casperse

Members
  • Posts

    800
  • Joined

  • Last visited

Posts posted by casperse

  1. Ok so I just tried my other IP on my Unraid server (have a backup) and then it just worked? (Bridge is enabled!)

    How can this be? what sets the priority of my IP's for the Unraid server?

     

    Have I configured the network wrong?

    Primary IP (Should be) 192.168.0.6

    image.thumb.png.b4476f23cbb69ceee2c451b96e8183ab.png

     

    Is it a bug? running 6.8 - rc3

     

    Secondary IP: 192.168.0.13 <---- Wireguard connects to this one?

    image.thumb.png.1251c592531d507d4dbd1bd16e81b1a6.png

  2. 17 hours ago, casperse said:

    Hi All

     

    I don't seem to see the option to change  the "local tunnel network pool" anymore in Advanced view

    Also tried to delete the plugin and install it again, nut the last update made i vanish from my plugin list maybee by design?

    Should I delete the config folder on the flash drive to get back to "start"?

     

    UPDATE: Delete the folder rebooted the server, did the configuration again - found that Local tunnel was in the Peer name (Sorry)

     

    I am now connected but no handshake?

    Added the port and also the static route, and I see some activity so what could I be missing?

     

    image.png.7c86b1f28985c2968c295575249acd35.png

     

    image.thumb.png.5f982150db407dfc9f9d5c4f0bc46ce0.png

     

    Any suggestions I have read through the post and I can't see anything wrong...

    I am only testing by phone app. Also tried to change tunnel to LAN but I still get no handshake? (Logfile on device says no to handshake)

    Regards

    Casperse

     

    Unifi settings:

    image.png.79bf2477bf6c075ff5be1840a51a18f7.png

    Port forwarding: 

    image.png.77c96e06d6188c0b52e8c3475478cc15.png

  3. Hi All

     

    I don't seem to see the option to change  the "local tunnel network pool" anymore in Advanced view

    Also tried to delete the plugin and install it again, nut the last update made i vanish from my plugin list maybee by design?

    Should I delete the config folder on the flash drive to get back to "start"?

     

    UPDATE: Delete the folder rebooted the server, did the configuration again - found that Local tunnel was in the Peer name (Sorry)

     

    I am now connected but no handshake?

    Added the port and also the static route, and I see some activity so what could I be missing?

     

    image.png.7c86b1f28985c2968c295575249acd35.png

     

    image.thumb.png.5f982150db407dfc9f9d5c4f0bc46ce0.png

     

  4. On 10/10/2019 at 8:38 AM, casperse said:

    Help setting up dual network in Plex docker?

     

    I have managed to setup the ethernet like this:

     

    image.thumb.png.55e812349a0d56d19ca621cc2ec01a3c.png

     

    And this:

    image.thumb.png.fb61702354496e2edfc92884cf708a05.png

     

    But how to add this to Plex in Docker (Sofar I have been unsuccessful)

     

    I use "host" which just uses the first lan group, changing it to "Custom: br0" doesn't seem to work

    Do I have to add it manually?

     

    As always your input and help is much appreciated

    Reason to do this: I want to setup different gateways to different internet connections

    And I think I saw Plex being able to have multiple network connection in the ui

    Any input on how to add all networks to Plex (Multiple access?)

    I think I had this when it was running on my Syn NAS....

     

  5. 11 hours ago, binhex said:

    not sure what you mean by this, thats an host ip address not a network, what exactly have you changed?

     

    please dont do this, its set to bridge for a reason.

    Hi @binhex

    I just found by accident that if I used my secondary IP on my Unraid server then Krusader works? (Bridge as standard)

    But for some reason when going to my Unraid UI and to the docker for Krusader and select launch "WebUI" it did not open anymore (Got above VPN error)

    but if I manually changed the "WebUI" to my other IP 0.6 -->0.13 then it worked (Still in bridge mode)

    (UPDATE: I just tested this again same machine and now it works on both IP's ???  - Sorry I haven't changed anything so maybe a glitch in my network?)

     

    Thanks for all of your work this is a great docker couldn't live without it - All servers need a filemanager

    • Like 1
  6. I just got this after starting Krusader

    image.png.3a4af08b00e97d257f06675ff782deda.png

    No changes to my configuration, auto update is enabled...

    Any breaking changes that I need to update my configuration with?

    As always your help is much appreciated Thanks! 

     

    UPDATE:

    I found that if I changed my network to 192.168.0.13 it works?

    I then tried to change network from Bridge to Host and then it didn't work on any network?

    This wasn't a problem before 192.168.0.6 is my "primary" host network for Unraid so what can cause this?

     

    diagnostics-20191014-0900.zip

  7. Help setting up dual network in Plex docker?

     

    I have managed to setup the ethernet like this:

     

    image.thumb.png.55e812349a0d56d19ca621cc2ec01a3c.png

     

    And this:

    image.thumb.png.fb61702354496e2edfc92884cf708a05.png

     

    But how to add this to Plex in Docker (Sofar I have been unsuccessful)

     

    I use "host" which just uses the first lan group, changing it to "Custom: br0" doesn't seem to work

    Do I have to add it manually?

     

    As always your input and help is much appreciated

    Reason to do this: I want to setup different gateways to different internet connections

    And I think I saw Plex being able to have multiple network connection in the ui

  8. 6 minutes ago, petecemi said:

    Try this @casperse, it should allow you to telnet in to the NUT port:

    
    telnet 192.168.0.10 3493

    ... if connected try the following commands (USERNAME, PASSWORD, etc) does it respond with OK? like on mine?

    
    telnet 192.168.1.4 3493
    Trying 192.168.1.4...
    Connected to 192.168.1.4.
    Escape character is '^]'.
    USERNAME monuser
    OK
    PASSWORD mypass
    OK
    LIST UPS
    BEGIN LIST UPS
    UPS ups "Description unavailable"
    END LIST UPS
    GET UPSDESC ups
    UPSDESC ups "Unavailable"

    If it returns ERR ACCESS-DENIED or won't let you connect, then it maybe something to do with the "Permitted DiskStation devices" IP address list on the SynologyNAS.

    I did not change any of the usernames or passwords for my config, left everything as default.

    Thats really cool! didn't know that was possible found it used another IP than my primary "bonded" IP with Thrunk?

    Changing the IP and it works! THANKS

  9. Thanks @petecemi I can not see any difference between your setup and mine...

    What passwords are you using for mouser and slaveuser? (Standard ones?)

     

    image.png.9bba17c436fbcd73d73860f185825c7f.png

     

    Status never changes:

    image.thumb.png.c1ecd74df207eef8a9fab0c0695c84b4.png

     

    UPDATE: I found that my Synology was using another IP for the UPS server? not my main "Bond" IP...

    [monuser]
    password = secret
    upsmon master
    [monuser2]
    password = mylittlesecret
    upsmon slave

     

    Looks like its connected now... THANKS for all your help!

     

     

  10. 13 hours ago, petecemi said:

    I did get this working by installing the NUT (Network UPS Tools) plugin as mentioned by @casperse configuring the UPS Mode (Settings > NUT) to be a "Slave" and setting the UPS IP Address to the Synology NAS (no port number required) - I left all other values as default and started the UPS Tools Service.

     

    On the Synology NAS I simply entered the IP Address of the unRAID box in the Permitted DiskStation devices and checked the "Enable network UPS server" in the UPS tab of the Hardware & Power Control Panel.

     

    The NUT plugin displayed all the settings from the UPS and seems to be up and running just fine :)

    Can you share your configuration/Settings I never got this working.....

  11. On 2/11/2019 at 9:11 PM, MowMdown said:

     

    Just go to the docker screen, click at the bottom "add container" click your plex template and change the the name of the container to Plex(iGPU) and then just edit the parameters to the iGPU settings. Now you can have two containers with each gpu hardware transcoding capability.

     

    For some reason this dosent work anymore having two different dockers running?

    1) Plex GPU (Works perfectly with the Nvidia P2000)

    2) *Plex iGPU (But for some reason the iGPU have stopped working all is CPU transcoding)

     

    *I Use this when I have to use the GPU for my VM, stop one start the other one

     

    I saw someone in a different post saying that it was necessary to also define a video device in the docker conf.

    Like this

    image.thumb.png.5c23a2130e3d0db507c1cbedfd4bbe51.png

    with the:

    image.png.37766f3f92dcb64a546d4d8f85ef38a4.png

     

    I still have the same GO changes like before...

    image.png.5421b120611018716d61d792f410276b.png

     

    So have anything else changed? (Some time since I startet the iGPU version up 🙂

     

  12. On 7/26/2019 at 5:26 PM, niwmik said:

    As a test, I changed the path "/movies" from a SMB share to a user share in the radarr docker.  Everything is now working again.  I'll leave it like this and manually move the files over to the SMB share until I can figure out what was going on with the previous error.

     

     

    Hi @niwmikI think we are experiencing the same problem!

     

    What do you mean "user share?" a local share on your Unraid server? (Yes that works) but I like you need to move this to a secondary server

     

    I seem to experiencing same problem after updating it keeps trying to move the file after completion to MY SMB share and the fails:

    Couldn't import movie : Access to the path is denied.

     

    Radarr error log:

    System.UnauthorizedAccessException: Access to the path is denied. ---> System.IO.IOException: Operation not permitted
       --- End of inner exception stack trace ---
      at Interop.ThrowExceptionForIoErrno (Interop+ErrorInfo errorInfo, System.String path, System.Boolean isDirectory, System.Func`2[T,TResult] errorRewriter) [0x00014] in <81342d83acda4c5590ec19c7afdf26b9>:0 
      at Interop.CheckIo (System.Int64 result, System.String path, System.Boolean isDirectory, System.Func`2[T,TResult] errorRewriter) [0x0000a] in <81342d83acda4c5590ec19c7afdf26b9>:0 
      at Interop.CheckIo (System.Int32 result, System.String path, System.Boolean isDirectory, System.Func`2[T,TResult] errorRewriter) [0x00000] in <81342d83acda4c5590ec19c7afdf26b9>:0 
      at System.IO.FileSystem.CopyFile (System.String sourceFullPath, System.String destFullPath, System.Boolean overwrite) [0x00052] in <81342d83acda4c5590ec19c7afdf26b9>:0 
      at System.IO.File.Copy (System.String sourceFileName, System.String destFileName, System.Boolean overwrite) [0x00062] in <81342d83acda4c5590ec19c7afdf26b9>:0 
      at NzbDrone.Common.Disk.DiskProviderBase.CopyFile (System.String source, System.String destination, System.Boolean overwrite) [0x000bc] in C:\projects\radarr-usby1\src\NzbDrone.Common\Disk\DiskProviderBase.cs:205 
      at NzbDrone.Common.Disk.DiskTransferService.TryCopyFileTransactional (System.String sourcePath, System.String targetPath, System.Int64 originalSize) [0x00128] in C:\projects\radarr-usby1\src\NzbDrone.Common\Disk\DiskTransferService.cs:449 
      at NzbDrone.Common.Disk.DiskTransferService.TransferFile (System.String sourcePath, System.String targetPath, NzbDrone.Common.Disk.TransferMode mode, System.Boolean overwrite, NzbDrone.Common.Disk.DiskTransferVerificationMode verificationMode) [0x0033e] in C:\projects\radarr-usby1\src\NzbDrone.Common\Disk\DiskTransferService.cs:276 
      at NzbDrone.Common.Disk.DiskTransferService.TransferFile (System.String sourcePath, System.String targetPath, NzbDrone.Common.Disk.TransferMode mode, System.Boolean overwrite, System.Boolean verified) [0x0000e] in C:\projects\radarr-usby1\src\NzbDrone.Common\Disk\DiskTransferService.cs:183 
      at NzbDrone.Core.MediaFiles.MovieFileMovingService.TransferFile (NzbDrone.Core.MediaFiles.MovieFile movieFile, NzbDrone.Core.Movies.Movie movie, System.String destinationFilePath, NzbDrone.Common.Disk.TransferMode mode) [0x0012b] in C:\projects\radarr-usby1\src\NzbDrone.Core\MediaFiles\MovieFileMovingService.cs:120 
      at NzbDrone.Core.MediaFiles.MovieFileMovingService.CopyMovieFile (NzbDrone.Core.MediaFiles.MovieFile movieFile, NzbDrone.Core.Parser.Model.LocalMovie localMovie) [0x00086] in C:\projects\radarr-usby1\src\NzbDrone.Core\MediaFiles\MovieFileMovingService.cs:99 
      at NzbDrone.Core.MediaFiles.UpgradeMediaFileService.UpgradeMovieFile (NzbDrone.Core.MediaFiles.MovieFile movieFile, NzbDrone.Core.Parser.Model.LocalMovie localMovie, System.Boolean copyOnly) [0x0009b] in C:\projects\radarr-usby1\src\NzbDrone.Core\MediaFiles\UpgradeMediaFileService.cs:65 
      at NzbDrone.Core.MediaFiles.MovieImport.ImportApprovedMovie.Import (System.Collections.Generic.List`1[T] decisions, System.Boolean newDownload, NzbDrone.Core.Download.DownloadClientItem downloadClientItem, NzbDrone.Core.MediaFiles.MovieImport.ImportMode importMode) [0x00258] in C:\projects\radarr-usby1\src\NzbDrone.Core\MediaFiles\MovieImport\ImportApprovedMovie.cs:109 

    I also tried setting the permission option, but that didnt work either....

    image.png.3dc9a8a7586ae43d26f2665015d9463a.png

     

    Any special parameter settings in the docker for Radarr?

     

    Everything is working the files are transferred Radarr see them and picks them up for transfer and naming to the new location

    But I Radarr will not save files to a UAD SMB drive (Might be a Radarr problem and not a UAD/Docker problem?)

     

    I tried using the Krusader tool to write files to the SMB share and that worked perfectly

     

    I have also created a bug on this for Radarr: https://github.com/Radarr/Radarr/issues/3649

     

     

     

  13. 3 hours ago, saarg said:

    Can't you just ssh in and delete the files?

    Your right!!! of course as root user you can do anything.... Didnt think about unraid root being the solution

    Deleted all temp files (After a preclear I could format the SSD - I know preclear is not for SSD but I couldnt get UAD to show the format option

    I then was able to format the drive and copy the files to this seperate SSD for my appdata so hope this solves this for the time being

  14. Hi All

     

    I have a problem accessing files on a mounted unassigned drive

    (But only for data containing the Appdata for Emby)

    Also I can not unmount the drive? But the mount dosent work correctly because I cannot access the drive as a SMB share?

     

    The drive is full:

    image.thumb.png.5cfe1b5efa32fa70415fed4e0d4d2056.png

     

    Trying to access the files so I can delete these file (Initial thought is was Plex) in Crusader I can see that the files are locked

    And that Emby have generated a temp file that is 235G !!! because of this I can not run my servers

    Normally I would correct any file rights in Unraid but that does not work for assigned devices?

    Please help, my last reboot hang up the system and I had to cut the power....

    image.thumb.png.0821b95507a1da370ae73356f335b7ce.png

  15. 45 minutes ago, saarg said:

    Post your docker run command. The default transcoding path is somewhere in the app data folder.

    Hi @saarg

     

    I found the problem, but need some help to solve it....

    I have the appdata folder on a seperate SSD for Plex

    Looking on the SSD i can see a temp file in the cash that just explodes in size? (239G in a single file - think its TV recording going crazy )

    I have stopped the Plex server, but I cant delete any of the files, even using Krusader?

     

    How can I delete files on a UAD SSD when I cant change the access rights? (Tried in Krusader)

    Normally I would do a fix all R/W rights on Unraid for all drives, but in this case I can't do that when its Unassigned device

  16. I just updated the Plex docker to Version 1.16.3.1433 (Unraid is running Version: 6.7.2)  

     

    After the Plex update I get this error:

    image.png.2db44f358049f3de22339565548dbbc9.png

     

    I have plenty of room so this is not the problem.

    I have Plex stored on another special SSD and had no problem

    image.thumb.png.828b9e057aaf7b52d92739f779bf28b8.png

     

    Could it be the transcoding folder? (I have never used it, default is fine)?

     

    I am using HW acceleration and it look to be running okay?

    image.png.86d48103b8cfab29254d14e0eae8e73f.png

     

    Hope someone can share some light on this....

    UPDATE:

     

    Where does it save the transcode files? (It's not on my cash drive) plenty of room

    Index of /mnt/cache/appdata/plex/Library/Application Support/Plex Media Server/Cache

     

    So it must be on my Appdata drive?

    /mnt/disk/SSD/plex (But the folder is empty)

    /mnt/disks/SSD/plex/Library/Application Support/Plex Media Server/Cache/Transcode

     

    I would like the speed so either defining a specific location in the docker Path for transcoding folder (Optional)?

    On a SSD? or my cash drive? any recommendations from the power users ?

     

     

  17.  n/php5-fpm.sock:", host: "localhost", referrer: "http://localhost/Dashboard"
    Jul 19 09:07:42 UNRAID nginx: 2019/07/19 09:07:42 [error] 7937#7937: *108047 c                                                                                                          onnect() to unix:/var/run/php5-fpm.sock failed (11: Resource temporarily unavail                                                                                                          able) while connecting to upstream, client: 127.0.0.1, server: , request: "POST                                                                                                           /plugins/preclear.disk/Preclear.php HTTP/1.1", upstream: "fastcgi://unix:/var/ru                                                                                                          n/php5-fpm.sock:", host: "localhost", referrer: "http://localhost/Dashboard"
    Jul 19 09:07:47 UNRAID nginx: 2019/07/19 09:07:47 [error] 7937#7937: *108047 c  

     

    Update: Ok only seeing errors for preclear - I have removed the folder under plugin on the flash and done a powerdown -r

    Hope that solves the problem