ibasaw

Members
  • Posts

    136
  • Joined

  • Last visited

Everything posted by ibasaw

  1. hi, i have windows11 on my desktop computer on a ssd. There are many partitions and it's boot ok. My computer boot with UEFI and the MBR of windows11 on C drive partition. i had already try to convert this physical disk to a raw image with linux dd, after that i had convert to .qcow2 image, create a new template on unraid VM section i had spent many many hours to try/test this conversion. https://unraid.net/wiki/index.php/UnRAID_6/VM_Management#Physical_to_Virtual_Machine_Conversion => broken link But when i start the vm, windows is broken, it failed to boot, and failed to be repared, try all options recover with windows without success. How to convert my physical disk to a VM raw (qcow2) image ? ++ simply go to uefi bios into the VM, select windows boot manager and go on ....
  2. @sekator just login again to your plex pass account, then come back to the dashboard
  3. [solved] it was a login issue... hi binhex/arch-plex:latest i got an error since few days 16/02/202413:14:07 2024-02-16 08:14:07,918 INFO success: plexmediaserver entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 16/02/202413:14:22 2024-02-16 08:14:22,291 DEBG 'plexmediaserver' stdout output: 16/02/202413:14:22 Critical: libusb_init failed the homepage is not loading => infinite loader ++
  4. hi, i try to use my lsi card into my desktop, but it seem not to be reconized by bios, not see in post bios, unraid did not find the card with the command lspci i had already try to swith the card to another pci express port what is wrong ? ++
  5. i had bought a new setup, waiting for it. I hope it will be fonctionnal.
  6. i think i can buy this product https://www.amazon.com/Internal-3-3ft-SFF-8087-4xSATA-Transmission/dp/B088H2QLBQ/ref=sr_1_15?crid=65WETASXCB3N&keywords=SAS%2B8087&qid=1694856612&sprefix=sas%2B8087%2Caps%2C234&sr=8-15&th=1 if i buy 2 of this, i could wire 8 drives. is that correct to say if i plug only my "datas" drive on theses cable to my LSI 9210-8I, and my 2 partity drives and the cache drive to the motherboard itself, is my unraid build will reconize my all disk and datas ? i really need to access again to my datas. ++
  7. hi, i got LSI 9210-8I (IT MODE) with 10 drives 3.5 HDD, my datas are on the raid. i got 2 drives for partiy, one ssd for cache, and 6 drives for datas + 1 spare drive for vm. i need to buy new harware but i don't know wich one. My old SuperMicro 846E16-R1200B W/ X9DRI-F 24 died ! i would like to stay below 1000 € if possible. i would like to have an ATX tower, to put inside my LSI 9210-8I and 10 drives + 1 nvidia GTX 1070 card. how to connect 10 drives as SAS with the LSI 9210-8I (IT MODE) on a motherboard ? best regards
  8. same here, i don't see the goal of zfs for unraid !?
  9. hi, In this section, i can't find the support thread in https://forums.unraid.net/forum/47-docker-containers/ ++
  10. my issue with scan is resolved, i change the agent for music, and he finally get it, but how to solve the libusb_init failed ?
  11. hi i can't update some music files since a few days, i don't know if this is related to this https://forums.plex.tv/t/stopped-adding-new-files/836924/37 it works with jellyfin, so this is not my files, my naming strategy is the same as others albums, my tags are good in plex server, theses directories are "empty" !? i got this in the console 2023-04-27 19:36:03,413 DEBG 'plexmediaserver' stdout output: Critical: libusb_init failed
  12. i had dump the vbios and now its working fine !
  13. hi when i want to restart my windows vm, it does not work, it stay on black screen after reset. icon is green, it said it's started, but it's not ! i had passthrought my GTX 1070. i got 2 graphic card on the server, gtx is on primary AGP port. no override. this is really boring to reset the server only to restart windows ? How to avoid this, how to restart a VM without restart the whole server ? +++
  14. hi, all is fine, thank you for this new release
  15. i had delete r8129 blacklist and now it is working !
  16. i had modified pci slot to GEN 2 and now the card is listed by unraid IOMMU group 26:[10ec:8125] 06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller (rev 04) how to use now this new card ?
  17. i don't know, i had looked for it in the bios, i can't see pci device listed.
  18. hi, i bought a new card icybox IB-LAN300-PCI and it does not reconized by unraid 6.10-rc5 Chipset Realtek RTL8125B this is RealTek RTL8125 2.5Gigabit Ethernet controllers with PCI-Express interface https://icybox.de/en/product.php?id=464 how to enable this pci card under unraid ? i already tried to block r8169, not working. ++ the-beast-diagnostics-20220429-1522.zip
  19. i had switched to testdasi/pihole-dot-doh:latest to make it work again ...
  20. hi since few days, here what i got in the logs, and the admin page is not responding Please ensure that the container has the required capabilities. [cont-init.d] 20-start.sh: exited 1. [cont-finish.d] executing container finish scripts... [cont-finish.d] done. [s6-finish] waiting for services. [s6-finish] sending all processes the TERM signal. [s6-finish] sending all processes the KILL signal and exiting. [s6-init] making user provided files available at /var/run/s6/etc...exited 0. [s6-init] ensuring user provided files have correct perms...exited 0. [fix-attrs.d] applying ownership & permissions fixes... [fix-attrs.d] 01-resolver-resolv: applying... [fix-attrs.d] 01-resolver-resolv: exited 0. [fix-attrs.d] done. [cont-init.d] executing container initialization scripts... [cont-init.d] 05-changer-uid-gid.sh: executing... [cont-init.d] 05-changer-uid-gid.sh: exited 0. [cont-init.d] 20-start.sh: executing... ::: Starting docker specific checks & setup for docker pihole/pihole WARNING: Unable to set capabilities for pihole-FTL. Please ensure that the container has the required capabilities. [cont-init.d] 20-start.sh: exited 1. [cont-finish.d] executing container finish scripts... [cont-finish.d] done. [s6-finish] waiting for services. [s6-finish] sending all processes the TERM signal. [s6-finish] sending all processes the KILL signal and exiting. ++
  21. i try under linux and got 116 MO/S so i uninstall the driver, delete the network adaptateur and after fresh install of the network card with default configuration, i can transfer file to 116MO/s problem solved! ++
  22. hi, unraid Version: 6.9.2 cat cable 6 netgear gs108 I use eth0 on static ip eth0 1000 Mbps, full duplex, mtu 1500 I got very slow transfer speed between my unraid server and windows 10 When i want to copy a file from unrraid to my C ssd drive, i only got 10MO/S, but i only got 1gigabit card. Here my iperf logs: root@THE-BEAST:~# iperf3 -s ----------------------------------------------------------- Server listening on 5201 ----------------------------------------------------------- Accepted connection from 192.168.1.20, port 5086 [ 5] local 192.168.1.11 port 5201 connected to 192.168.1.20 port 5087 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 11.3 MBytes 94.6 Mbits/sec [ 5] 1.00-2.00 sec 11.3 MBytes 94.9 Mbits/sec [ 5] 2.00-3.00 sec 11.3 MBytes 94.8 Mbits/sec [ 5] 3.00-4.00 sec 11.2 MBytes 93.7 Mbits/sec [ 5] 4.00-5.00 sec 11.3 MBytes 94.9 Mbits/sec [ 5] 5.00-6.00 sec 11.3 MBytes 94.8 Mbits/sec [ 5] 6.00-7.00 sec 11.3 MBytes 94.9 Mbits/sec [ 5] 7.00-8.00 sec 11.3 MBytes 94.9 Mbits/sec [ 5] 8.00-9.00 sec 11.3 MBytes 94.9 Mbits/sec [ 5] 9.00-10.00 sec 11.3 MBytes 94.8 Mbits/sec [ 5] 10.00-10.03 sec 344 KBytes 94.9 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.03 sec 113 MBytes 94.7 Mbits/sec receiver ----------------------------------------------------------- Server listening on 5201 why this is so slow ? ++ the-beast-diagnostics-20211229-1114.zip
  23. wait and see, for 10 bit, i use on windows staxrip, but i prefer handbrake gui interface
  24. Do you know how to keep 10 bit HDR with this encoder => NVENC x265 with handbrake ? i test to re encode a video with 10 bit HDR, after converion i don't have the same media info profile, i loose 10 bit => 8 bit https://4kmedia.org/samsung-wonderland-two-hdr-uhd-4k-demo/ I don't know how to do this => [email protected] high with NVENC ?