidays and work. I will try and get some more information for you in the coming days. I will first try to remove the container completely and reinstall. As you mentioned this may also be another problem. Thanks again!
  22. I had the functionality restored so I stopped looking into it but tonight the same issue with the Guacamole server happened. It appears to be an issue on Mac OS. I had no issues accessing Guacamole WebGUIs for Dockers in Win 10. When I have this issue on Mac OS it causes an issue with the proxy as well and doesn't allow any internet traffic through either. The performance through the proxy is problematic.
  23. After a reboot I am still having server issues. Anything that leverages XRDP for the GUI is unresponsive. The webUI opens but I am unable to click ok and proceed, or cancel, or access the drop down. Then after some time passes I get this error, any ideas?