CSIG1001

This theory of getting parity to 0 is all wrong You don't know if the parity is wrong on the parity drive themselves VS what's on the array. If you keep getting parity errors and know your hardware is good, you can just rebuild your parity and hope that solves the issue.

what if your hardware is fine and you formated your parity disks and then did a parity check and got less than 50 sync errors? I guess go back and check hardware and ram? Also does rebooting do something with parity on the usb

ive decided just to reformat both parity disks and rewrite the parity information to the disks , obviously this is too complicated and poor implementation of unraid and should be addressed. Regardless I should not be too affected due to only having about 60 sync errors which were not able to fix themselves.

yeah i agree.

I am running into the same issue right now and have no clue how to figure this out. i changed out my ram, hba, and sas cables , 2 of them. I am using your settings blake 3 and building the checksum on 24 disks will take about 25 hours. Once you run the parity check and gather which sectors are bad , how do you check with DFI? The only thing I can do now is located the files and erase them or completely format the drive or replace. Everything checks out fine on smart and even scrutiny smart data, nothing is wrong with the hard drives. However crap unraid parity cant tell me anything and have run 2 parity checks and still getting roughly 5-50 errors with auto correction not working even though the box is checked on the main page. Very frustrating and received no help on discord

issue fixed by removing the - on EFI folder

I am doing a parity check and will be done in a few days. I plan on disabling the fast boot and leaving the folder name "EFI" with no - and will give you guys an update how it runs. I will not do anything else and let you know what happens. CSM is disabled as it is greyed out thanks

I was told to remove fast booting in the bios.. I will try this then what if this is still not working? I removed the - on EFI so no EFI- folder , just EFI Am i supposed to run "make bootable" again?

Please refer to this solved topic I am running into the same issue running a z370 mobo. Not sure what is going on but my bios is showing CSM disabled and everytime i reboot unraid , i have to manually go into my bios to manually select the boot device to force boot the USB drive where unraid resides. It will reboot the machine and work but gone are the days of rebooting my server and having it automatically boot into the OS. I did remove the dash on EFI folder so no more EFI- , Along the lines i basically forgot what I did to cause the USB not to automatically boot into unraid. What am i doing wrong? I have no other boot devices besides the USB unraid drive. I am affraid to click on Make USB bootable on the USB drive as i do not want to reformat the drive. How can I fix my USB drive to automatically boot from the USB so when I update unraid and reboot i, do not have manually force boot the USB drive in the bios? THanks

I am running into the same issue running a z370 mobo. Not sure what is going on but my bios is showing CSM disabled and everytime i reboot unraid , i have to manually go into my bios to manually select the boot device to force boot the USB drive where unraid resides. It will reboot the machine and work but gone are the days of rebooting my server and having it automatically boot into the OS. I did remove the dash on EFI folder so no more EFI- , Along the lines i basically forgot what I did to cause the USB not to automatically boot into unraid. What am i doing wrong? I have no other boot devices besides the USB unraid drive. I am affraid to click on Make USB bootable on the USB drive as i do not want to reformat the drive. How can I fix my USB drive to automatically boot from the USB so when I update unraid and reboot i, do not have manually force boot the USB drive in the bios? THanks

Starting Plex Media Server. Error: Unable to set up server: sqlite3_statement_backend::prepare: disk I/O error for SQL: PRAGMA cache_size=2000 (N4soci10soci_errorE) Stopping Plex Media Server. kill: usage: kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l [sigspec]

can you show me the make and m odel? link for these fans

anyone have a fan script?

Has anyone gotten this to work with unraid stable release? I wish this would work as qfan sucks in the bios as the fans are not ramping up for my norco 4224 case any suggestions? thanks

thanks , I was able to put in some better fans , however i think i should be sucking air from the outside into the case? I am currently blowing air out over the drives . How are you doing it?

That looks like a great alternative for using when you are rebuilding the parity. I looked on thingyverse but did not see it. Are you able to share it? How did you attach it ? Looks like you just screwed it on to the rack. My only issue would be how do you run power to it? Thanks

I used to use system auto fan which worked great on my old motherboard to control the hdd heat on my 24 bay norco 4224. Now with my asus z490 qfan it only sees the chipset or cpu which does not help ramp up the fans during a parity check and system auto fan app does not work to detect my chipset fan control. Not sure what else to do here as I am stumped on how to fix this issue where I can tell my backplane fans 3 , 120mm fans to ramp up when hdds exceed 45c . I usually avg around 45c at idle but during parity checks i see 51-54c on hdds . The entire 24 bay is filled up with large drives 12-18 TB I have 2 , noctua fans rununing in the rear any idea?

So running unraid /cache NVME raid 0 about 13000MB/s to a NVME on another client running 3000MB/s. Mellanox MCX311A-XCAT CX311A ConnectX-3 EN Network Card 10GbE SinglePort SFP+ I start out at 1.09GB/s but dies to about 50-100MB/s after 30 secs. Not sure if there is a setting in the switch MikroTik CRS305-1G-4S+IN that needs to be turned on to stop this issue? I am running windows 10 to unraid with issues. I heard linux is better i.e. Ubuntu? MTU size is not the issue and only screws things up with unraid and network shares over SMB. Increasing Jumbo frames in windows 10 did not do a thing Should I just return this CRAP or and buy a regular 10G network card and use adapters? What is the deal ??? Maybe the developer for Unraid can help me out. I am really pissed off

Is it possible to add network shares i.e. sharing a folder on another unraid server using samba or just being able to see the folder on another unraid server where the docker is not running? Or do I just need to have two chia dockers going at the same time ? Is this app controlled by the chia developers themselves where your wallet key is secure ? I assume you have to enter your wallet key in this app?

Thanks , i uninstalled this garbage , not worth my time , macs are crap now

Trying to do simple task Change player count from 10 to like 20?

So setup macinabox took me like 2 hours to figure out when selecting catilina to download in macinabox would really download big sur.. When I selected big sur it would download Catilina and install it.. Not sure what is going on here maybe someone could tell me what i am doing wrong or is the docker messed up?

Hello AUTO FAN 1.6 why you not working with my new ASUS Z490 gaming -E ROG Strix mobo? I need this to work and to detect my PWM controller so I can set my fans up. I dont care to setup my fans in the bios Any developer looking at this please fix it! Thanks!

yep i figured it out. Now my dam auto fan plugin is not working , and due to my case and temps where my hdds are at I need this to work . Running a z490 mobo asus gaming -E ROG strix. Come on unraid such a PIA