NyHoK

In a strange change of heart Nvidia has released as part of their 465.89 driver, official VM support when their GPU is passed through towards a VM. Currently in BETA more detail in the help link below: https://nvidia.custhelp.com/app/answers/detail/a_id/5173/~/geforce-gpu-passthrough-for-windows-virtual-machine-%28beta%29 I haven't been able to test at the moment as I use proxmox to do all my VM heavylifting but may switch back to Unraid if this works properly

It is set to yes.

I always run the gui with tracking enabled/ad block off and it's still not not showing shares. I've even tried another brower to confirm and the gui just looks like this:

Hiya, I appear to have a problem with the webgui not showing my shares however the folders on the drives are still intact and accessable via SMB and SSH. If I add a share using the gui the gui responds that the share added was deleted but still creates the folder on the array. I've done a few reboots with and without docker running and it has not fixed the problem. Running a parity check just in case but I doubt that will change anything. I've attached my diagnostics. Thanks in advance for the help. (Note: I'm aware of the temperature alerts on the drives. I recently made the poor choice of upgrading this rig to use the Silverstone CS381 case and the hotswap bays have terrible ventilation. I'll be swapping out the case later) caroline-diagnostics-20200701-0948.zip

Changed Status to Solved

Managed a ~130MB/s average on the last parity check, it's looks like it was like @johnnie.black said and something was running in the last two checks . Closing as a non-issue, feel free to reopen if it is an issue.

Are you running a headless system? If so are, running in UEFI or Legacy mode? (Found in Shares > Flash > Legacy Mode) If in UEFI mode try running in legacy mode and with a graphics rom, this fixed my problem with my 1050-Ti when I was getting Code 43s

Hi All! I'm having VM issues with my unRAID system and I'm looking for any help if available. The problem is as follows: Start Windows VM Shutdown VM Try to start VM again Entire unRAID system becomes unresponsive I've been trying to troubleshoot this for quite a while now from C-States to making sure that the AMD GPU resets properly and nothing seems to work. I've attached my latest diagnostics from post the last system crash, XML for the VM and system specs below. Thanks in advance for the help NyHoK System Specs: AMD Threadripper 1950x Asrock Taichi x399 MB 16GB G.Skill Flare X 3200MHz RAM 1x Rx560 GPU (Passthrough for the VM) 1x Rx550 (Spare GPU for future use - currently boot GPU) 1x ASUS Xonar DX Sound Card (Passthrough for VM) 1x elGato HD60 Pro (Passthrough for VM but not used as it also causes system crashes on VM start) VM XML: <domain type='kvm'> <name>Amnis</name> <uuid>c71d8b2a-c8ad-f924-8f1d-c8ecb182fd3b</uuid> <description>Streaming PC (10c20t - RX560)</description> <metadata> <vmtemplate xmlns="unraid" name="Windows 10" icon="windows.png" os="windows10"/> </metadata> <memory unit='KiB'>6291456</memory> <currentMemory unit='KiB'>6291456</currentMemory> <memoryBacking> <nosharepages/> </memoryBacking> <vcpu placement='static'>20</vcpu> <cputune> <vcpupin vcpu='0' cpuset='6'/> <vcpupin vcpu='1' cpuset='22'/> <vcpupin vcpu='2' cpuset='7'/> <vcpupin vcpu='3' cpuset='23'/> <vcpupin vcpu='4' cpuset='8'/> <vcpupin vcpu='5' cpuset='24'/> <vcpupin vcpu='6' cpuset='9'/> <vcpupin vcpu='7' cpuset='25'/> <vcpupin vcpu='8' cpuset='10'/> <vcpupin vcpu='9' cpuset='26'/> <vcpupin vcpu='10' cpuset='11'/> <vcpupin vcpu='11' cpuset='27'/> <vcpupin vcpu='12' cpuset='12'/> <vcpupin vcpu='13' cpuset='28'/> <vcpupin vcpu='14' cpuset='13'/> <vcpupin vcpu='15' cpuset='29'/> <vcpupin vcpu='16' cpuset='14'/> <vcpupin vcpu='17' cpuset='30'/> <vcpupin vcpu='18' cpuset='15'/> <vcpupin vcpu='19' cpuset='31'/> <emulatorpin cpuset='5,21'/> </cputune> <os> <type arch='x86_64' machine='pc-q35-2.11'>hvm</type> <loader readonly='yes' type='pflash'>/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd</loader> <nvram>/etc/libvirt/qemu/nvram/c71d8b2a-c8ad-f924-8f1d-c8ecb182fd3b_VARS-pure-efi.fd</nvram> </os> <features> <acpi/> <apic/> </features> <cpu mode='host-passthrough' check='none'> <topology sockets='1' cores='20' threads='1'/> </cpu> <clock offset='localtime'> <timer name='rtc' tickpolicy='catchup'/> <timer name='pit' tickpolicy='delay'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/local/sbin/qemu</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='none'/> <source file='/mnt/user/vms/Amnis/vdisk1.img'/> <target dev='hdc' bus='virtio'/> <boot order='1'/> <address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x0'/> </disk> <controller type='usb' index='0' model='nec-xhci'> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/> </controller> <controller type='sata' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/> </controller> <controller type='pci' index='0' model='pcie-root'/> <controller type='pci' index='1' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='1' port='0x8'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0' multifunction='on'/> </controller> <controller type='pci' index='2' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='2' port='0x9'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <controller type='pci' index='3' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='3' port='0xa'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/> </controller> <controller type='pci' index='4' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='4' port='0xb'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x3'/> </controller> <controller type='pci' index='5' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='5' port='0xc'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x4'/> </controller> <controller type='pci' index='6' model='dmi-to-pci-bridge'> <model name='i82801b11-bridge'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x1e' function='0x0'/> </controller> <controller type='pci' index='7' model='pci-bridge'> <model name='pci-bridge'/> <target chassisNr='7'/> <address type='pci' domain='0x0000' bus='0x06' slot='0x00' function='0x0'/> </controller> <controller type='pci' index='8' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='8' port='0xd'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x5'/> </controller> <controller type='pci' index='9' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='9' port='0xe'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x6'/> </controller> <controller type='virtio-serial' index='0'> <address type='pci' domain='0x0000' bus='0x02' slot='0x00' function='0x0'/> </controller> <interface type='bridge'> <mac address='52:54:00:e1:e8:80'/> <source bridge='br1'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/> </interface> <serial type='pty'> <target type='isa-serial' port='0'> <model name='isa-serial'/> </target> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <channel type='unix'> <target type='virtio' name='org.qemu.guest_agent.0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <input type='mouse' bus='ps2'/> <input type='keyboard' bus='ps2'/> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x09' slot='0x00' function='0x0'/> </source> <address type='pci' domain='0x0000' bus='0x04' slot='0x00' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x09' slot='0x00' function='0x1'/> </source> <address type='pci' domain='0x0000' bus='0x05' slot='0x00' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x42' slot='0x04' function='0x0'/> </source> <address type='pci' domain='0x0000' bus='0x07' slot='0x01' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='usb' managed='no'> <source> <vendor id='0x046d'/> <product id='0xc539'/> </source> <address type='usb' bus='0' port='1'/> </hostdev> <hostdev mode='subsystem' type='usb' managed='no'> <source> <vendor id='0x2516'/> <product id='0x0011'/> </source> <address type='usb' bus='0' port='2'/> </hostdev> <hostdev mode='subsystem' type='usb' managed='no'> <source> <vendor id='0x8087'/> <product id='0x0aa7'/> </source> <address type='usb' bus='0' port='3'/> </hostdev> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x08' slot='0x00' function='0x0'/> </memballoon> </devices> </domain> servo-diagnostics-20180325-1231.zip

Turns out my docker couldn't communicate out to the internet. I reset the network settings under the docker LAN settings and that fixed it.

I seem to get the following problem when trying to create the letsencrypt docker. Am I missing something? Unraid Docker log: [cont-init.d] 10-adduser: exited 0. [cont-init.d] 20-config: executing... [cont-init.d] 20-config: exited 0. [cont-init.d] 30-keygen: executing... using keys found in /config/keys [cont-init.d] 30-keygen: exited 0. [cont-init.d] 50-config: executing... Backwards compatibility check. . . 2048 bit DH parameters present SUBDOMAINS entered, processing Only subdomains, no URL in cert Sub-domains processed are: -d ******** E-mail address entered: ******** Generating new certificate Saving debug log to /var/log/letsencrypt/letsencrypt.log Plugins selected: Authenticator standalone, Installer None An unexpected error occurred: ValueError: Requesting acme-v01.api.letsencrypt.org/directory: Host is unreachable Please see the logfiles in /var/log/letsencrypt for more details. ERROR: Cert does not exist! Please see the validation error above. The issue may be due to incorrect dns or port forwarding settings. Please fix your settings and recreate the container var/log/letsencrypt/letsencrypt.log: root@c919d7ca660d:/$ cat /var/log/letsencrypt/letsencrypt.log 2018-02-14 10:06:53,961:DEBUG:certbot.main:certbot version: 0.21.1 2018-02-14 10:06:53,961:DEBUG:certbot.main:Arguments: ['--renew-by-default', '--non-interactive', '--standalone', '--preferred-challenges', 'http', '--rsa-key-size', '4096', '-m', '******', '--no-eff-email', '--agree-tos', '-d', '******'] 2018-02-14 10:06:53,961:DEBUG:certbot.main:Discovered plugins: PluginsRegistry(PluginEntryPoint#certbot-route53:auth,PluginEntryPoint#dns-cloudflare,PluginEntryPoint#dns-cloudxns,PluginEntryPoint#dns-digitalocean,PluginEntryPoint#dns-dnsimple,PluginEntryPoint#dns-dnsmadeeasy,PluginEntryPoint#dns-google,PluginEntryPoint#dns-luadns,PluginEntryPoint#dns-nsone,PluginEntryPoint#dns-rfc2136,PluginEntryPoint#dns-route53,PluginEntryPoint#manual,PluginEntryPoint#null,PluginEntryPoint#standalone,PluginEntryPoint#webroot) 2018-02-14 10:06:53,976:DEBUG:certbot.log:Root logging level set at 20 2018-02-14 10:06:53,977:INFO:certbot.log:Saving debug log to /var/log/letsencrypt/letsencrypt.log 2018-02-14 10:06:53,977:DEBUG:certbot.plugins.selection:Requested authenticator standalone and installer None 2018-02-14 10:06:54,053:DEBUG:certbot.plugins.selection:Single candidate plugin: * standalone Description: Spin up a temporary webserver Interfaces: IAuthenticator, IPlugin Entry point: standalone = certbot.plugins.standalone:Authenticator Initialized: <certbot.plugins.standalone.Authenticator object at 0x1550cfbb8310> Prep: True 2018-02-14 10:06:54,054:DEBUG:certbot.plugins.selection:Selected authenticator <certbot.plugins.standalone.Authenticator object at 0x1550cfbb8310> and installer None 2018-02-14 10:06:54,054:INFO:certbot.plugins.selection:Plugins selected: Authenticator standalone, Installer None 2018-02-14 10:06:55,343:DEBUG:acme.client:Sending GET request to https://acme-v01.api.letsencrypt.org/directory. 2018-02-14 10:06:55,346:DEBUG:urllib3.connectionpool:Starting new HTTPS connection (1): acme-v01.api.letsencrypt.org 2018-02-14 10:06:58,465:DEBUG:certbot.log:Exiting abnormally: Traceback (most recent call last): File "/usr/bin/certbot", line 11, in <module> sys.exit(main()) File "/usr/lib/python2.7/site-packages/certbot/main.py", line 1240, in main return config.func(config, plugins) File "/usr/lib/python2.7/site-packages/certbot/main.py", line 1104, in certonly le_client = _init_le_client(config, auth, installer) File "/usr/lib/python2.7/site-packages/certbot/main.py", line 632, in _init_le_client acc, acme = _determine_account(config) File "/usr/lib/python2.7/site-packages/certbot/main.py", line 511, in _determine_account config, account_storage, tos_cb=_tos_cb) File "/usr/lib/python2.7/site-packages/certbot/client.py", line 163, in register acme = acme_from_config_key(config, key) File "/usr/lib/python2.7/site-packages/certbot/client.py", line 45, in acme_from_config_key return acme_client.Client(config.server, key=key, net=net) File "/usr/lib/python2.7/site-packages/acme/client.py", line 72, in __init__ self.net.get(directory).json()) File "/usr/lib/python2.7/site-packages/acme/client.py", line 681, in get self._send_request('GET', url, **kwargs), content_type=content_type) File "/usr/lib/python2.7/site-packages/acme/client.py", line 653, in _send_request raise ValueError("Requesting {0}{1}:{2}".format(host, path, err_msg)) ValueError: Requesting acme-v01.api.letsencrypt.org/directory: Host is unreachable 2018-02-14 10:06:58,465:ERROR:certbot.log:An unexpected error occurred: