ledfortr

Members
  • Posts

    53
  • Joined

  • Last visited

Everything posted by ledfortr

  1. After a bit of time, I am happy to report that I unraid has not crashed once. Fixing that drive was the key. It is much snappier now as well. I appreciate everyone's help. I'll report back if anything else happens.
  2. Hi all - i have a strange issue with minecraft that's occurred. I setup 2 proxy hosts for 2 seperate minecraft server instances I have running (using crafty 4). It worked great for a couple of days and I am having a few issues now. When I access any of my previous working proxy hosts, it sends me to the same minecraft server instance regardless of the address. Krafty 4 appears to be working as I can connect to each individually on my internal network and using the external address with the port referenced. I tried to add a brand new proxy host and it still points to that same server as the previous ones I created. I did a couple dnsflushes in an attempt to troubleshoot. Are there other things I can do in order to troubleshoot? I'm at a loss. I should mention that when I tested the new proxy address, i setup a new cname on my domain registar.
  3. I'll install it tonight and migrate it prior to my little dudes getting home from school. They were not pleased with the downtime to replace the cache drive today. They made a bunch of plans with friends, so i'll have to establish a change window haha. Thanks for all the help! I've noticed the server being much snappier now that the problem drive is gone.
  4. Should I use the binhex craft 4 or the regular?
  5. If I use crafty 4, would I be able to migrate their existing world into it?
  6. Hi - it turns out my problems have been due to the drive going bad! I have a new drive in hand, just waiting for an app to get copied back to unraid that was backed up. I was able to restore the minecraft instance from my CA backup and my sons and their friends are happy! They spent weeks building whatever they built. I have another question - I made this server accessible via WAN and setup port forwarding rules on my router. They asked if I could create another server for them in survival mode. Is there a way to do this with this docker? Do I need to run another instance of it and have my sons friends connect in from an alternate port? Thanks!
  7. Excellent! I am replacing the drive now. Thank you! I'll report back if this fixes it after a couple of weeks. I think it will.
  8. Rutherford - Thanks for the response. That's a ton of good information. I had a full backup with CA a couple of days ago, I'm un-tarring it now and i'll restore unifi and minecraft and see where that gets me. I think you are right about the drives, I know my SSD is a cheapo vaseky I bought and probably should never have been put into service. If I change the Appdata share over to Yes-cache vs. only cache, would that have recovered the appdata files? To your point about diagnostic data, I created a thread in the general support forum to try and figure out what's been happening. I think this minecraft issue/drive issue is related. Help Troubleshooting - 6.11.5 Poweredge R510 - General Support - Unraid
  9. Hi all, i'm running the latest docker and have had my kids using this server for about 3 weeks. I had them log on today and it appears to be a brand new world, they don't have admin privileges etc... The game is set to backup every 12 hours, plus I have a utility that backs up appdata. Is there a way to recover their world? I think my cache drive is failing. I had to reboot unraid because there was a share I couldn't access (this happens a lot) and I noticed that the array wouldn't start and that one of my cached drives needed to be added into the pool. I added the drive and it forced me to format it. My appdata is set to cache only, it looks like my cache pool got cleared out. I have other apps that didn't reset, like PMS/radarr/sab... however, Unifi controller did get reset. What a pain. Right now I am restoring unifi and minecraft from my CA appdata backups and hoping that clears the way.
  10. I pulled it from the flash. Thanks for the help!syslog Full
  11. I'm not sure how to do that, I'll look it up. The one I attached was just from the http://unraid/logs/syslog link. I'll figure it out and reattach. Thanks!
  12. syslog Uploaded syslog file attached. When it rebooted this morning, the file system didn't mount and the cache pool had to be reenabled by selecting one of the drives. I also had to format it. I'm wondering if one of the two disks in the cache pool are giving me issues. Usually when I problem arises, I know about it from my access to shared drives from unraid. In this case, I wasn't able to download anything. I logged on to unraid and was going to do use the fix permissions tool as this has happened before and a reboot brought eveyrthing back. Let me know if anyone can gain insight on my problem. Thanks!
  13. I have enabled the syslog server and i'll post it after the next crash.
  14. galactus-diagnostics-20230124-1449.zipHey all - I am having some trouble with my unraid server and I need some help troubleshooting. I'm not sure where to start, given how it is behaving. Every few weeks, the SMB mappings just stop, that usually alerts me to the server being inaccessible. I usually have to run down and reboot it. Sometimes the interface is accessible, most the time it is not. In all cases, a reboot has been able to fix it. I had some issues with the cache drive being full, i fixed that a few month ago, but the problem persists. I don't see anything meaningful in the log of unraid, I don't see any failures in the DRAC. Are there some diagnostics that I can start with in order to try and get this corrected? It may be hardware related and just plain ready to die. Thanks all!galactus-diagnostics-20230124-1449.zip
  15. The mover finally finished last night and it appears to be successful. It looks like some of my dockers aren't functioning (unifi), so I have some troubleshooting to do. I'll keep updating this thread. I think I may have to restore from backup to fix all my dockers.
  16. I see why it didn't attach, I ran the diag and copied it into the thread, however, it didn't upload because the diag is apparently empty. 0 kb Probably because of the disk full problem. Is there a way to run the diag command from the CLI? Then I click the download, I actually see the script running and data being looked at.
  17. Shares were set to cache=yes when I attempted the mover earlier. I can swap them back and try again. I would expect the same result.
  18. Hi - I'm having some challenges with my cache drive. I noticed the other day that it's full (250gb). I ran the mover and nothing came off the drive. I set all my shares that were cache only to prefer cache to allow for the main array to be used until I figured out what was going on. That didn't make a difference. I had an extra drive laying around, so I added it to the cache pool and now its 750gb. I ran a parity check and the mover again and nothing happened. I checked again this morning and the entire cache drive is full again. Is there a command that I can run to see what is taking up the space? I'm not great on linux, so I'm not sure how to do this. See attached diag.
  19. Hey all - I am having some issues setting up the initial Grafana data source. I followed this guide How to setup Grafana, InfluxDB and Telegraf to monitor your unRAID system. | Technical Ramblings With this post arguments in telegraf - (which is the one for telegraf:alpine repository) /bin/sh -c 'apk update && apk add smartmontools && apk add lm-sensors lm-sensors-detect perl && apk add nvme-cli && apk add ipmitool && telegraf' Everything went along fine until i got to he part where I was adding the data source in grafana. All dockers are up and running, however, when I try to attach, I get the error below. I think it's authentication related. I used the password in the telegraf.conf file (metrics......). I also tried it with the default info as well as the info in the guide (which I am aware is not complete). Can anyone give me a little help? The frustrating part is, I got this working last year and it was cool. Now, I am looking to use it with my energy monitoring system and its not working : / Thanks all
  20. Hey All - somehow this morning, my Sonarr is prompting for a username and password. The problem is, I have never established one. Is there some way that I can open that back up without starting from scratch?
  21. I was able to get everything operational from the backup. There were a few appdata files that had the wrong permissions for some reason. I assume it was the result of a partial balance. I archived the appdata and rebuilt the directory from the backup. Once the backup was complete, I pushed the right permissions through all the files. Once everything looked good there, I added my docker containers back in from templates. All is good!
  22. The drive I was using to balance actually failed. I removed it from the pool and went back to just a single cache drive. I'm struggling to restore everything back with CA backup. I have the tar file from the backup, however, the restore appdata tab on CA backup doesn't show a backup set in the directory where the tar file exists. I posted in the ca backup support forum to try to get some help. Is there an easy way just to wipe everything and start over on unraid without wiping all my media on the disks? Every time I've reinstalled plex, it still won't come up after i configure it.
  23. I did that initially. I'm doing something wrong. Anything else I can check?