audiocycle

Wow thanks, not sure I would have figured this out. I had it installed and working initially and somewhere in the process I switched to location to /mnt/user/share to properly use the FUSE system and it stopped working but I never thought that could be it.

My latest install of the Postrgres 15 docker won't start. I have the following logs each time I try to start it even though it "installed successfuly" I had it working but nuked the previous image since I am just learning Postgres and had databases that Datagrip couldn't drop for some reason. Any help would be much appreciated!

I made sure it was all lowercase everywhere and have not had an issue with that part. Has anybody here had errors when trying to do multiple concurrent scans? I'm facing the same "database locked" error mentioned previously on the Github (#500, #880) after trying to use both of my drives at the same time. edit: Is there any way to make the container use the latest build (2.6.60) that was published yesterday?

I can confirm I had to enable privileged mode to get it to work as well. Thanks for setting up this docker image for unraid! I had looked into running a Ubuntu instance solely for ARM but I'm not familiar enough with Linux to make that a quick project.

I added those two variable to the template based on the Github and tweaked them following your comment but I'm still getting this same error. Tried both in the default network Bridge and with Br0 to no avail.

I just tried installing it and I just can't get it working. I also tried both the /config trick and changing the network¨settings to a dedicated IP and I keep getting

Ok, I'll try to update to 6.12 as soon as I have enough free time to address the permission issues that seem to come with that update. Thanks for your time

That was my first thought but in the Docker page it showed as stopped. To be sure I just tried running the backup again after first stopping binhex-qbittorrentvpn and got the same error message so I think something else is afoot.

Hi, My last auto-backup failed with this message at the end and now my manual attempts stall at that same "socket ignored" step. Any insight on what's wrong? Thanks [24.04.2023 05:02:08] Backing Up /usr/bin/tar: ./binhex-qbittorrentvpn/qBittorrent/config/ipc-socket: socket ignored /usr/bin/tar: .: file changed as we read it [24.04.2023 06:23:33] tar creation/extraction failed!

@SiteAssemble has a suggested "fix" which renames those labels using the Theme.Engine plugin. It won't change the fan names anywhere else but that was perfect for me: I actually found your post by looking for his, I needed to modify a name and had forgotten how 🤦‍♂️

Yeah, everything is updated with a working driver there. I'm gonna try a BIOS update since that seems to fix the error code 127 and code D3 for a lot of people. My only worry is that Asrock has no BIOS with AGESA 1.0.0.4 which they recommend for my 2700

I did pretty much that, I had it working through VNC previously just like my other VMs. Problems started trying to do more by adding a GPU. Not sure how I would control that VM if I didn't also passthrough the USB pcie card? As far as IOMMU groups go, I had to do a PCIe ACS override and now my GPU and it's sound card are in two groups but I don't believe that to be an issue. I also followed SpaceInvaderOne's recommended XML edit to put both on the same 'multifunction' slot. In any scenario I believe I have found the issue; In the VM logs the last line is: A google search of that brings me to a /r/unraid thread that explains that is caused by a buggy MB BIOS. That will be my new research lead for another night. I appreciate you taking the time to try and help! edit: I mean the screen that is plugged in the GPU that is assigned to the VM. VNC is disabled by unraid since there is a GPU but remote desktop works just fine.

I have a computer right next to it I tried cycling the VM a couple times, I can remote desktop into it but the screen stays blank and pressing on the wireless keyboard I have plugged in the a add-in card allocated to the VM doesn't change anything either. I also just tried booting the server with no output cable in the GPU, to see if that would help with unraid not taking it during boot. Also have unraid booting with no GUI just in case.

I've been trying to give my only GPU to my VM just like you were trying originally. My server can boot with no GPU at all, including no igpu, so I was hopeful to get it working like that but I'm not having any luck. When I assign the GPU to the VM it does what you described; The screen shows unraid stuff until I boot the VM and then it goes blank and is useless, forcing me to reboot the server. I guess I'll try a basic 1-slot GPU like you next although I was hoping to save my very last slot for another future project. 2700, X470 Master SLI/ac, GTX 1050 is the pertinent part of my setup

I'm at this point right now, trying to get my 1050 to show an image. Did you ever get yours working?

Damn that was it, thanks. After multiple installs I must have fat-fingered it. Thanks for your assistance, I appreciate you taking the time to lend your eyes!

Hi, I'm having issues reassigning the WebUI port to avoid the conflict with my Ubiquiti Console Docker. I read the ReadMe on GitHub as well as some posts on here and such have reassigned both the WebGui port as well as both sides of the port allocation in the Docker settings. I stil don't get anything when I connect the the set port. My docker install command results are below (vpn credentials edited) From what I can understand I have successfully edited -p '8088:8088/tcp' as well as -e 'WEBUI_PORT'='8088' The only detail where I might have gone wrong is to change the -p setting I had to delete "Host Path 3" in the image settings and create a new "Host Path 3" BTW I set privoxy to 9119 but that was the case before and didn't cause any issues previously.

Hi! Thanks for this plugin. I was tired of having random disconnect-reconnect warning messages from the integrated UPS utility with my USB connected CP1500AVRLCD. I'm surprised by two things that I see now that I have NUT configured though. First off, I can't seem to change the Master IP address? I stays stuck on the default 127.0.0.1 even though the field seems editable. The other detail, a bit more striking to me, is that it says my UPS is outputting at a unnecessarily high voltage? When I had it connected through a windows client I remember setting it at the strictest voltage control settings but right now it's receiving 118V from the wall and sending out 142V if NUT is to be believed. Is that information reliable? And if so, is it configurable through NUT? edit: I re-activated the integrated UPS utility and that one says my UPS is both receiving and outputting at 119V, which sounds more normal.

Hi, I am having a very similar issue with shfs bringing my 8 core CPU to a full 100% load. Have you managed to address your problem? I plan on starting a new thread with my own details but I'm surprised to see yours with no follow-up whatsoever.

Oh I hadn't seen that anywhere, thanks for the clarification. Do you have a luks-compatible windows utility to recommend by any chance? Veracrypt seems to be the most up to date I can find suggested but the last build now dates back 3 years.

@dlandon

I'm currently on UD v2020.04.27 and have been trying to mount a Bitlocker protected drive for the first time. I'm not capable of selecting a drive for the "encrypted disk" settings in either Firefox nor Edge at the moment. Could this be a bug with the drop down menu? I can't seem to mount the disk without the password beforehand either.

Thanks I'll go listen to that

@1812 pray tell because I haven't seen anything to that effect.