robsch

Hi Items --------- 2x Dell R720xd (https://www.amazon.com/PowerEdge-R720xd-2X-E5-2680v2-2-80GHz-Renewed/dp/B07V9X7F2P) 1x Dell Powervault 1220 (https://www.amazon.com/Dell-PowerVault-MD1220-Redundant-Refurbished/dp/B07MW8RH5Q/ref=sr_1_8?dchild=1&keywords=powervault+md1220&qid=1623957849&s=electronics&sr=1-8) So I have 6 500gb SSDs, and 44 4TB SAS drives. (For those keeping score) I currently have a 72TB unraid nas with 3.5" drives. (which is almost full). I want to migrate to the new hardware, The problem is you can't have more then 30 drives in an array. Is there away to get around this, that anyone has discovered? I have already flashed the controller to IT mode and it works fine, I just would like to use the rest of my drives. Since I have 2 of the R720xd's I could run two of them undependably, though I would prefer to cluster or sync them. I have 10gb cards in them and have UniFi 10gb switchs. This will be used for serving Media to my Theater Room / running a few dockers / and a few VMs. Thanks for any suggestions / thoughts. - Robert

.... SOB. Okay, Nevermind! Stupid User Error..... I completely missed that. Works like a charm! Thanks for the headsup!

I thought I would give this a run. It seems like it will be exactly what I am looking for. When I start the docker, after I configure it, It keeps scrolling : 2021-02-19 16:27:38.492612 [INFO] OpenVPN config file is found at /config/openvpn/AirVPN_US-Atlanta-Georgia_Libra_UDP-443.ovpn 2021-02-19 16:27:54.823516 [INFO] VPN_ENABLED defined as 'yes' 2021-02-19 16:27:54.846987 [INFO] VPN_TYPE defined as 'openvpn' 2021-02-19 16:27:54.875854 [INFO] OpenVPN config file is found at /config/openvpn/AirVPN_US-Atlanta-Georgia_Libra_UDP-443.ovpn 2021-02-19 16:28:23.535725 [INFO] VPN_ENABLED defined as 'yes' 2021-02-19 16:28:23.559352 [INFO] VPN_TYPE defined as 'openvpn' 2021-02-19 16:28:23.588611 [INFO] OpenVPN config file is found at /config/openvpn/AirVPN_US-Atlanta-Georgia_Libra_UDP-443.ovpn I have tried to get into the console, and it opens and closes the console window instantly. When I try to CLI into the console window, I get told to "Wait until the container is started" I have tried different config version for my openvpn config. I have tried with or without the keys and certs built in. Since I can't console in to check logs, I am a little perplexed as to what to poke at next. Any suggestions.

Sofar, so good! Its chewing though all her recorded TV, and I have them all in folders now! The OCD monster on my shoulder is shrinking away! Thank you VERY much! I really appreciate it.

Great! Thanks, I was away for work, and just got back last night. I will put it through its paces tonight!

That would work just fine! Thanks! My OCD kicks in, with my folder structures (That and my wife records a TRUCK LOAD of stuff... She has over 600 items recorded. (Don't ask)

I noticed it did not retain the folders, I looked for the comskip.ini file to edit,though I can't seem to find it. Is there away to set it so it will retain the structure? Thanks!

Hello, Maybe someone can give me an hand here, and let me know what I am doing wrong. I have kodi-headless installed via UnRaid Docker I have MYSQL running on a Virtual Machine (Proxmox) I know Kodi is talking to SQL as I have new DBs (MyMusic60) (MyVideos107), but when I load Kore and do a Video update, it doesn't do anything... (I havbe tried both smb:// and nfs://). I have taken the sources.xml to my local windows and when I open it, it allows me to see those sources. Are there some permissions, or options that I am missing? <sources> <programs> <default pathversion="1"></default> </programs> <video> <default pathversion="1"></default> <source> <name>Movies</name> <path pathversion="1">nfs://192.168.86.30/media/Movies/</path> <allowsharing>true</allowsharing> </source> <source> <name>TV Series</name> <path pathversion="1">nfs://192.168.86.30/media/TV/</path> <allowsharing>true</allowsharing> </source> </video> <music> <default pathversion="1"></default> </music> <pictures> <default pathversion="1"></default> </pictures> <files> <default pathversion="1"></default> </files> </sources> <advancedsettings> <!-- ##################################################### # For more information on the settings available in # # this file, refer to the kodi wiki at # # http://kodi.wiki/view/Advancedsettings.xml # ##################################################### --> <videodatabase> <type>mysql</type> <!-- don't change this value --> <host>192.168.86.53</host> <!-- change this to the IP address of your mysql/mariadb server --> <port>3306</port> <!-- change this to the port of your mysql/mariadb server --> <user>root</user> <!-- change this to the user for your database, not root --> <pass>*****</pass> <!-- change this to the password for your database --> </videodatabase> <musicdatabase> <type>mysql</type> <!-- don't change this value --> <host>192.168.86.53</host> <!-- change this to the IP address of your mysql/mariadb server --> <port>3306</port> <!-- change this to the port of your mysql/mariadb server --> <user>root</user> <!-- change this to the user for your database, not root --> <pass>*****</pass> <!-- change this to the password for your database --> </musicdatabase> <services> <devicename>KODI Server</devicename> <esallinterfaces>true</esallinterfaces> <!-- don't change this value --> <escontinuousdelay>25</escontinuousdelay> <esenabled>true</esenabled> <!-- don't change this value --> <esinitialdelay>750</esinitialdelay> <esmaxclients>20</esmaxclients> <esport>9777</esport> <!-- don't change this value --> <esportrange>10</esportrange> <upnpannounce>true</upnpannounce> <upnprenderer>false</upnprenderer> <upnpserver>true</upnpserver> <webserver>true</webserver> <!-- don't change this value --> <webserverpassword>kodi</webserverpassword> <webserverport>8080</webserverport> <!-- don't change this value --> <webserverusername>kodi</webserverusername> <webskin>webinterface.default</webskin> <zeroconf>true</zeroconf> </services> <videolibrary> <importresumepoint>true</importresumepoint> <!-- import previously exported resume point from .nfo files --> <importwatchedstate>true</importwatchedstate> <!-- import previously exported playdate and playcount from .nfo files --> <backgroundupdate>true</backgroundupdate> <dateadded>1</dateadded> <!-- 0 results in using the current datetime when adding a video; 1 (default) results in prefering to use the files mtime (if it's valid) and only using the file's ctime if the mtime isn't valid; 2 results in using the newer datetime of the file's mtime and ctime --> </videolibrary> <musiclibrary> <backgroundupdate>true</backgroundupdate> <!-- don't change this value --> </musiclibrary> <videoscanner> <ignoreerrors>true</ignoreerrors> <!-- Set to true to silently ignore errors while scanning videos. This prevents the error dialogue box, so you don't have to keep hitting "yes" to keep scanning.--> </videoscanner> <splash>false</splash> <bginfoloadermaxthreads>2</bginfoloadermaxthreads> <myvideos> <extractflags>false</extractflags> <extractthumb>false</extractthumb> </myvideos> <lookandfeel> <enablerssfeeds>false</enablerssfeeds> </lookandfeel> <audiooutput> <guisoundmode>0</guisoundmode> <ac3passthrough>false</ac3passthrough> <dtspassthrough>false</dtspassthrough> <multichannellpcm>false</multichannellpcm> <truehdpassthrough>false</truehdpassthrough> <dtshdpassthrough>false</dtshdpassthrough> <mode>2</mode> </audiooutput> <videoscreen> <vsync>2</vsync> </videoscreen> <input> <enablemouse>false</enablemouse> <remoteaskeyboard>false</remoteaskeyboard> </input> <general> <addonnotifications>false</addonnotifications> </general> <skinsettings> <setting type="bool" name="skin.confluence.FirstTimeRun">false</setting> </skinsettings> </advancedsettings> 12:45:13.163 T:22810394347520 WARNING: VIDEO database configuration is experimental. 12:45:13.163 T:22810394347520 NOTICE: Default Video Player: VideoPlayer 12:45:13.163 T:22810394347520 NOTICE: Default Audio Player: paplayer 12:45:13.163 T:22810394347520 NOTICE: Disabled debug logging due to GUI setting. Level 0. 12:45:13.163 T:22810394347520 NOTICE: Log level changed to "LOG_LEVEL_NORMAL" 12:45:13.163 T:22810394347520 NOTICE: CMediaSourceSettings: loading media sources from special://masterprofile/sources.xml 12:45:13.163 T:22810394347520 NOTICE: Loading player core factory settings from special://xbmc/system/playercorefactory.xml. 12:45:13.164 T:22810394347520 NOTICE: Loaded playercorefactory configuration 12:45:13.164 T:22810394347520 NOTICE: Loading player core factory settings from special://masterprofile/playercorefactory.xml. 12:45:13.164 T:22810394347520 NOTICE: special://masterprofile/playercorefactory.xml does not exist. Skipping. 16:45:13.195 T:22810394347520 NOTICE: Running database version Addons27 16:45:13.396 T:22810394347520 NOTICE: ADDONS: Using repository repository.xbmc.org 16:45:13.398 T:22809938822912 NOTICE: No Devices found - retry: 4 16:45:14.898 T:22809938822912 NOTICE: No Devices found - retry: 3 16:45:16.399 T:22809938822912 NOTICE: No Devices found - retry: 2 16:45:17.899 T:22809938822912 NOTICE: No Devices found - retry: 1 16:45:19.400 T:22809938822912 NOTICE: Found 0 Lists of Devices 16:45:19.404 T:22809938822912 WARNING: ActiveAE::Configure - sink returned large buffer of 249 ms, reducing to 100 ms 16:45:19.497 T:22809940924160 NOTICE: Running database version Addons27 16:45:19.497 T:22809940924160 NOTICE: Running database version ViewModes6 16:45:19.498 T:22809940924160 NOTICE: Running database version Textures13 16:45:19.507 T:22809940924160 NOTICE: Running database version MyMusic60 16:45:19.514 T:22809940924160 NOTICE: Running database version MyVideos107 16:45:19.515 T:22809940924160 NOTICE: Running database version TV29 16:45:19.517 T:22809940924160 NOTICE: Running database version Epg11 16:45:19.525 T:22810394347520 WARNING: JSONRPC: Could not parse type "Setting.Details.SettingList" 16:45:19.538 T:22810394347520 NOTICE: initialize done 16:45:19.538 T:22810394347520 NOTICE: Running the application... 16:45:19.538 T:22810394347520 NOTICE: CWebServer[8080]: Started 16:45:19.538 T:22810394347520 NOTICE: starting upnp client 16:45:19.539 T:22810394347520 NOTICE: starting upnp server 16:45:19.541 T:22809153615616 NOTICE: ES: Starting UDP Event server on port 9777 16:45:19.541 T:22809153615616 NOTICE: UDP: Listening on port 9777 (ipv6 : true) 16:45:25.333 T:22810394347520 NOTICE: Cleanup: Starting musicdatabase cleanup .. 16:45:25.549 T:22810394347520 ERROR: SQL: [MyMusic60] The table does not exist Query: select count(idSong) as NumSongs from songview 16:45:25.549 T:22810394347520 ERROR: GetSongsCount() failed 16:45:25.550 T:22810394347520 NOTICE: Cleanup: Cleaning musicdatabase done. Operation took 00:00 16:45:28.474 T:22810394347520 NOTICE: CleanDatabase: Starting videodatabase cleanup .. 16:45:32.188 T:22809940924160 NOTICE: VideoInfoScanner: Starting scan .. 16:45:32.188 T:22809940924160 NOTICE: VideoInfoScanner: Finished scan. Scanning for video info took 00:00 Thanks for help! -RS

I found the issue today. Apparently if you give the docker app an IP vs Bridge mode it upsets it. The port was already assigned to another Docker app, so I reassigned that app, and put mylar back to bridge mode, and it works just fine. Thanks.

Hello, I am new to unRaid (infact, my demo just ended and I just bought my license today). I have gotten many docker apps working (with the help of google and youtube.) But this one is kicking my butt, and I am really not sure if its something I am doing, or an issue (as I saw a bug report for the same thing in github, from a year ago). I have : sonarr, radarr, nzbget, rtorrentvpn, emby, clibre, tinymediamanager, ubooquity, all working with no issues. when I run mylar, it searchs, pulls down series, makes folders in my /comics folder, and processes downloads, if I manually put them in the /download folder, and run a manual scan. What I am getting an errors on, is when its trying to pass a nzb to nzbget. : -------- Error-------- Uncaught exception: Traceback (most recent call last):File "/app/mylar/mylar/logger.py", line 177, in new_runold_run(*args, **kwargs)File "/usr/lib/python2.7/threading.py", line 754, in runself.__target(*self.__args, **self.__kwargs)File "/app/mylar/mylar/search.py", line 1795, in searchforissuefoundNZB, prov = search_init(comic['ComicName'], result['Issue_Number'], str(ComicYear), comic['ComicYear'], Publisher, IssueDate, StoreDate, result['IssueID'], AlternateSearch, UseFuzzy, ComicVersion, SARC=None, IssueArcID=None, mode=mode, rsscheck=rsscheck, ComicID=result['ComicID'], filesafe=comic['ComicName_Filesafe'], allow_packs=AllowPacks)File "/app/mylar/mylar/search.py", line 255, in search_initfindit = NZB_SEARCH(ComicName, IssueNumber, ComicYear, SeriesYear, Publisher, IssueDate, StoreDate, searchprov, send_prov_count, IssDateFix, IssueID, UseFuzzy, newznab_host, ComicVersion=ComicVersion, SARC=SARC, IssueArcID=IssueArcID, RSS="no", ComicID=ComicID, issuetitle=issuetitle, unaltered_ComicName=unaltered_ComicName, allow_packs=allow_packs, oneoff=oneoff)File "/app/mylar/mylar/search.py", line 1629, in NZB_SEARCHsearchresult = searcher(nzbprov, nzbname, comicinfo, links, IssueID, ComicID, tmpprov, newznab=newznab_host)File "/app/mylar/mylar/search.py", line 2368, in searcherlogger.warn('Unable to send nzb file to NZBGet. There was a parameter error as there are no values present: %s' % nzbget_params)NameError: global name 'nzbget_params' is not defined ---- EOF ----- I checked paths, permissions, google, etc. Any help would be greatly appreciated. THanks

That did the trick! Thanks!

Hello, I am new to unRaid. (as in less then 1 week) I used to use DrivePool on a Windows 2012 R2 Server, and after poking at unRaid decided to pull the trigger and give it a go. System : Ryzen 7 1700 8GB Ram 3 x 8TB (WD Red) 4 x 4TB (WD Red) 1 x 240GB SSD (Samsung Pro) I am using Sonarr/Radarr/nzbGet (all Binhex) When the new files are brought in (to SSD), and then moved to the my proper storage on the array, the permissions are changed to Read Only, thus keeping me from running TMM to rename, and clean up. I looked around the forums and google, and found a few people who said to make changes to the container permissions, (UID/PID) which didn't seem like the right solution to me. Anyone have any suggestions, or point me to the right spot to look. THanks