Valerie

I'm going to face palm if that was the issue.

So my unraid server has started to constantly shutdown randomly. I have attached a couple days worth of syslogs. Please help me debug this isse. syslog

Is my disk dead or sata cable dead? ---- ----- smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.18.20-unRAID] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD30EFRX-68EUZN0 Serial Number: WD-WCC4N6KK70FE LU WWN Device Id: 5 0014ee 20dc13dc7 Firmware Version: 82.00A82 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Apr 29 22:05:58 2019 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: (40320) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 404) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x703d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 149 3 Spin_Up_Time POS--K 211 176 021 - 4416 4 Start_Stop_Count -O--CK 100 100 000 - 55 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 075 075 000 - 18722 10 Spin_Retry_Count -O--CK 100 253 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 54 192 Power-Off_Retract_Count -O--CK 200 200 000 - 38 193 Load_Cycle_Count -O--CK 188 188 000 - 37162 194 Temperature_Celsius -O---K 122 112 000 - 28 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 8 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 19 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x0c GPL R/O 2048 Pending Defects log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 9 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 9 [8] occurred at disk power-on lifetime: 18722 hours (780 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 08 00 00 57 95 4b d0 e0 00 Error: IDNF 8 sectors at LBA = 0x57954bd0 = 1469402064 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 00 08 00 00 57 95 4b d0 e0 08 00:07:53.832 WRITE DMA EXT b0 00 d0 00 01 00 00 00 c2 4f 00 00 08 00:07:22.818 SMART READ DATA ea 00 00 00 00 00 00 00 00 00 00 e0 08 00:07:22.755 FLUSH CACHE EXT ec 00 00 00 01 00 00 00 00 00 00 00 08 00:07:22.754 IDENTIFY DEVICE 35 00 00 00 08 00 00 ae c9 20 88 e0 08 00:07:22.749 WRITE DMA EXT Error 8 [7] occurred at disk power-on lifetime: 18722 hours (780 days + 2 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 05 40 00 00 01 7a a2 e0 e0 00 Error: IDNF 1344 sectors at LBA = 0x017aa2e0 = 24814304 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 05 40 00 00 01 7a a2 e0 e0 08 00:05:50.555 WRITE DMA EXT ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:05:50.555 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:05:50.555 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:05:50.555 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:05:50.555 SET FEATURES [Set transfer mode] Error 7 [6] occurred at disk power-on lifetime: 18722 hours (780 days + 2 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 05 40 00 00 01 7a a2 e0 e0 00 Error: IDNF 1344 sectors at LBA = 0x017aa2e0 = 24814304 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 05 40 00 00 01 7a a2 e0 e0 08 00:05:43.549 WRITE DMA EXT ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:05:43.548 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:05:43.548 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:05:43.548 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:05:43.548 SET FEATURES [Set transfer mode] Error 6 [5] occurred at disk power-on lifetime: 18722 hours (780 days + 2 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 05 40 00 00 01 7a a2 e0 e0 00 Error: IDNF 1344 sectors at LBA = 0x017aa2e0 = 24814304 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 05 40 00 00 01 7a a2 e0 e0 08 00:05:36.545 WRITE DMA EXT ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:05:36.545 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:05:36.545 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:05:36.544 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:05:36.544 SET FEATURES [Set transfer mode] Error 5 [4] occurred at disk power-on lifetime: 18722 hours (780 days + 2 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 05 40 00 00 01 7a a2 e0 e0 00 Error: IDNF 1344 sectors at LBA = 0x017aa2e0 = 24814304 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 05 40 00 00 01 7a a2 e0 e0 08 00:05:29.539 WRITE DMA EXT ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:05:29.539 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:05:29.539 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:05:29.538 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:05:29.538 SET FEATURES [Set transfer mode] Error 4 [3] occurred at disk power-on lifetime: 18722 hours (780 days + 2 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 05 40 00 00 01 7a a2 e0 e0 00 Error: IDNF 1344 sectors at LBA = 0x017aa2e0 = 24814304 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 05 40 00 00 01 7a a2 e0 e0 08 00:05:22.527 WRITE DMA EXT ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:05:22.527 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:05:22.527 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:05:22.526 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:05:22.526 SET FEATURES [Set transfer mode] Error 3 [2] occurred at disk power-on lifetime: 18722 hours (780 days + 2 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 05 40 00 00 01 7a a2 e0 e0 00 Error: IDNF 1344 sectors at LBA = 0x017aa2e0 = 24814304 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 05 40 00 00 01 7a a2 e0 e0 08 00:05:15.513 WRITE DMA EXT 35 00 00 05 40 00 00 01 7a 9d a0 e0 08 00:05:15.509 WRITE DMA EXT 35 00 00 05 40 00 00 01 7a 98 60 e0 08 00:05:15.493 WRITE DMA EXT 35 00 00 01 80 00 00 01 7a 96 e0 e0 08 00:05:15.448 WRITE DMA EXT 35 00 00 05 40 00 00 01 7a 91 a0 e0 08 00:05:15.444 WRITE DMA EXT Error 2 [1] occurred at disk power-on lifetime: 18128 hours (755 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 07 11 84 00 e7 00 Error: UNC at LBA = 0x07118400 = 118588416 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 00 00 00 07 11 83 b0 e7 08 9d+09:44:06.218 READ DMA c8 00 00 00 00 00 00 07 11 82 b0 e7 08 9d+09:44:06.217 READ DMA c8 00 00 00 00 00 00 07 11 81 b0 e7 08 9d+09:44:06.217 READ DMA c8 00 00 00 00 00 00 07 11 80 b0 e7 08 9d+09:44:06.216 READ DMA c8 00 00 00 00 00 00 07 11 7f b0 e7 08 9d+09:44:06.215 READ DMA SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 90% 18722 4550216 # 2 Short offline Interrupted (host reset) 10% 18722 - # 3 Short offline Completed without error 00% 17547 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 28 Celsius Power Cycle Min/Max Temperature: 28/28 Celsius Lifetime Min/Max Temperature: 2/38 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (227) Index Estimated Time Temperature Celsius 228 2019-04-29 14:08 30 *********** ... ..(169 skipped). .. *********** 398 2019-04-29 16:58 30 *********** 399 2019-04-29 16:59 31 ************ 400 2019-04-29 17:00 31 ************ 401 2019-04-29 17:01 30 *********** ... ..( 71 skipped). .. *********** 473 2019-04-29 18:13 30 *********** 474 2019-04-29 18:14 29 ********** ... ..( 78 skipped). .. ********** 75 2019-04-29 19:33 29 ********** 76 2019-04-29 19:34 ? - 77 2019-04-29 19:35 27 ******** ... ..( 4 skipped). .. ******** 82 2019-04-29 19:40 27 ******** 83 2019-04-29 19:41 ? - 84 2019-04-29 19:42 25 ****** 85 2019-04-29 19:43 25 ****** 86 2019-04-29 19:44 26 ******* 87 2019-04-29 19:45 26 ******* 88 2019-04-29 19:46 26 ******* 89 2019-04-29 19:47 27 ******** ... ..( 3 skipped). .. ******** 93 2019-04-29 19:51 27 ******** 94 2019-04-29 19:52 ? - 95 2019-04-29 19:53 28 ********* 96 2019-04-29 19:54 28 ********* 97 2019-04-29 19:55 ? - 98 2019-04-29 19:56 28 ********* ... ..( 22 skipped). .. ********* 121 2019-04-29 20:19 28 ********* 122 2019-04-29 20:20 30 *********** ... ..( 83 skipped). .. *********** 206 2019-04-29 21:44 30 *********** 207 2019-04-29 21:45 29 ********** ... ..( 6 skipped). .. ********** 214 2019-04-29 21:52 29 ********** 215 2019-04-29 21:53 30 *********** ... ..( 11 skipped). .. *********** 227 2019-04-29 22:05 30 *********** SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 2) == 0x01 0x008 4 54 --- Lifetime Power-On Resets 0x01 0x010 4 18722 --- Power-on Hours 0x01 0x018 6 6247826496 --- Logical Sectors Written 0x01 0x020 6 14926428 --- Number of Write Commands 0x01 0x028 6 128759046750 --- Logical Sectors Read 0x01 0x030 6 217708476 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 18452 --- Spindle Motor Power-on Hours 0x03 0x010 4 14756 --- Head Flying Hours 0x03 0x018 4 37201 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 394 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 9 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 524320 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 27 --- Current Temperature 0x05 0x010 1 27 --- Average Short Term Temperature 0x05 0x018 1 26 --- Average Long Term Temperature 0x05 0x020 1 37 --- Highest Temperature 0x05 0x028 1 18 --- Lowest Temperature 0x05 0x030 1 35 --- Highest Average Short Term Temperature 0x05 0x038 1 18 --- Lowest Average Short Term Temperature 0x05 0x040 1 31 --- Highest Average Long Term Temperature 0x05 0x048 1 21 --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 156 --- Number of Hardware Resets 0x06 0x010 4 875 --- Number of ASR Events 0x06 0x018 4 24 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) supported [please try: '-l defects'] SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 1664 Vendor specific

Deleting this. Noob mistake, but it was my ethernet cable. The ethernet cable maxed it out at Eth0: 10 MB/s. Once correcting it with a CAT 6a, I now have Eth0: 1000 MB/s.

First I would like to point out that I am super noob. I've gotten this far from this forum and spaceinvader videos. So I just got CenturyLink fiber, whoo! But now my sabnzbd download speed doesn't hit 1MB/s. I've done speedtests and receive 87 MB/s downloads. So I'm not sure what's wrong. Hardware List: Fiber connected straight into my USG Unraid 6 server wired into USG 120 SSD cache drive SOLVED: Wrong CAT ethernet cable

Good thing it's primeday today. Hopefully I can grab a disk for cheap

Hello, I'm looking to see if this is a warning to get a new drive or is there a way to fix it? SMART Report attached .txt file Thanks. WDC_WD40EZRX-00SPEB0_WD-WCC4E6EJ7F9T-20180716-0546.txt

Sorry for going MIA on my own post. Thanks for all the responses. What the correct temps for SSD?

Hi everyone, I'm very new to this and not sure what's going on. Whenever my server downloads a bunch of TV shows at once, I get temperature warnings. But I check my disk temp and it's not hot. What is going on? Anything I need to setup properly?