suender

Vielen Dank für die Rückmeldungen: @ich777 @alturismo. Ich ziehe VMs aufgrund ihrer Einfachheit und Stabilität beim USB Passthrough vor, was für die Smart-Home-Funktionalität beim Home Assistant entscheidend ist. Ich hatte leider nie Erfolg mit der Docker-Version von OctoPrint, aber ich sehe gerade, dass es jetzt eine neue Version gibt (vielleicht werde ich sie testen). Ich habe alle Pis verkauft, da ich alles über Unraid steuern möchte und keinen Bedarf mehr habe. Ich denke auch, dass das Problem mit der Hardware zusammenhängt, insbesondere werde ich mein Augenmerk auf das Netzteil richten. 350W sind wirklich wenig. Das war Teil meines ursprünglichen Servers J4005 und ich werde ein Upgrade durchführen müssen.

Seit einiger Zeit, aber seit ein paar Tagen immer häufiger habe ich ungeplante Neustarts an meinem Server. Ich weiss nicht, ob es an der Hitze liegt, aber immer wenn ich auf dem VM, wo HomeAssistant läuft (USB ZigBee Adapter wird durchgereicht) kommt es zu Abstürzen. Ich habe noch Version 6.11.5 bei mir installiert. Grüße @ich777 serverchen-diagnostics-20230716-2132.zip

Unfortunately have a completely different problem with unplanned server crashes.... I open a new post. Habe leider ein ganz anderes Problem mit ungeplanten Serverabstürzen... Ich öffne einen neuen Beitrag. @ich777

Was slightly excited today, sorry perhaps for my manner. Here is the file as requested. serverchen-diagnostics-20230714-2358.zip

It was this damn "RTL8168 Drivers Plugin". I have manually deleted in the modprobe.d directory of myFlashDisk this file "r8169.conf" from this plugin "RTL8168 Drivers". Get Access to the Dashboard and kill this Plugin! Never this Plugin. U should forbidden it.

Unfortunately, today I installed a plugin called RealTek (?) from the Appstore of unraid. Since reboot I get this message. I also can not log into the dashboard without lan connection. How can I delete this stupid plugin, please help.

Toll, was ihr hier macht.

I get today this Warning: Your server has run out of memory, and processes (potentially required) are being killed off. I want post my diagnostics and ask for assistance on this Unraid forum. What can I do? Many thanks. tower-diagnostics-20230115-0720.zip

I have now finally been able to remove the cache drive and replace it with one, I have been online for about four hours and still no errors. Let's wait and see.

Unfortunately, the internet connection on my server has recently failed again. The VMs have internet, local access also works; however, the Dockers have no internet. Enclosed is the diagnostic data. tower-diagnostics-20221226-2034.zip

Thank you for taking the time to look at the logs. Yesterday night it happened again. At the moment, the connection is still there (after a reboot, there is always internet access for a few hours), but I think there will be no internet access again today. At the moment, my server has Internet access, as do all the other devices. If it crashes again, only the Docker (Plex) files will not have internet, but VM drives (Home Assistant) will not, they would have internet. I noticed that the drive on which the cache is located is reporting errors. Could it be related to this?

Hello, I am turning to you because unfortunately I cannot find a solution for the sudden end of Internet access on my server. After restarting the server, Internet access works for a few hours and then, at some point during the day, I get an error message asking me to read this information ------------ Download of appfeed failed. Community Applications requires your server to have internet access. The most common cause of this failure is a failure to resolve DNS addresses. You can try and reset your modem and router to fix this issue, or set static DNS addresses (Settings - Network Settings) of 208.67.222.222 and 208.67.220.220 and try again. Alternatively, there is also a chance that the server handling the application feed is temporarily down. Last JSON error Recorded: Syntax error ------------ I have already used the recommendations there, but the above problem persists. Enclosed is the diagnostic data. tower-diagnostics-20221226-0906.zip

Hello dear friends. For about an hour now I have not had any access to my directory via Plex. I have not changed anything. I get the following error message (shortened): (...) 2022/07/19 00:27:48 DEBUG : gdrive: Loaded invalid token from config file - ignoring 2022/07/19 00:27:48 DEBUG : gdrive: Token refresh failed try 1/5: oauth2: cannot fetch token: 400 Bad Request Response: { "error": "invalid_grant", "error_description": "Token has been expired or revoked." } 2022/07/19 00:27:49 DEBUG : gdrive: Loaded invalid token from config file - ignoring 2022/07/19 00:27:49 DEBUG : gdrive: Token refresh failed try 2/5: oauth2: cannot fetch token: 400 Bad Request Response: { "error": "invalid_grant", "error_description": "Token has been expired or revoked." } 2022/07/19 00:27:50 DEBUG : gdrive: Loaded invalid token from config file - ignoring 2022/07/19 00:27:50 DEBUG : gdrive: Token refresh failed try 3/5: oauth2: cannot fetch token: 400 Bad Request Response: { "error": "invalid_grant", "error_description": "Token has been expired or revoked." (...) Update: RESOLVED today Thank you very much for your kind support. I used this command: "rclone config reconnect gdrive:" There I got the code "CODE" for creating a new token. I did not close the window because another CODE is needed. On my iMac I installed clone (https://www.youtube.com/watch?v=xfRjo2q0xkw) and entered this command: "./rclone authorize "drive" "CODE" I then received another code, which I entered in the other window.

# REQUIRED SETTINGS RcloneCommand="move" # choose your rclone command e.g. move, copy, sync RcloneRemoteName="gdrive_media_vfs" # Name of rclone remote mount WITHOUT ':'. RcloneUploadRemoteName="gdrive_media_vfs" # If you have a second remote created for uploads put it here. Otherwise use the same remote as RcloneRemoteName. LocalFilesShare="/mnt/user/local" # location of the local files without trailing slash you want to rclone to use RcloneMountShare="/mnt/user/mount_rclone" # where your rclone mount is located without trailing slash e.g. /mnt/user/mount_rclone MinimumAge="15m" # sync files suffix ms|s|m|h|d|w|M|y ModSort="ascending" # "ascending" oldest files first, "descending" newest files first I have this settings and i cannot delete the files. I get this error: 2022/01/06 16:22:20 DEBUG : tv: Failed to Rmdir: remove /mnt/user/local/gdrive_media_vfs/tv: directory not empty 2022/01/06 16:22:20 DEBUG : Local file system at /mnt/user/local/gdrive_media_vfs: failed to delete 2 directories What is my mistake?

I have exchanged my Ryzen 1700 (over 70 Watt, no bios modifications) into this system since yesterday: J5005. (4 Cores) I have with 2x10TB HDD and 1X500GB SSD only 24 Watt (IDLE). Maximal Performance I get 32 Watt.

I want make a reverse proxy I edit the file "default" under /appdata/letsencrypt/nginx/site-conf location /webfonts { try_files $uri $uri/; } location / { # try_files $uri $uri/ /index.php?$query_string; # auth_basic "Restricted"; # auth_basic_user_file /config/nginx/.htpasswd; include /config/nginx/proxy.conf; proxy_pass http://192.168.178.21:7777; } but it don't work. I can't see the fonts.The font for arrow don't work. The arrow works only on the localsite, but not in the https (duckdns-site), but the font for arrow dont work. Can someone help me please? Error on Chrome Console: [Error] Failed to load http://xxx.duckdns.org/webfonts/fa-solid-900.woff2resource: the server responded with a status of 500 (Internal Server Error) (fa-solid-900.woff2, line 0) [Error] Failed to load http://xxx.duckdns.org/webfonts/fa-solid-900.woff2resource: the server responded with a status of 500 (Internal Server Error) (fa-solid-900.woff, line 0) [Error] Failed to load http://xxx.duckdns.org/webfonts/fa-solid-900.woff2resource: the server responded with a status of 500 (Internal Server Error) (fa-solid-900.ttf, line 0) [Error] Failed to load http://xxx.duckdns.org/webfonts/fa-solid-900.svg#fontawesomeresource: the server responded with a status of 500 (Internal Server Error) (fa-solid-900.svg, line 0)

You're right. Thanks for your hint. It was the wrong port.

No, unfortunately I get the same error again: 502 Bad Gateway

I want make a reverse proxy I edit the file "default" under /appdata/letsencrypt/nginx/site-conf location /nowshowing/ { include /config/nginx/proxy.conf; proxy_pass http://192.168.178.21:6678; } but it don't work. Can someone help me please?

Hi, I get this Error: "m3u files need to have specific formats, see the github page for more information" My plde.m3u has this content #EXTM3U #EXTINF:-1 tvg-id="" tvg-name="SHOW" tvg-logo="http://xxx.xxx.tv:8080/logos/usa%20cbs%20hd.png" group-title="United States",SHOW http://p2.xxx.com:8080/live/11052017/11052017/97.ts OK. SOLVED, Tom helps me. False URL Link in the config.

oh yes, many thanks...

Help, the "Edit XML" from the context menu is not more visible, when I click the VM icon to select. Can someone help me?

Thank u very much, u are my HERO, now I have a headless ryzen server with only one gpu.