physikal

Members
  • Posts

    62
  • Joined

  • Last visited

Everything posted by physikal

  1. No it's 179/bgp - which is odd.
  2. yeah I 100% agree it's not a long term solution. Just to buy me some time while I investigate and rebuild some VM's that could be compromised.
  3. I thought so as well. What's odd is the 50.106.16.89 address was an old address I had from my ISP, and when I checked my fw I saw 1 active session on port 6895 to an Amazon IP (Assuming AWS).
  4. yes I do have a QNAP device actually. I'll check that out I guess. I've turned on geoblocking on my fw for the time being.
  5. I'm seeing this in my system logs: Jan 14 00:23:31 Tower nginx: 2019/01/14 00:23:31 [error] 4984#4984: *1158237 user "admin" was not found in "/etc/nginx/htpasswd", client: 188.243.58.117, server: , request: "GET /Main HTTP/1.1", host: "50.106.16.89", referrer: "http://50.106.16.89/" Jan 14 00:23:31 Tower nginx: 2019/01/14 00:23:31 [error] 4984#4984: *1158237 user "admin" was not found in "/etc/nginx/htpasswd", client: 188.243.58.117, server: , request: "GET /Main HTTP/1.1", host: "50.106.16.89", referrer: "http://50.106.16.89/" Jan 14 00:23:33 Tower nginx: 2019/01/14 00:23:33 [error] 4984#4984: *1158248 user "admin" was not found in "/etc/nginx/htpasswd", client: 188.243.58.117, server: , request: "GET /Main HTTP/1.1", host: "50.106.16.89", referrer: "http://50.106.16.89/" Jan 14 00:23:33 Tower nginx: 2019/01/14 00:23:33 [error] 4984#4984: *1158248 user "admin" was not found in "/etc/nginx/htpasswd", client: 188.243.58.117, server: , request: "GET /Main HTTP/1.1", host: "50.106.16.89", referrer: "http://50.106.16.89/" Jan 14 00:23:34 Tower nginx: 2019/01/14 00:23:34 [error] 4984#4984: *1158255 user "admin" was not found in "/etc/nginx/htpasswd", client: 188.243.58.117, server: , request: "GET /Main HTTP/1.1", host: "50.106.16.89", referrer: "http://50.106.16.89/" Jan 14 00:23:35 Tower nginx: 2019/01/14 00:23:35 [error] 4984#4984: *1158255 user "admin" was not found in "/etc/nginx/htpasswd", client: 188.243.58.117, server: , request: "GET /Main HTTP/1.1", host: "50.106.16.89", referrer: "http://50.106.16.89/" Jan 14 00:23:35 Tower nginx: 2019/01/14 00:23:35 [error] 4984#4984: *1158261 user "admin" was not found in "/etc/nginx/htpasswd", client: 188.243.58.117, server: , request: "GET /Main HTTP/1.1", host: "50.106.16.89", referrer: "http://50.106.16.89/" Jan 14 00:23:37 Tower nginx: 2019/01/14 00:23:37 [error] 4984#4984: *1158261 user "admin" was not found in "/etc/nginx/htpasswd", client: 188.243.58.117, server: , request: "GET /Main HTTP/1.1", host: "50.106.16.89", referrer: "http://50.106.16.89/" Jan 14 00:23:39 Tower nginx: 2019/01/14 00:23:39 [error] 4984#4984: *1158275 user "admin" was not found in "/etc/nginx/htpasswd", client: 188.243.58.117, server: , request: "GET /Main HTTP/1.1", host: "50.106.16.89", referrer: "http://50.106.16.89/" Jan 14 00:23:39 Tower nginx: 2019/01/14 00:23:39 [error] 4984#4984: *1158275 user "admin" was not found in "/etc/nginx/htpasswd", client: 188.243.58.117, server: , request: "GET /Main HTTP/1.1", host: "50.106.16.89", referrer: "http://50.106.16.89/" Jan 14 00:23:40 Tower nginx: 2019/01/14 00:23:40 [error] 4984#4984: *1158278 user "admin" was not found in "/etc/nginx/htpasswd", client: 188.243.58.117, server: , request: "GET /Main HTTP/1.1", host: "50.106.16.89", referrer: "http://50.106.16.89/" What's interesting is I'm 99% sure my unRAID box is not externally accessible. So that concerns me. Any ideas on this?
  6. I was previously on 6.5 and I had no issues with my VM's when Parity check would kick off, now every time parity kicks off I get alerts from software that is running on the VM non-stop the entire time parity check is running (~20hrs). The thing that gets me is it shouldn't even be in the parity check since this VM is running directly from an unassigned drive. I wouldn't think parity check would impact that. Any thoughts? Thanks!
  7. I'm looking at DR scenarios and am curious if there is a guide out there on how to backup unraid as well as restore in the event of a flash drive (unraid OS) failure? Basically if my flash drive that unraid is installed on fails...I don't want to lose all my array config which I would imagine would cause a loss of data....how do I prevent this. Thanks!
  8. What's the process for migrating a VM from an Unassigned HDD to an Unassigned SSD? Is there a guide somewhere? Thanks!
  9. @Jcloud so is your repo going to have an update soon that fixes a lot of this and works w/ the main repo? Or are we supposed to remove yours and start over with the main repo again? I"m asking because something is definitely not right. My peers is still really low and I'm not getting additional data as frequent as I used to on the other repo. Thanks!
  10. Was there an update or something that isn't current on this docker? Seems like my peers are super low.
  11. FWIW I also noticed an issue using the CA Backup plugin the StorjMonitor docker doesn't start up on it's own properly. I didn't capture any error logs or anything - sorry I'm not more help lol.
  12. oh interesting, just checked and now only 1 is "connecting", the rest are connected. I'll just give it more time
  13. br0 w/ fixed IP. Worked fine for my other version (and the rest of the nodes). Just odd those 2 won't connect.
  14. Anyone else experiencing this? all but 2 nodes are connected and working fine. The other 2 are "connecting". Odd right?
  15. @Jcloud you're a badass...I forget if you sent me your ETH address or not. If not, please send. I need to donate.
  16. Is there an unRAID app/docker that handles pxe/network boot and install of different operating systems? I have a few computers in my house, and often help friends out with reformats. It would be AWESOME if I didn't have to track down my Win10 flash drive every time I wanted to install an OS. If I could just boot a machine on my network and install over pxe boot that would be slick. But every guide I've seen is fairly involved. Is there anything out there where I can just install the app, upload the ISO's, modify the menu a bit, tweak my DHCP server for the pxe boot settings and be off with it?
  17. I have a 24 bay Supermicro box running unRAID. I have 2x 6TB Parity drives, 6x 6TB and 8x 4TB drives....with 8 more bays available....are 2x 6TB parity drives really going to cover a failure?
  18. Anyone else have any issues with the cameras disconnecting daily? I don't have backups running or anything like that, that would shut down the docker. Seems like 2 o'clock on the dot is when it happens.
  19. @Jcloud Just realized you wrote up a node guide. I noticed you used mkdir as root on the host. Let me know if you have any problems with that. When I did that, every node directory I made had host perms that the docker didn't have permissions to, so when trying to run the storjshare load command via docker container it didn't have permissions to load the other nodes outside of the initial load the docker container made. So check out my step 1. Just an FYI for when you pimp this thing out
  20. Same, and I don't like wasting ports so I keep it slim. Thanks again!
  21. lol, I don't think of it like that. If I sent you ETH now, I HOPE it goes up for you. Sorry for your loss. Use l0rd's ports, he seems to know more about the ports than I do though my current setup is working fine.