Bedey

I'm stuck, I can't assign my old 1tb drive to the 3rd disk, if I install a new drive I think parity with that the other corrupted drive will result in a total loss of all data

tried with -L, seems kinda working, but inside the drive almost everything is missing and being replaced with "Lost+found" folder, guess i lost some data

Phase 1 - find and verify superblock... bad primary superblock - bad magic number !!! attempting to find secondary superblock... .found candidate secondary superblock... verified secondary superblock... would write modified primary superblock Primary superblock would have been modified. Cannot proceed further in no_modify mode. Exiting now. Result of disk 2 after i run a check with the command -n

Ok I'll check asap, I hope is not hardware related, both of that drives are connected at the motherboard

Ok, should be this one petere-diagnostics-20191119-1846.zip

this one? syslog.txt

This is my situation Disk 2 is the drive i repaced the first day the other one should be the disk i tried to upgrade So first of all thanks for your help, i can't understand what i have to do

Yes, pretty much every week My nas finally started up, but unfortunately it says I can't install a smaller replacement disk. So I'll write a summary Day one: replaced one disk, rebuild it and fixed file system, everything seems working fine Day three :upgraded one disk, turned on the system and the new disk give me this error "Unmountable: No file System" (I still didn't do a 2nd rebuild) and for no reason the disk I replaced the first day give me another error "Unmountable: Unsupported partition layout" and now after I put back the drive I replaced on the third day it says it's too small and can't be used So I'm screwed?

Old parity and rebuild are error free, right now I'm restarting my nas(it takes a lot of time, I never solved that issue), I want to see if with old drives the array can be started

Never precleared, the first time I just replaced a failed drive and waited for the rebuild, this time I just replaced a small disk but it can't be rebuilt because of the other drive/disk giving an error, right now I installed back the old small drive because it was working nicely

So, some days ago i replaced one failed disk with another similiar one, after the rebuild it give me this error "Unmountable: No file System", so after looking in this forum i ended with repairing the filesystem and all started to work as usual, but today i decided to upgrade another disk (still 3tb, like the parity one), and as the last time the new disk gave me the same error "Unmountable: No file System", but the real issue is that the other drive that i replaced some days ago give me another error "Unmountable: Unsupported partition layout" Is this correlated? can someone explain me what's happening? thanks

So the problems of instability are resolved? The Asus I own get updated like 4 days ago with the new agesa 1000a, so the last bios avaliable, I just want to upgrade without any sort of problems

So it's a good idea move my unraid sistem from g3900 to ryzen? I have already the motherboard, ram, ecc.. , I'm just waiting for the new apus

I update motherboard bios, but still take a lot, seems i can't do nothing else

Sorry aptalca, and thanks for your help, but I'm not so good with Linux or windows, I tried unistalling and installing it back many times,and after I installed the other JDownloader it worked

At the end i tried downloading the jdownloader2 by jlesage, it work fine , and i can copy and paste links, thanks for you help and have a good day

updated to the last version and restarted, same thing... black screen

I attached a 3tb hard drive, so it should have the firmware for >2TB support, I'll try to update the motherboard bios, sadly I have only a 16x slot

Did you updated the firmware or something else? Maybe I should change something in the bios, thanks for the reply

Good evening, i own an Adaptec 1430SA and after following some guides here in the forum i managed to start my array, but it takes like 30 minutes to boot. I can speed up times? it's normal ?

I used some time the jdownloader2 docker, but yesterday it stopped working. it gives me a black screen and the cursor, nothing else. Sorry for my english. Good evening.