dannycorker

Ah my bad, it was a permissions error on the 'disks/rclone_volume' path! Will have a play with it later this evening, but looking great at the moment, thanks!

Maybe I'm misunderstanding something - in Sonarr I have a mapping of /data <-> /mnt/disks/rclone_volume/, but if I browse to data within Sonarr, I just see the contents of my local /mnt/disks/rclone_volume/ folder? It doesn't seem that drive is actually getting mounted there.

Sorry to drag up an old thread - does this still work? I've installed the docker, ran the conf and I've got the /data drive showing within Sonarr which is great - I just don't seem to be getting the actual mount to happen at any point? Have I missed something obvious do you think?

Does anyone have any instructions for migrating from Influencers plugins to these new ones?

Every topic on here regarding releases seems to turn into a war about communication between Tom and the rest of us. As far as I'm concerned it is what it is, and I knew that going in so can hardly complain. On the other hand, I do think that some users on here forget that unRAID is a paid product, and its not unreasonable for users to expect some communication.

Array has been running fine for months on my HP Microserver, tried to start today and it gets stuck somewhere - running 5.0 RC2 (was planning to upgrade today!) On the main unRAID page, it just says 'Starting' indefinitely (and I have SimpleFeatures). unMENU thinks that the array has started, and if I browse from Windows I can only access the flash drive. I think the problem is something to do with my cache drive? My Syslog is attached below, hope it is a relatively simple fix? This is the only error thrown according to unMENU. Jun 18 22:30:45 Tower kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) (Drive related) Jun 18 22:30:45 Tower kernel: ata1.00: ATA-8: ST2000DL001-9VT156, CC94, max UDMA/133 (Drive related) Jun 18 22:30:45 Tower kernel: ata1.00: 3907029168 sectors, multi 0: LBA48 (Drive related) Jun 18 22:30:45 Tower kernel: ata1.00: configured for UDMA/133 (Drive related) Jun 18 22:30:45 Tower kernel: scsi 0:0:0:0: Direct-Access ATA ST2000DL001-9VT1 CC94 PQ: 0 ANSI: 5 (Drive related) Jun 18 22:30:45 Tower kernel: sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) (Drive related) Jun 18 22:30:45 Tower kernel: sd 0:0:0:0: [sda] 4096-byte physical blocks (Drive related) Jun 18 22:30:45 Tower kernel: sd 0:0:0:0: [sda] Write Protect is off (Drive related) Jun 18 22:30:45 Tower kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 (Drive related) Jun 18 22:30:45 Tower kernel: sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA (Drive related) Jun 18 22:30:45 Tower kernel: ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) (Drive related) Jun 18 22:30:45 Tower kernel: ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) (Drive related) Jun 18 22:30:45 Tower kernel: ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) (Drive related) Jun 18 22:30:45 Tower kernel: ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) (Drive related) Jun 18 22:30:45 Tower kernel: ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) (Drive related) Jun 18 22:30:45 Tower kernel: ata2.00: ATA-8: ST2000DL001-9VT156, CC94, max UDMA/133 (Drive related) Jun 18 22:30:45 Tower kernel: ata2.00: 3907029168 sectors, multi 0: LBA48 (Drive related) Jun 18 22:30:45 Tower kernel: ata5.00: failed to enable AA(error_mask=0x1) (Errors) Jun 18 22:30:45 Tower kernel: ata5.00: ATA-8: VB0250EAVER, HPG0, max UDMA/100 (Drive related) Jun 18 22:30:45 Tower kernel: ata5.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32) (Drive related) Jun 18 22:30:45 Tower kernel: ata6.00: ATA-8: ST2000DL003-9VT166, CC3C, max UDMA/133 (Drive related) Jun 18 22:30:45 Tower kernel: sda: sda1 (Drive related) Jun 18 22:30:45 Tower kernel: ata6.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32) (Drive related) Jun 18 22:30:45 Tower kernel: ata4.00: ATA-8: ST31000528AS, CC38, max UDMA/133 (Drive related) Jun 18 22:30:45 Tower kernel: ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) (Drive related) Jun 18 22:30:45 Tower kernel: ata2.00: configured for UDMA/133 (Drive related) Jun 18 22:30:45 Tower kernel: sd 0:0:0:0: [sda] Attached SCSI disk (Drive related) Jun 18 22:30:45 Tower kernel: scsi 1:0:0:0: Direct-Access ATA ST2000DL001-9VT1 CC94 PQ: 0 ANSI: 5 (Drive related) Jun 18 22:30:45 Tower kernel: ata5.00: failed to enable AA(error_mask=0x1) (Errors) Jun 18 22:30:45 Tower kernel: ata5.00: configured for UDMA/100 (Drive related) Jun 18 22:30:45 Tower kernel: ata6.00: configured for UDMA/133 (Drive related) syslog-2012-06-18.zip

Which version is better/most supported, this one or the one in the plugin forum?

Since 1.07 update, commas and full stops are the wrong way round for me in the web interface. This anything to do with display settings?

It should be... It did create itself fine on a reboot, and the mover is now working. Still absolutely clueless as to why it wasn't created and why my min free space was seemingly ignored.

Have noticed I don't have a user0 share for some reason, which I imagine is causing the problem. Still don't know why the cache has allowed itself to get so full? If I restart the array will user 0 be recreated?

Got back to my PC this morning to find the cache drive full and nothing moving from it. When I click 'Move NOw' I just get this message in the syslog, nothing else happes: emhttp: shcmd (70): /usr/local/sbin/mover |& logger & Here a syslog from the last few hours from when it got full to now. The Min Free Space for thecache is set to 40GB so I don't understand why it got so full. The shares which need to be written to both have over 2TB free space. The mover is supposed to run at the default time. Apr 17 08:07:13 Tower shfs/user: cache disk full Apr 17 08:07:46 Tower last message repeated 429 times Apr 17 08:10:43 Tower last message repeated 9 times Apr 17 08:11:46 Tower last message repeated 830 times Apr 17 08:11:54 Tower last message repeated 111 times Apr 17 08:11:54 Tower dhcpcd[991]: eth0: renewing lease of 10.181.7.86 Apr 17 08:11:54 Tower shfs/user: cache disk full Apr 17 08:11:54 Tower dhcpcd[991]: eth0: acknowledged 10.181.7.86 from 10.181.0.1 Apr 17 08:11:54 Tower shfs/user: cache disk full Apr 17 08:11:54 Tower shfs/user: cache disk full Apr 17 08:11:54 Tower dhcpcd[991]: eth0: leased 10.181.7.86 for 900 seconds Apr 17 08:11:54 Tower shfs/user: cache disk full Apr 17 08:13:49 Tower last message repeated 64 times Apr 17 08:14:50 Tower last message repeated 872 times Apr 17 08:16:22 Tower last message repeated 384 times Apr 17 08:17:23 Tower last message repeated 870 times Apr 17 08:19:09 Tower last message repeated 812 times Apr 17 08:19:24 Tower last message repeated 217 times Apr 17 08:19:24 Tower dhcpcd[991]: eth0: renewing lease of 10.181.7.86 Apr 17 08:19:24 Tower shfs/user: cache disk full Apr 17 08:19:24 Tower dhcpcd[991]: eth0: acknowledged 10.181.7.86 from 10.181.0.1 Apr 17 08:19:24 Tower dhcpcd[991]: eth0: leased 10.181.7.86 for 900 seconds Apr 17 08:19:24 Tower shfs/user: cache disk full Apr 17 08:19:55 Tower last message repeated 357 times Apr 17 08:21:35 Tower last message repeated 808 times Apr 17 08:22:36 Tower last message repeated 876 times Apr 17 08:23:54 Tower last message repeated 676 times Apr 17 08:24:55 Tower last message repeated 827 times Apr 17 08:26:09 Tower last message repeated 549 times Apr 17 08:26:54 Tower last message repeated 659 times Apr 17 08:26:54 Tower dhcpcd[991]: eth0: renewing lease of 10.181.7.86 Apr 17 08:26:54 Tower shfs/user: cache disk full Apr 17 08:26:54 Tower shfs/user: cache disk full Apr 17 08:26:54 Tower dhcpcd[991]: eth0: acknowledged 10.181.7.86 from 10.181.0.1 Apr 17 08:26:54 Tower dhcpcd[991]: eth0: leased 10.181.7.86 for 900 seconds Apr 17 08:26:54 Tower shfs/user: cache disk full Apr 17 08:27:25 Tower last message repeated 436 times Apr 17 08:28:46 Tower last message repeated 671 times Apr 17 08:29:47 Tower last message repeated 872 times Apr 17 08:30:48 Tower last message repeated 845 times Apr 17 08:31:49 Tower last message repeated 524 times Apr 17 08:32:50 Tower last message repeated 832 times Apr 17 08:33:06 Tower last message repeated 211 times Apr 17 08:33:06 Tower shfs/user: shfs_write: write: (28) No space left on device Apr 17 08:33:07 Tower shfs/user: cache disk full Apr 17 08:33:38 Tower last message repeated 220 times Apr 17 08:34:24 Tower last message repeated 679 times Apr 17 08:34:25 Tower dhcpcd[991]: eth0: renewing lease of 10.181.7.86 Apr 17 08:34:25 Tower shfs/user: cache disk full Apr 17 08:34:25 Tower dhcpcd[991]: eth0: acknowledged 10.181.7.86 from 10.181.0.1 Apr 17 08:34:25 Tower dhcpcd[991]: eth0: leased 10.181.7.86 for 900 seconds Apr 17 08:34:25 Tower shfs/user: cache disk full Apr 17 08:34:57 Tower last message repeated 367 times Apr 17 08:35:32 Tower last message repeated 439 times Apr 17 08:35:32 Tower shfs/user: shfs_write: write: (28) No space left on device Apr 17 08:35:32 Tower shfs/user: cache disk full Apr 17 08:36:03 Tower last message repeated 287 times Apr 17 08:37:04 Tower last message repeated 790 times Apr 17 08:37:52 Tower last message repeated 653 times Apr 17 08:37:52 Tower shfs/user: shfs_write: write: (28) No space left on device Apr 17 08:37:52 Tower shfs/user: cache disk full Apr 17 08:38:23 Tower last message repeated 330 times Apr 17 08:39:24 Tower last message repeated 746 times Apr 17 08:40:05 Tower last message repeated 545 times Apr 17 08:40:05 Tower shfs/user: shfs_write: write: (28) No space left on device Apr 17 08:40:05 Tower shfs/user: cache disk full Apr 17 08:40:36 Tower last message repeated 386 times Apr 17 08:41:37 Tower last message repeated 884 times Apr 17 08:41:55 Tower last message repeated 259 times Apr 17 08:41:55 Tower dhcpcd[991]: eth0: renewing lease of 10.181.7.86 Apr 17 08:41:55 Tower dhcpcd[991]: eth0: acknowledged 10.181.7.86 from 10.181.0.1 Apr 17 08:41:55 Tower shfs/user: cache disk full Apr 17 08:41:55 Tower dhcpcd[991]: eth0: leased 10.181.7.86 for 900 seconds Apr 17 08:41:55 Tower shfs/user: cache disk full Apr 17 08:42:02 Tower last message repeated 108 times Apr 17 08:42:02 Tower shfs/user: shfs_write: write: (28) No space left on device Apr 17 08:42:02 Tower shfs/user: cache disk full Apr 17 08:42:33 Tower last message repeated 419 times Apr 17 08:43:34 Tower last message repeated 715 times Apr 17 08:44:00 Tower last message repeated 333 times Apr 17 08:44:00 Tower shfs/user: shfs_write: write: (28) No space left on device Apr 17 08:44:00 Tower shfs/user: cache disk full Apr 17 08:44:31 Tower last message repeated 395 times Apr 17 08:45:32 Tower last message repeated 799 times Apr 17 08:46:13 Tower last message repeated 535 times Apr 17 08:46:13 Tower shfs/user: shfs_write: write: (28) No space left on device Apr 17 08:46:13 Tower shfs/user: cache disk full Apr 17 08:46:44 Tower last message repeated 405 times Apr 17 08:47:45 Tower last message repeated 715 times Apr 17 08:48:11 Tower last message repeated 378 times Apr 17 08:48:11 Tower shfs/user: shfs_write: write: (28) No space left on device Apr 17 08:48:12 Tower shfs/user: cache disk full Apr 17 08:48:43 Tower last message repeated 360 times Apr 17 08:49:25 Tower last message repeated 554 times Apr 17 08:49:25 Tower dhcpcd[991]: eth0: renewing lease of 10.181.7.86 Apr 17 08:49:25 Tower dhcpcd[991]: eth0: acknowledged 10.181.7.86 from 10.181.0.1 Apr 17 08:49:25 Tower dhcpcd[991]: eth0: leased 10.181.7.86 for 900 seconds Apr 17 08:49:25 Tower shfs/user: cache disk full Apr 17 08:49:56 Tower last message repeated 443 times Apr 17 08:50:23 Tower last message repeated 354 times Apr 17 08:50:23 Tower shfs/user: shfs_write: write: (28) No space left on device Apr 17 08:50:23 Tower shfs/user: cache disk full Apr 17 08:50:24 Tower last message repeated 6 times Apr 17 08:50:27 Tower shfs/user: shfs_rmdir: rmdir: /mnt/cache/Downloads/Incomplete/Lost.S03.720p.BluRay.DTS.x264-ESiR/__ADMIN__ (39) Directory not empty Apr 17 08:50:27 Tower shfs/user: shfs_rmdir: rmdir: /mnt/disk3/Downloads/Incomplete/Lost.S03.720p.BluRay.DTS.x264-ESiR/__ADMIN__ (39) Directory not empty Apr 17 08:50:27 Tower shfs/user: shfs_rmdir: rmdir: /mnt/cache/Downloads/Incomplete/Lost.S03.720p.BluRay.DTS.x264-ESiR (39) Directory not empty Apr 17 08:50:44 Tower shfs/user: cache disk full Apr 17 08:51:16 Tower last message repeated 122 times Apr 17 08:52:17 Tower last message repeated 365 times Apr 17 08:53:18 Tower last message repeated 366 times Apr 17 08:54:19 Tower last message repeated 369 times Apr 17 08:55:24 Tower last message repeated 215 times Apr 17 08:56:25 Tower last message repeated 238 times Apr 17 08:56:54 Tower last message repeated 141 times Apr 17 08:56:55 Tower dhcpcd[991]: eth0: renewing lease of 10.181.7.86 Apr 17 08:56:55 Tower dhcpcd[991]: eth0: acknowledged 10.181.7.86 from 10.181.0.1 Apr 17 08:56:55 Tower dhcpcd[991]: eth0: leased 10.181.7.86 for 900 seconds Apr 17 08:56:56 Tower shfs/user: cache disk full Apr 17 08:57:34 Tower last message repeated 50 times Apr 17 08:58:35 Tower last message repeated 434 times Apr 17 08:59:38 Tower last message repeated 205 times Apr 17 09:00:41 Tower last message repeated 324 times Apr 17 09:01:46 Tower last message repeated 538 times Apr 17 09:02:49 Tower last message repeated 580 times Apr 17 09:03:52 Tower last message repeated 582 times Apr 17 09:04:25 Tower last message repeated 270 times Apr 17 09:04:25 Tower dhcpcd[991]: eth0: renewing lease of 10.181.7.86 Apr 17 09:04:25 Tower dhcpcd[991]: eth0: acknowledged 10.181.7.86 from 10.181.0.1 Apr 17 09:04:25 Tower dhcpcd[991]: eth0: leased 10.181.7.86 for 900 seconds Apr 17 09:04:26 Tower shfs/user: cache disk full Apr 17 09:04:59 Tower last message repeated 322 times Apr 17 09:06:00 Tower last message repeated 674 times Apr 17 09:07:01 Tower last message repeated 766 times Apr 17 09:08:02 Tower last message repeated 560 times Apr 17 09:09:03 Tower last message repeated 653 times Apr 17 09:10:04 Tower last message repeated 496 times Apr 17 09:11:11 Tower last message repeated 600 times Apr 17 09:11:51 Tower last message repeated 462 times Apr 17 09:11:56 Tower dhcpcd[991]: eth0: renewing lease of 10.181.7.86 Apr 17 09:11:56 Tower dhcpcd[991]: eth0: acknowledged 10.181.7.86 from 10.181.0.1 Apr 17 09:11:56 Tower dhcpcd[991]: eth0: leased 10.181.7.86 for 900 seconds Apr 17 09:11:58 Tower shfs/user: cache disk full Apr 17 09:12:30 Tower last message repeated 221 times Apr 17 09:13:36 Tower last message repeated 697 times Apr 17 09:14:38 Tower last message repeated 651 times Apr 17 09:15:39 Tower last message repeated 646 times Apr 17 09:16:40 Tower last message repeated 587 times Apr 17 09:17:41 Tower last message repeated 721 times Apr 17 09:18:42 Tower last message repeated 748 times Apr 17 09:19:26 Tower last message repeated 538 times Apr 17 09:19:26 Tower dhcpcd[991]: eth0: renewing lease of 10.181.7.86 Apr 17 09:19:26 Tower shfs/user: cache disk full Apr 17 09:19:26 Tower dhcpcd[991]: eth0: acknowledged 10.181.7.86 from 10.181.0.1 Apr 17 09:19:26 Tower shfs/user: cache disk full Apr 17 09:19:26 Tower dhcpcd[991]: eth0: leased 10.181.7.86 for 900 seconds Apr 17 09:19:26 Tower shfs/user: cache disk full Apr 17 09:19:58 Tower last message repeated 378 times Apr 17 09:20:59 Tower last message repeated 657 times Apr 17 09:22:00 Tower last message repeated 659 times Apr 17 09:23:01 Tower last message repeated 836 times Apr 17 09:24:02 Tower last message repeated 712 times Apr 17 09:25:07 Tower last message repeated 610 times Apr 17 09:26:09 Tower last message repeated 735 times Apr 17 09:26:56 Tower last message repeated 663 times Apr 17 09:26:56 Tower dhcpcd[991]: eth0: renewing lease of 10.181.7.86 Apr 17 09:26:56 Tower dhcpcd[991]: eth0: acknowledged 10.181.7.86 from 10.181.0.1 Apr 17 09:26:56 Tower shfs/user: cache disk full Apr 17 09:26:56 Tower shfs/user: cache disk full Apr 17 09:26:56 Tower dhcpcd[991]: eth0: leased 10.181.7.86 for 900 seconds Apr 17 09:26:56 Tower shfs/user: cache disk full Apr 17 09:27:27 Tower last message repeated 322 times Apr 17 09:28:29 Tower last message repeated 751 times Apr 17 09:29:30 Tower last message repeated 591 times Apr 17 09:30:32 Tower last message repeated 795 times Apr 17 09:31:35 Tower last message repeated 765 times Apr 17 09:32:43 Tower last message repeated 673 times Apr 17 09:33:44 Tower last message repeated 618 times Apr 17 09:34:25 Tower last message repeated 528 times Apr 17 09:34:26 Tower dhcpcd[991]: eth0: renewing lease of 10.181.7.86 Apr 17 09:34:26 Tower dhcpcd[991]: eth0: acknowledged 10.181.7.86 from 10.181.0.1 Apr 17 09:34:26 Tower dhcpcd[991]: eth0: leased 10.181.7.86 for 900 seconds Apr 17 09:34:26 Tower shfs/user: cache disk full Apr 17 09:34:57 Tower last message repeated 402 times Apr 17 09:35:58 Tower last message repeated 624 times Apr 17 09:37:01 Tower last message repeated 660 times Apr 17 09:38:02 Tower last message repeated 790 times Apr 17 09:39:04 Tower last message repeated 733 times Apr 17 09:40:05 Tower last message repeated 843 times Apr 17 09:41:06 Tower last message repeated 606 times Apr 17 09:41:52 Tower last message repeated 497 times Apr 17 09:41:56 Tower dhcpcd[991]: eth0: renewing lease of 10.181.7.86 Apr 17 09:41:56 Tower dhcpcd[991]: eth0: acknowledged 10.181.7.86 from 10.181.0.1 Apr 17 09:41:57 Tower dhcpcd[991]: eth0: leased 10.181.7.86 for 900 seconds Apr 17 09:41:57 Tower shfs/user: cache disk full Apr 17 09:42:28 Tower last message repeated 422 times Apr 17 09:43:29 Tower last message repeated 744 times Apr 17 09:44:31 Tower last message repeated 720 times Apr 17 09:45:32 Tower last message repeated 587 times Apr 17 09:46:34 Tower last message repeated 754 times Apr 17 09:47:35 Tower last message repeated 790 times Apr 17 09:48:36 Tower last message repeated 713 times Apr 17 09:49:27 Tower last message repeated 503 times Apr 17 09:49:27 Tower dhcpcd[991]: eth0: renewing lease of 10.181.7.86 Apr 17 09:49:27 Tower dhcpcd[991]: eth0: acknowledged 10.181.7.86 from 10.181.0.1 Apr 17 09:49:27 Tower shfs/user: cache disk full Apr 17 09:49:27 Tower dhcpcd[991]: eth0: leased 10.181.7.86 for 900 seconds Apr 17 09:49:27 Tower shfs/user: cache disk full Apr 17 09:49:58 Tower last message repeated 293 times Apr 17 09:50:59 Tower last message repeated 855 times Apr 17 09:52:00 Tower last message repeated 831 times Apr 17 09:53:01 Tower last message repeated 612 times Apr 17 09:54:02 Tower last message repeated 839 times Apr 17 09:55:03 Tower last message repeated 592 times Apr 17 09:56:04 Tower last message repeated 792 times Apr 17 09:56:56 Tower last message repeated 562 times Apr 17 09:56:57 Tower dhcpcd[991]: eth0: renewing lease of 10.181.7.86 Apr 17 09:56:57 Tower dhcpcd[991]: eth0: acknowledged 10.181.7.86 from 10.181.0.1 Apr 17 09:56:57 Tower dhcpcd[991]: eth0: leased 10.181.7.86 for 900 seconds Apr 17 09:57:02 Tower shfs/user: cache disk full Apr 17 09:57:33 Tower last message repeated 291 times Apr 17 09:58:34 Tower last message repeated 668 times Apr 17 09:58:48 Tower last message repeated 196 times Apr 17 09:59:48 Tower emhttp: shcmd (63): /usr/local/sbin/mover |& logger & Apr 17 10:02:01 Tower emhttp: shcmd (64): /usr/local/sbin/mover |& logger & Apr 17 10:04:27 Tower dhcpcd[991]: eth0: renewing lease of 10.181.7.86 Apr 17 10:04:27 Tower dhcpcd[991]: eth0: acknowledged 10.181.7.86 from 10.181.0.1 Apr 17 10:04:27 Tower dhcpcd[991]: eth0: leased 10.181.7.86 for 900 seconds Apr 17 10:05:43 Tower emhttp: shcmd (65): /usr/local/sbin/mover |& logger & Apr 17 10:06:49 Tower emhttp: shcmd (66): :>/etc/samba/smb-shares.conf Apr 17 10:06:49 Tower emhttp: Restart SMB... Apr 17 10:06:49 Tower emhttp: shcmd (67): killall -HUP smbd Apr 17 10:06:49 Tower emhttp: shcmd (68): ps axc | grep -q rpc.mountd Apr 17 10:06:49 Tower emhttp: _shcmd: shcmd (68): exit status: 1 Apr 17 10:06:49 Tower emhttp: shcmd (69): /usr/local/sbin/emhttp_event svcs_restarted Apr 17 10:06:49 Tower emhttp_event: svcs_restarted Apr 17 10:07:06 Tower emhttp: shcmd (70): /usr/local/sbin/mover |& logger & Apr 17 10:08:08 Tower shfs/user: cache disk full Apr 17 10:08:39 Tower last message repeated 54 times Apr 17 10:09:41 Tower last message repeated 297 times Apr 17 10:10:42 Tower last message repeated 302 times

I have a 250gb cache drive in my machine, and have noticed this morning that for my TV Shows share, nfo and tbn files (~50kb) are being saved to it, but mkv files (~1.1GB) are going straight to the array instead. I have Min Free Space set at 40,000,000 (40GB?) and have 241GB free space, so don't understand this behaviour?

I see, had a feeling it would be to do with High Water. So what will happen if files keep being saved to that disk dues to split level and it reaches Min Free Space? Also, if I were to manually move Game of Thrones season 2 to a different disk, would new files automatically be saved to that new disk?

Bumping to look for help.

Any chance there's still development here? Love Maraschino

Had a server up and running for a while now, just noticed a little problem. I have 3 data drives in at the moment (2TB, 2TB, 1TB) and one has gotten dangerously low on space (~90GB), but unfortunately has many current seasons of TV Shows on it so keeps being used. I'm moving some old stuff off of it to remedy this, but was surprised to see Game of Thrones Season 2 get created on that disk. With my Split Level etc, I would have expected this to be put on one of the disks with more space left. So I'm listingt my settings here in the hope I've made a mistake somewhere that someone can help me fix! Share - TV Shows Structure TV Shows ---Game of Thrones ------Season 2 ---------S02E01 - The North Remembers - HD TV.mkv Split Level - 2 Allocation Method - High Water Disks Included - All With a Split Level of 2 I thought that Series could span drives, but Seasons would be forced to stay on the same drive? So I don't understand why Season 2 of Game of Thrones has started on the drive that hardly has any space left? These are the values for space at the moment.... Disk 1 - Size 2TB, Used 1.74TB Disk 2 - Size 1TB, Used 746GB Disk 3 - Size 2TB, Used 1.92TB So if anyone has any advice I'd be very appreciative? I also have a new drive coming this week by he way to help with the lack of space!

First off, I'm running 5.0b12a. I set up a 'Music' user share a few days ago, and then copied my music over to the server. Have just noticed that its still sitting on cache drive. This is what the mover script says in log: Feb 1 05:30:59 Tower logger: mover started Feb 1 05:30:59 Tower logger: skipping Music/ Feb 1 05:30:59 Tower logger: moving TV Shows/ Feb 1 05:30:59 Tower logger: ./TV Shows/QI/Season 9/S09E01 - I-Spy - HD TV.nfo Feb 1 05:30:59 Tower logger: .d..t...... TV Shows/ Feb 1 05:30:59 Tower logger: .d..t...... TV Shows/QI/ Feb 1 05:30:59 Tower logger: .d..t...... TV Shows/QI/Season 9/ Feb 1 05:30:59 Tower logger: >f+++++++++ TV Shows/QI/Season 9/S09E01 - I-Spy - HD TV.nfo Feb 1 05:30:59 Tower logger: ./TV Shows/QI/Season 9/S09E01 - I-Spy - HD TV.tbn Feb 1 05:30:59 Tower logger: .d..t...... TV Shows/QI/Season 9/ Feb 1 05:30:59 Tower logger: >f+++++++++ TV Shows/QI/Season 9/S09E01 - I-Spy - HD TV.tbn Feb 1 05:31:00 Tower logger: ./TV Shows/QI/Season 9 Feb 1 05:31:00 Tower logger: .d..t...... TV Shows/QI/Season 9/ Feb 1 05:31:00 Tower logger: ./TV Shows/QI Feb 1 05:31:00 Tower logger: .d..t...... TV Shows/QI/ Feb 1 05:31:00 Tower logger: ./TV Shows/ Feb 1 05:31:00 Tower logger: .d..t...... TV Shows/ Feb 1 05:31:00 Tower logger: mover finished The user share for music is set to split level 1, high water with no minimum space and all disks included. Any ideas?

I seem to be getting stuck at the first hurdle I use Putty to telnet into the machine, after installing mysql and the swapfile, but after running the first command (mysql -u root -p) all I get is an error: ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password:ES). I get the same error with whatever word I try instead of root as well EDIT: Nevermind, a 3rd reinstall seemed to fix it...

All seems good now, there were some high level server problems with the provider that weren't helping! Thanks for all the help

OK it has now booted Unfortunately I can't seem to connect to it though, even by using its IP address

When is the flash drive safe to remove? Not sure how to start a safe power down

Couple of pictures of the screen coming from the unRAID box:

Hi all, hoping I've missed something stupid here, not sure what to do unfortunately. I have just finished moving my Microserver from my family home to my flat. At home it was working fine, and I could power down and reboot no problems. I've got it connected up here, but going to 'http://tower' didn't work. So I tried typing the IP address it used to be, which also didn't work, either in the browser or through putty. So, I plugged in a VGA cable to run ifconfig and get the IP address, but there was no login prompt like I expected to see. I could see that packages had finished installing, and then there is a message sitting at the bottom of the screen saying: 'warning: commands will be executed using /bin/sh' And no commands seem to do anything at all. I can't even work out a way to power it down, CTRL-ALT-DELETE does work to reboot it though. So does anyone have a suggestion for what to do when there isn't even a login prompt? The troubleshooting page doesn't seem to mention that possibility, and a quick search on here came up with nothing EDIT: Sorry, forgot to mention I'm running 4.7. And I'm still using the same Switch, which is connected to the same computers as before, just a new internet connection feeding it all. I would attach a syslog but without being able to log in I don't know how

Hi all, I'm approaching my first unRAID system, as I finally have almost all the components. As it's a first time I'm starting simple with a HP Microserver, and am after some advice on transferring my existing data to the array once all is up and running. At the moment, I have two 2TB external HDDS full of data that I would like to have stored on the NAS ultimately. I also have an empty 2TB drive and an empty 1TB drive (As well as the 250GB drive that coms with the Microserver, but as it is such a small amount I'm not really factoring it into my plans). From my understanding so far, my plan is the to preclear and add the empty spare drives first, choosing neither as parity initially. I can then copy one of the external drives contents to the array, add the now empty drive, and repeat with the 2nd external, before finally assigning the last added 2TB drive as parity, with the other two 2TBs and the 1TB acting as data storage. My question (hoping I have not made any stupid assumptions so far) is what the best way to transfer nearly 4TB of data will be? Attach the drives as USB? Copy over the network from Windows? Or is there some way I can mount them without preclearing just to copy the data off them, and then proceed with the preclear etc? I hope I've not said anything too stupid, although I'm sure I'll have made some mistakes somewhere! And please go easy on the newbie if so - there's only so much I can be 100% confident of from reading without having a system to play around with, and once I do have the system to play around with I want to have it up and running as soon as possible, not making silly mistakes early on. Thanks!

Of course it's with the lid on, otherwise it would have said "the drive temps are insane!11!!! I have to run it with the lid off!!!111!!!". It doesn't. Alright, well I'm new to all this and I thought that running it with the lid off might be an obvious thing to do when an extra 2 or 3 drives are crammed in than there should be. I am grateful for all the help I've been given, I'm just trying to get a decent footing in all this without wasting any money