cbr600ds2

Perhaps the description should be reworded to indicate that this is plex only. I was hoping to try this out but I guess I'm out.

These are set (sort of) how I want it to be set up. Is there a way to delete all those other shares that you see?

Actually I'm looking at it via the terminal built in Unraid and those are totally different files. I'm actually trying to delete the folders but I can't find it anywhere. the /mnt/user seems to be my cache drive and that part of the SAB is working properly. I have it download to a completed folder that is on the cache drive. Then FB will do its thing and move it to a TBC folder to be converted by Handbrake....

Thanks! I'm not... liking Radarr. It seems like my settings are correct (I just want to download movies but this is what I get *sigh*

Ok - so this shows all the shares (typically) but I have no idea what I did yesterday where the last two movies are showing up in the file explorer I don't see as a newly created share nor does anything seem wrong. Its showing up in the Movies share as per normal. I'm just wondering why its showing up here now. i've included diagnositcs. skynet-diagnostics-20201220-1528.zip

So I use this to download asian shows that I need to reseed... I've got it downloading to an unassigned devices share right now but I was wondering - if I have it download to a share...any pros/cons to this idea? I like that its protected vs. unassigned devices just in case that fails.

hahaha Thanks WG! It's working so I'm not going to trip about it. One last weird question - if the movie is "monitored" it still seems like I have to go in to it and click on the glasses to search for it. What setting am I missing to do this ish automatically?

Hello - I was wondering why it was not finding my current movie share. It wants to look in /media/movie name and I have the following set up as Is it weird? Like it doesn't see all of the current movies that I have in the share. I had figured that /media/ would signal to Radarr to look in the /mnt/user/Movies folder...*shrug* I'm just curious is all.

Thanks@JorgeB. Happy Thanksgiving! Sent from my LM-V405 using Tapatalk

so its attached to a Supermicro 847 chassis with an BPN-SAS2-846EL1 attached to an LSI 9207-8i and showing up on unassigned devices. All of the other SATA hard drives are working while on it. Everything I've read says I can run a SAS HD. You don't think so? That's....a bummer.

smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.19.107-Unraid] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: HITACHI Product: H7230AS60SUN3.0T Revision: A310 Compliance: SPC-4 Rotation Rate: 7200 rpm Form Factor: 3.5 inches Logical Unit id: 0x5000cca01a8c89a0 Serial number: 001216RH90DD YHJH90DD Device type: disk Transport protocol: SAS (SPL-3) Local Time is: Wed Nov 25 16:34:38 2020 EST device is NOT READY (e.g. spun down, busy) A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. root@Skynet:~# smartctl --test=short /dev/sds smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.19.107-Unraid] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org Short offline self test failed [device not ready]

Had to run the manual long test via CLI because it failed through GUI. Hopefully it'll have something by tonight. @slobert - yeah same it was a cheapo from Ebay because I wanted to test how the system works w/a SAS drive.

skynet-diagnostics-20201124-1513.zip

Saw this after I started a new post or before. Anyways.

@BeaverTerror @Robert. Just ran in to this. Did you guys get any answers or did you just give up?

Hello - I couldn't find anything about this error - Oct 22 14:43:02 Skynet kernel: ahci 0000:03:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst Nov 23 08:59:45 Skynet kernel: sd 3:0:19:0: [sds] Spinning up disk... Nov 23 09:00:56 Skynet kernel: sd 3:0:19:0: [sds] Read Capacity(16) failed: Result: hostbyte=0x01 driverbyte=0x00 Nov 23 09:00:56 Skynet kernel: sd 3:0:19:0: [sds] Sense not available. Nov 23 09:00:56 Skynet kernel: sd 3:0:19:0: [sds] Read Capacity(10) failed: Result: hostbyte=0x01 driverbyte=0x00 Nov 23 09:00:56 Skynet kernel: sd 3:0:19:0: [sds] Sense not available. Nov 23 09:00:56 Skynet kernel: sd 3:0:19:0: [sds] 0 512-byte logical blocks: (0 B/0 B) Nov 23 09:00:56 Skynet kernel: sd 3:0:19:0: [sds] 0-byte physical blocks Nov 23 09:00:56 Skynet kernel: sd 3:0:19:0: [sds] Write Protect is off Nov 23 09:00:56 Skynet kernel: sd 3:0:19:0: [sds] Mode Sense: 00 00 00 00 Nov 23 09:00:56 Skynet kernel: sd 3:0:19:0: [sds] Asking for cache data failed Nov 23 09:00:56 Skynet kernel: sd 3:0:19:0: [sds] Assuming drive cache: write through Nov 23 09:00:56 Skynet kernel: sd 3:0:19:0: [sds] Read Capacity(16) failed: Result: hostbyte=0x01 driverbyte=0x00 Nov 23 09:00:56 Skynet kernel: sd 3:0:19:0: [sds] Sense not available. Nov 23 09:00:56 Skynet kernel: sd 3:0:19:0: [sds] Read Capacity(10) failed: Result: hostbyte=0x01 driverbyte=0x00 Nov 23 09:00:56 Skynet kernel: sd 3:0:19:0: [sds] Sense not available. Nov 23 09:00:56 Skynet kernel: sd 3:0:19:0: [sds] Attached SCSI disk Nov 23 09:01:05 Skynet kernel: sd 3:0:20:0: [sds] Spinning up disk... Nov 23 09:03:03 Skynet kernel: sd 3:0:20:0: [sds] Read Capacity(16) failed: Result: hostbyte=0x00 driverbyte=0x08 Nov 23 09:03:03 Skynet kernel: sd 3:0:20:0: [sds] Sense Key : 0x2 [current] [descriptor] Nov 23 09:03:03 Skynet kernel: sd 3:0:20:0: [sds] ASC=0x4 ASCQ=0x2 Nov 23 09:03:03 Skynet kernel: sd 3:0:20:0: [sds] Read Capacity(10) failed: Result: hostbyte=0x00 driverbyte=0x08 Nov 23 09:03:03 Skynet kernel: sd 3:0:20:0: [sds] Sense Key : 0x2 [current] [descriptor] Nov 23 09:03:03 Skynet kernel: sd 3:0:20:0: [sds] ASC=0x4 ASCQ=0x2 Nov 23 09:03:03 Skynet kernel: sd 3:0:20:0: [sds] 0 512-byte logical blocks: (0 B/0 B) Nov 23 09:03:03 Skynet kernel: sd 3:0:20:0: [sds] 0-byte physical blocks Nov 23 09:03:03 Skynet kernel: sd 3:0:20:0: [sds] Write Protect is off Nov 23 09:03:03 Skynet kernel: sd 3:0:20:0: [sds] Mode Sense: e7 00 10 08 Nov 23 09:03:03 Skynet kernel: sd 3:0:20:0: [sds] Write cache: disabled, read cache: enabled, supports DPO and FUA Nov 23 09:03:03 Skynet kernel: sd 3:0:20:0: [sds] Spinning up disk... Nov 23 09:04:43 Skynet kernel: sd 3:0:20:0: [sds] Read Capacity(16) failed: Result: hostbyte=0x00 driverbyte=0x08 Nov 23 09:04:43 Skynet kernel: sd 3:0:20:0: [sds] Sense Key : 0x2 [current] [descriptor] Nov 23 09:04:43 Skynet kernel: sd 3:0:20:0: [sds] ASC=0x4 ASCQ=0x2 Nov 23 09:04:43 Skynet kernel: sd 3:0:20:0: [sds] Read Capacity(10) failed: Result: hostbyte=0x00 driverbyte=0x08 Nov 23 09:04:43 Skynet kernel: sd 3:0:20:0: [sds] Sense Key : 0x2 [current] [descriptor] Nov 23 09:04:43 Skynet kernel: sd 3:0:20:0: [sds] ASC=0x4 ASCQ=0x2 Nov 23 09:04:43 Skynet kernel: sd 3:0:20:0: [sds] Attached SCSI disk Nov 23 13:07:22 Skynet kernel: sd 3:0:21:0: [sds] Spinning up disk... Nov 23 13:09:13 Skynet kernel: sd 3:0:21:0: [sds] Read Capacity(16) failed: Result: hostbyte=0x00 driverbyte=0x08 Nov 23 13:09:13 Skynet kernel: sd 3:0:21:0: [sds] Sense Key : 0x2 [current] [descriptor] Nov 23 13:09:13 Skynet kernel: sd 3:0:21:0: [sds] ASC=0x4 ASCQ=0x2 Nov 23 13:09:13 Skynet kernel: sd 3:0:21:0: [sds] Read Capacity(10) failed: Result: hostbyte=0x00 driverbyte=0x08 Nov 23 13:09:13 Skynet kernel: sd 3:0:21:0: [sds] Sense Key : 0x2 [current] [descriptor] Nov 23 13:09:13 Skynet kernel: sd 3:0:21:0: [sds] ASC=0x4 ASCQ=0x2 Nov 23 13:09:13 Skynet kernel: sd 3:0:21:0: [sds] 0 512-byte logical blocks: (0 B/0 B) Nov 23 13:09:13 Skynet kernel: sd 3:0:21:0: [sds] 0-byte physical blocks Nov 23 13:09:13 Skynet kernel: sd 3:0:21:0: [sds] Write Protect is off Nov 23 13:09:13 Skynet kernel: sd 3:0:21:0: [sds] Mode Sense: e7 00 10 08 Nov 23 13:09:13 Skynet kernel: sd 3:0:21:0: [sds] Write cache: disabled, read cache: enabled, supports DPO and FUA Nov 23 13:09:13 Skynet kernel: sd 3:0:21:0: [sds] Spinning up disk... Nov 23 13:10:54 Skynet kernel: sd 3:0:21:0: [sds] Read Capacity(16) failed: Result: hostbyte=0x00 driverbyte=0x08 Nov 23 13:10:54 Skynet kernel: sd 3:0:21:0: [sds] Sense Key : 0x2 [current] [descriptor] Nov 23 13:10:54 Skynet kernel: sd 3:0:21:0: [sds] ASC=0x4 ASCQ=0x2 Nov 23 13:10:54 Skynet kernel: sd 3:0:21:0: [sds] Read Capacity(10) failed: Result: hostbyte=0x00 driverbyte=0x08 Nov 23 13:10:54 Skynet kernel: sd 3:0:21:0: [sds] Sense Key : 0x2 [current] [descriptor] Nov 23 13:10:54 Skynet kernel: sd 3:0:21:0: [sds] ASC=0x4 ASCQ=0x2 Nov 23 13:10:54 Skynet kernel: sd 3:0:21:0: [sds] Attached SCSI disk The logical blocks is ok according to what I read but because the read capacity failed - does that mean I can do a manual format via terminal in order to get preclear to show up on the UI or does that mean I got a bad one. Thoughts?

Hello - still using 6.8.3. Weirdly just the other day the docker section in dashboard is taking a bit longer time to load than normal vs. other things. Also if you go in to the docker tab it says not available but if I run a speedtest its saying that I'm getting 1G download and 1G upload to the net so that's weird. Dockers still work but a bit slow to get to gui's. Thoughts?

If I manually specify a user share it will create the temp folders, client folders in that share? I'm trying to keep my root share as "clean" as possible w/ just like backups, TV, Movies. It seems like it would work in my head and wanted to throw it out here before I try it this weekend...or next weekend.

Where do I find yours? Sent from my LM-V405 using Tapatalk

This isn't the docker that's created by coolasice, right? T

Ok...ill try this weekend. I've been running it from my laptop but I may try the container this weekend. Hopefully it doesn't take a ton of space Sent from my LM-V405 using Tapatalk

Now that TMM has went to a pay structure did that have an effect on the container? Sent from my LM-V405 using Tapatalk

Thanks Frank... I'll check it out but it shows up on windows explorer network but when you double click to get to see the shares then it gives me the error that it can't be found which I think is a bit weird. I'll try these this week. I thought it was the Samba 1 setting but that didn't fix. *shrug*

I don't have the setting AllowInnsecureGuestAuth. It won't break if I manually add it in or... I don't want to change to much because it works fine from my laptop. I just want to be able to do stuff on my new desktop. Is it because this version of Windows isn't registered (yet?)

I am still on Unraid 6.8.3 I just added a new unassigned disk - precleared no problem (first time I used JoeL's script, normally I use gfjardim when preclearing). Now I went to delete the partition so it'll format the disk but after typing Yes I'm getting a failed operation and its not doing it. Can I use the CLI to force a format to XFS to move it to the next step to be an unassigned device? I wonder if its an issue w/ UD and if I should uninstall and reinstall? I"ve tried rebooting a few times still no luck. If I uninstall and reinstall it won't delete the stuff from the other UD Drive will it?