Dartanis

Members
  • Posts

    8
  • Joined

  • Last visited

Dartanis's Achievements

Noob

Noob (1/14)

0

Reputation

  1. The drives themselves held 0 data so wasn't worried about recovering them. Was just wondering if there was a way around the disabled aside from the full rebuild since didn't want to wait for 16 hours to find out it was still disabled for some other reason. Thank you for the links, I have begun the rebuild after re-adding the drives after removing them from the pool.
  2. Posting logs though this is after a fresh reboot so might not be helpful, performed the reboot to make sure there wasn't some cabling issue. Not sure if the logs show disk names but currently having issues with Disk 9 (sde - 7G52) and Disk 7 (sdi - 3ZE6). Was spinning up all disks for a parity check when Disk 9 didn't come back online, was reporting disabled so tinkered a bit trying to get it back up. After a disk swapping around Disk 7 is now also showing the same thing. Both showed Unmountable: not mounted and seemed to have corrupted their file systems (no data on them, was spun down the past few weeks) so let it re-format to see if that resolved the error but now they can see their disk usage and file system but still can't be brought back from Disabled status. Looked around for similar issues but mostly found either errors from the disk causing the issue. No data on these disks so wiping/rebuilding would be fine too if that's what's necessary since I was going to run a parity check today anyways. plant-diagnostics-20210313-1222.zip
  3. Hey wasn't able to find anything my issue in this thread or in general elsewhere, Radarr works perfectly fine for me but Sonarr isn't able to search for any shows. An error I'm commonly seeing pop up that I feel is likely related in logs is "Site responded with browser content instead of api data." but haven't been able to figure out what's causing it. 🤔
  4. Nothing important lived on the cache drives, how exactly do I go about making sure the cache is set to RAID0 and reformatting it? Not sure where I'm supposed to initiate this action from.
  5. Attached diagnostics pantheon-diagnostics-20181124-0105.zip
  6. Hi there, Read that it was possible to transition my 2 SSDs from a RAID1 config to a RAID0 and thought it fit my use cases as just a temp holding location a lot more since I have Mover run hourly anyways. Used "-dconvert=raid0 -mconvert=raid1" in the Balance field of my cache window, saw it going to work and thought great, now I'll have a 500GB cache instead of mirrored 250GB. Saw the value not change for total space in cache but looked at the btrfs filesystem df which listed: Data, RAID1: total=2.00GiB, used=1.99GiB Data, RAID0: total=18.00GiB, used=3.86GiB System, RAID1: total=32.00MiB, used=16.00KiB Metadata, RAID1: total=1.00GiB, used=322.72MiB GlobalReserve, single: total=19.66MiB, used=64.00KiB So I thought it had created a bit of both, rebooted the server and saw the value had not changed; despite being a very bad idea in retrospect I tried spinning down the typically mirror drive and seeing how the cache behaved. At this point a user for my Plex server informed me they lost connection. I tried it on my local network, server reports offline, try to access webgui through ip:32400, refused despite still being forwarded. Checked my nextcloud docker, unable to access it as well, same Refused to Connect error. Annd that is where I am currently stuck, tried reloading the Plex docker but getting the same error, though in bridge mode it seems to time out instead of giving me the error. I decided it would be best to remove my cache drives from the pool, reboot and then re-add after running -dconvert=raid1 -mconvert=raid1 to try and revert my changes. But the filesystem df still shows the RAID0 data on there too. So this is the point where I am stuck now, basically trying to reset my cache and forcibly reloading my appdata but unsure of how to proceed with it
  7. Ah was in the process of fiddling with dockers and some settings at the time, would explain the time of the error. Thanks for the help!
  8. FCP suggested I post this on the forums so doing just that, hoping someone can help me identify the problem. Attached is the diagnostics for the server. pantheon-diagnostics-20180722-2253.zip