jpotrz

Members
  • Posts

    105
  • Joined

  • Last visited

Everything posted by jpotrz

  1. Excellent plugin. I have it up and running but was hoping there was a way to have it running as an SFTP? I'm not entirely well versed in the process, and I admit I haven't read this entire thread (it dates back 6 years!?!?) Any help on getting it to run SFTP and/or at least on how to change the port, would be appreciated. Thanks
  2. Excellent. Got it. If I recall, there was a way now to set different drive orientation in the layout? like 8 vertical, 3 horizontal?
  3. I just updated to the latest unRaid, and in turn, had to reinstall Disk Location. It seemed to work ok, but I apparently only have the "Devices" and "Information" tabs and can not configure anything. On the top of the Information tab, I have an error: Warning: A non-numeric value encountered in /usr/local/emhttp/plugins/disklocation/pages/info.php on line 107 Thoughts? Suggestions?
  4. How did you get vertical and horizontal bays to display like that?
  5. Ohhh!!! Added to the dashboard now. I like it! However, it seems to be out of place and is waaaaaaaaaaaaaaaay at the bottom of the left column with a lot of space between it and the "Air Flow" section above it.
  6. Ugh sorry about the reboot/diags. Well I have a rebuild going right now. Interestingly, this is a new controller card and cables (less than a week old) and this is my first disk problem as well. Disk is only ~months old. So if the rebuild gives problems, I will try connecting that port directly to the MB instead of the controller card and see what happens.
  7. Diagnostics attached. Woke up yesterday with a disconnected drive and contents emulated. Stopped array Powered down Physically removed disk5 Powered up Started Array Powered down Physically readded disk5 Powered up Readded disk5 to array currently rebuilding (11hrs) thoughts? Ideas? Prayers? shelbyville-diagnostics-20190621-1033.zip
  8. Yeap figured this out after I posted. Thanks for the reply though!
  9. it seems that when clicking on the drop-down WebUI option it is trying to launch the site as HTTP. However that doesn't work. HTTPS does work though, is there a way to change that?
  10. I fixed my problem posted above, but now I seem to be having the same problem/confusion that lots of others are in regards to paths for Bazarr and Sonarr/Radarr. No matter what I put in those path, it shows up as /media/ and "This path does not seem to be valid" It sees all my TV shows and Movies and lists them just fine. But still shows that error. If I try to manually force download the subtitles I get the attached error message in my log Any help would be appreciated.
  11. Just installed today, set my paths etc properly (what I think is proper anyways). Fired up the container and the webgui will not connect. Checking logs, it says it's running: [cont-init.d] 10-adduser: exited 0. [cont-init.d] 30-config: executing... [cont-init.d] 30-config: exited 0. [cont-init.d] done. [services.d] starting services [services.d] done. Bazarr starting... 2019-04-08 15:56:04,583 - root (14d3e2fa4b68) : INFO (main:1937) - BAZARR is started and waiting for request on http://192.168.1.200:6767/ Traceback (most recent call last): File "/app/bazarr/bazarr/main.py", line 1938, in <module> server.serve_forever() File "/usr/lib/python2.7/site-packages/gevent/baseserver.py", line 362, in serve_forever self.start() File "/usr/lib/python2.7/site-packages/gevent/baseserver.py", line 306, in start self.init_socket() File "/usr/lib/python2.7/site-packages/gevent/pywsgi.py", line 1486, in init_socket StreamServer.init_socket(self) File "/usr/lib/python2.7/site-packages/gevent/server.py", line 146, in init_socket self.socket = self.get_listener(self.address, self.backlog, self.family) File "/usr/lib/python2.7/site-packages/gevent/server.py", line 157, in get_listener return _tcp_listener(address, backlog=backlog, reuse_addr=cls.reuse_addr, family=family) File "/usr/lib/python2.7/site-packages/gevent/server.py", line 256, in _tcp_listener Not sure what I'm missing. Removed docker and retried again and same thing. Any help would be appreciated. Thanks!
  12. Potentially dumb question - I just queued up a fairly large move that will take ~24hrs. I can close the browser window right? It will continue with the browser closed and the Windows PC turned off?
  13. Makes sense all around. Thanks for the quick and detailed response!
  14. 2 quick questions... I have an unassigned device that is a USB attached drive. Any way to get that to show up? Also, is it possible to show the unRaid assigned 3 digit code (don't know that that is technically called) in the configuration tab? I can more easily identify the drives that way. ... and a wish item. Ability to change orientation of each drive individually. I have 6 vertical bays and 4 horizontal in my case. Would be great to allow them to be displayed properly. Thanks! Great plugin!!
  15. I actually can't adjust the speed of my fans too much in my case (supermicro server case) In fact I've ended up pulling the main chassis fan all together as it runs at 100% rpm regardless of bios settings. Got too noisy and CPU temps don't get too high without it.
  16. So what you're saying is I need to put a heater on my HDDs?
  17. Is 19C bad? My HDDs rarely get above 21C even while under full load. Under low usage, they sit at 19C. Server is in the basement and, in these winter months, probably sits around 15C or so ambient temp.
  18. I'm pretty sure when you're in the main tab, with the UD unmounted, you can click on it and rename. I know I've given mine "friendly names"
  19. Just wanted to chime in again and say that I now have my SMB share(s) mounted and recognized perfectly. Updated some scripts to recognize them and all seems to be working properly. Thanks for an absolute KILLER plugin for unRaid. This increases it's value a to me a TON. My only request (and this is a completely OCD type thing) is that in the main tab gui, if all the used/free space bars could line up with those in the actual unRaid pool, it would look so much cleaner and less "confusing". Obviously a SUPER minor item but figured I'd throw it out there. Once again, thanks for a great plugin AND for all the help!
  20. Well, I turned off password sharing on the PC in question and it worked... sorta. After entering username/password I can see the shares on the PC in question and it will add them as an unassigned device, but I can not mount it. Edit: never mind. I turned off forcing SMB1 and it seems to be working now. We have a winner! THANK YOU for all the help and hand holding. unRaid has an incredible community!
  21. "bug" was a bad choice of words. Regardless, I will try it when I get home and we'll see it works.
  22. I think it's a combo of these two items. I tried another Windows machine on my network (coincidentally a Win10 VM running on my unRaid machine). Made sure password protected sharing was off (along with a few other settings in "Advanced Sharing Settings"), entered by Microsoft Username and Password and viola! There are the shares on my Win10 VM. I can't change the settings on the original Win10 machine right now (working remotely) but I'm guessing that it's a combination of both these problems. I will have to check when I get home. I will report back with my findings. Well at least I know it wasn't ENTIRELY my fault - there appears to be a bug/confusion in UD itself.
  23. Both are in "Workgroup" I browse my unRaid shares all the time via Homer (the Win10 machine I'm trying to get this SMB share working with)
  24. root@Shelbyville:~# /usr/bin/smbclient -g -L 192.168.1.64 -U% 2>/dev/null session setup failed: NT_STATUS_ACCESS_DENIED
  25. Hmmm I do log into all these machines with my Microsoft Account though. Don't see how that should matter too much though as I'd think the shares should still populate the drop down though - just wouldn't be able to access them if it was a login/pass problem?