I am also having issues with unRAID with the IPMI Settings Plugin. Running it does not seem to find any fans even though the sensor reading show three fan speeds (CPU_FAN1, REAR_FAN1, and FRNT_FAN1). Because of this I have under the Fan Settings in RED (fan is not configured) even though three fans are shown (as listed previously)
I have installed the latest IPMI Support plugin for unRaid 6.3.5 dated 2017.12.14.
My MB is an ASRock E3C226D21 with BIOS Version 3.30
The fan.cfg under /boot/config/plugins/ipmi# shows:
FANCONTROL="disable"
FANPOLL="6"
FANIP="192.168.1.184"
HDDPOLL="18"
HDDIGNORE="WDC_WD4002FFWX-68TZ4N0_K4KD7MTB,WDC_WD30EFRX-68EUZN0_WD-WCC4N0819750, WDC_WD30EFRX-68EUZN0_WD-WCC4N0805204,WDC_WD30EFRX-68EUZN0_WD-WCC4N0825205,WDC_WD 30EFRX-68EUZN0_WD-WCC4N0819308"
HARDDRIVES="enable"
FAN_CPU_FAN1="12"
TEMP_CPU_FAN1="99"
FAN_REAR_FAN1="13"
TEMP_REAR_FAN1="99"
FAN_FRNT_FAN1="14"
TEMP_FRNT_FAN1="99"
TEMPHI_CPU_FAN1="80"
TEMPLO_CPU_FAN1="20"
FANMAX_CPU_FAN1="64"
FANMIN_CPU_FAN1="1"
TEMPHI_REAR_FAN1="80"
TEMPLO_REAR_FAN1="20"
FANMAX_REAR_FAN1="64"
FANMIN_REAR_FAN1="1"
TEMPHI_FRNT_FAN1="80"
TEMPLO_FRNT_FAN1="20"
FANMAX_FRNT_FAN1="64"
FANMIN_FRNT_FAN1="1"
But when running the Configuration of the Plugin it does not find any IPMI Fan Locations. The fan.cfg file does not get changed when the IPMI Fan Config is run.
Checking IPMI fan Locations...Location 0-1: noneLocation 0-2: noneLocation 0-3: noneLocation 0-4: noneLocation 0-5: noneLocation 0-6: noneLocation 0-7: noneLocation 0-8: noneSaving board configuration...
Please tell me how to to configure my fans. I'm unable to locate the IPMITOOL as root in linux.
Thank you for all your hard work!