Meller

I did try that also. I just wanted to post the chkdsk to keep things updated on the thread as I did them. I find it easier to keep good documentation if I report as it as I do it with result. The USB port, I've swapped it from one of the front I/O ports on my chassis to one of the back USB ports directly from the motherboard. Sorry if my responses seemed spammy.

C:\Windows\system32>chkdsk 😧 The type of the file system is FAT32. Volume UNRAID created 7/20/2017 8:38 AM Volume Serial Number is 272B-4CE1 Windows is verifying files and folders... File and folder verification is complete. Windows has scanned the file system and found no problems. No further action is required. 4,018,659,328 bytes total disk space. 196,608 bytes in 3 hidden files. 122,880 bytes in 30 folders. 180,465,664 bytes in 136 files. 3,837,870,080 bytes available on disk. 4,096 bytes in each allocation unit. 981,118 total allocation units on disk. 936,980 allocation units available on disk. So came back with no errors when I ran chkdsk on my pc.

Will do! Thank you very much!

This is happening daily. Basically, my unraid is set to the dark theme, with a handful of dockers installed (Plex, sonarr, radarr, ombi, jackett). Once a day, I go to my unraid dashboard and the theme is completely white. I have a banner saying system notifications have been disabled (i'm unable to reenable at this point unless i restart my whole server). My docker tab completely disappears. I'm unable to stop the array. If I go to tools > Registration, some times it'll say invalid registration, other times it'll have all of my info there. If i go to Update OS, it says my current version is unknown. I recently backed up my entire unraid drive. Formatted the drive and reinstalled unraid, then copied over my share's .cfg files and my super.dat file. Since this, this issue has started happening. The only way to fix it is to do a completely system restart. But I can't even complete a full parity check before this happens at least once within a 24 hour period. tower-diagnostics-20180910-1534.zip

Is anyone else having an issue where once a torrent finishes downloading, it stays in the downloading state @ 100%? The only way to get it to move to seeding is to force a recheck on the file. Any idea's what could cause it or a solution to fixing it?

I recently installed my first parity drive, and since then I'm getting some slow speeds when I pull large files off my unraid server when I move them to a new folder on the server. Parity: 8TB Drive Drive 1: 250GB Drive 2: 2TB Drive 3, 4, 5 and 6: 8TB Drives. My speeds my start out at like 100-110MB/s but will drop down to (on averag) 5MB/sec. Sometimes dropping completely down to 0Bytes and sitting there for a second or two before going back up to 5MB/sec. It will randomly climb back up to 100MB/s, stay there for a few seconds, then fall back down to 5MB/sec. This happens when I use FileZilla to pull files off the server, Windows Explorer to pull files off, put them on or move them to a different folder. Any idea? Or how do I go about trouble shooting this to figure out why they are moving so slow?

So I didn't get it on my Fedora set up, but I went a head and just bought it on Windows 10. Works flawless for everything that the docker couldn't.

Let me set it up and figure out how to get it on Fedora. I'm very, very new to Linux. Thanks for the replies by the way. I do appreciate your help. Even if we find out it's not filebot it's self... I'm just glad to be figuring out how to troubleshoot it.

Unfortunately, my unraid server is my only linux system. I could install a Fedora 28 VM if that would work.

I have 32GB total. 16GB per CPU. I have 12 empty dimms still in my server. Perhaps once I upgrade from E5-2665's to a couple of 2695v2's or something, I'll fully populate to 128GB for VM purposes. But for right now, 32GB does me plenty for plex, file storage, and other misc jobs.

Ah ok, same page now. No. Let's say Saturday Night Live Season 30 doesn't work. If I restart the docker, it will do the exact same thing for Season 30.

Thanks guys! I always scared to try new things without asking first. But it did the job. Appreciate your help as always.

I don't have a parity. But I will after today. Just been waiting for the drive to come in. I mean, I installed the drive into my chassis. Booted up unraid. Assigned the drive to Disk 4 (as that was the next open spot). Started my array. Then clicked format so unraid could format the brand new drive in the array. But when it goes to format, it fails due to errors on the drive it's self. No I did not preclear. I thought I read some where that preclear was dead now? If I do new config without a parity, will I lose any data on my other drives?

I plugged a hard drive that I though was unformatted into my unraid server. Once I added it as Disk 4 to my unraid server, I then tried to format it so unraid could use it. Long story short. The drive isn't any good. It's never had any data written to it because I was never able to format it in unraid. But if I can't remove it or else my array won't start. So how do I remove this unmountable, never been used HDD from my array? It literally has 0 data on it, it's never been actually used by unraid due to the fact that I can't format it.

No, I mean the files work. i can play them in multiple players. So when it kicks out the error "Failed to read audio language: Failed to open file, I can still open the files. I can do an entire show, and the next show gives me errors. Or I can do Season 1 of said show, but then Season 2 gives me the error and gray box. Sorry for the confusion.

So it just did it again with Being Human (US) except I had the log open as I was doing it, and it didn't kick out anything at all... just went grey screen on me as in my picture above.

Nevermind, I'm an idiot. There are a ton of these warnings for the most recent show I tried that it didn't work on Failed to read audio language: Failed to open media file: Files definitely work, as I nagivated to them and tested them. They are dual audio files.. all 900 of them and half of them it had no warning, and the other half it kicked out that warning. So idk.

Cool, thank you!

It's random. It doesn't do it all the time. Some shows/movies it works, other times it does the above. Stupid question, but where is the container log and how do I go about getting it for you?

Any idea why it would do this (see attached picture). It happens after I click auto detect. I can move the box around and max/min it, but I can't close it and it just sits at the screen until I restart the whole docker.

So, I have 8.14TB of free space. Though two of my drives are at like 99% full (I just added a new 8TB drive today to my pool). But the docker service all of a sudden won't start. It was working, then I notice two of my dockers stopped and wouldn't restart (were kicking out Error Code 403). I restarted my server, and now the entire docker service won't start. Below is my diagnostic log. Also ignore disk 4. It's a bad disk. I added it to my drive, but I haven't been able to format it. As soon as I get a parity disk added to my pool, I'm going to replace it with a valid drive. So just ignore that drive if you see it in the log. There is literally 0 data on it. I just can't remove it without my array not wanting to start. tower-diagnostics-20180521-1627.zip

When I add files to my watch folder, outside of just checking the completed folder and see when they are removed from the watch folder, is there a way to use the WebUI to see the current status of the current file it's working on? I know it's working as my I see my CPU usage go up, and I can see it working on stuff in the completed folder. I'd just like to be able to see more like % done and what not. How do I view current activity when it's working on files from the watch folder? Thanks!

Thanks! Appreciate your help, sir.

So right now, I'm on my trial. I'm going to be buying my key basically as soon as I get my answer/clarification to this. If I want to put everything on a different USB stick... I simply copy everything from my current stick to my new stick. Launch my server, then purchase my new key. I'll have all of my same configurations, etc. I'm assuming this would be the best/easiest method for moving to a new USB stick. (Move first, then purchase my full license key). Am I missing any steps?

It's just continuously "timing out" over and over and over. If I restart my entire unraid server, it'll work no problem until I start a new download. Then it just goes on this "timing out" thing again.