keldona

Thanks for the reply. It is a SAS to SATA breakout cable. They came with the card. I'll swap it with the other that came with the card. I'll try the molex to SATA adapter later today.

I recently installed Unraid 7 and also installed an "9211-8i 6G HBA LSI FW:P20 IT Mode" I bought off ebay from a seller with lots of good reviews. I've tried running it with a single new seagate drive and saw there has been resent issues with seagate drives and these types of cards in another post. So I shutdown and restarted with 3 known working drives (two western digital and one seagate) that were on sata and the new drive. None of the drives show up. I see this in my log and lspci.txt files from my diagnostics: Jan 19 15:45:34 Tower kernel: mpt2sas_cm0: LSISAS2008: FWVersion(20.00.07.00), ChipRevision(0x03) Jan 19 15:45:34 Tower kernel: mpt2sas_cm0: Protocol=(Initiator,Target), Capabilities=(TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ) 04:00.0 RAID bus controller [0104]: Broadcom / LSI SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] [1000:0072] (rev 03) Subsystem: Fujitsu Technology Solutions HBA Ctrl SAS 6G 0/1 [D2607] [1734:1177] Kernel driver in use: mpt3sas Kernel modules: mpt3sas attached are diagnostics. Any help would be appreciated. Could it possibly not be in IT mode? Thanks, tower-diagnostics-20250119-1549.zip

Thanks, Smart scan came up fine which is odd because removing the drive and trying to format it in a windows system using Mini tool partition software would report a successful format but wouldn't be accessible in windows. I replaced the hard drive and everything is fine now. Thanks for the help.

Here are my diagnostics tower-diagnostics-20221105-1754.zip

A power outage last night seems to have killed my cache drive. I've tried following this to repaire the btrfs. I'm on Unraid 6.9.0. I've gotten through the copying of the cache drive to a different drive but I'm unable to format the cache drive. I've tried removing it from cache and moving it but the drive will not format for me to move the files back after the format. I'm guessing the drive needs to be replaced but thought I would check here for more help before buying a replacement.