Badboy

Hi, Had Wireguard setup before for dockers only, something happened and I have to reset it. I'm using Mullvad vpn. When I generate the file at Mullvad, then use Wireguard's tunnel import, it kills Unraid's internet connection, can't get back in unless I reboot the server. (Delete file off the USB} What I'm I missing? By default it is on tunneled access for dockers. Running 6.12.4. Thanks.

Doesn't matter, have a new board coming. Not trying to access remotely, I'm on my local network. Haven't changed the DHCP. Router is telling me ip address has been set by server. Power button, can only be used 2 ways, soft reset or long press. (No way to disable) Yes, the button could be broke. Also losing the screen and usb port the keyboard is on, when i go to the bios screen. I was on newer bios firmware before, can't remember if it did the same thing. I wasn't blaming Unraid for every thing. Just asking some general questions. I guess the new board will tell the story. Thanks for responding.

Just lost the internet to the server. Lasted almost 11 hours. I will pull the logs when I get it backup. At a loss here. Also, lose the power button to hard reset. Have to use switch on the back. Doesn't seem to make sense. Thanks.

I did a q flash on the board, seems to boot properly, set a higher static ip in the network settings, internet is working right now. LOL Haven't enabled drives yet. I know some of the network options have slightly changed on Unraid, Should I enable bridging? What over settings should I adjust maybe to make it perform smoother? Almost order a new board. See how it goes. Thank you for responding.

Sorry, haven't logged on for a bit. I like the m.2 slots and the PCIE. I need a fast Ethernet port, I use most of those features. If I could get away with something cheaper I would. It's looking like an network issue now away. Thanks for the input. Appreciate it.

Been losing the internet again, have a static ip set in Unraid. I noticed my ISP has started changing the public ip address every 3 or 4 days. I changed my cpu, it was showing debug codes that lead me to believe it was the cpu. Still dropping internet, lasted about 12 hours, only device doing it. Your public ip doesn't effect Unraid's static ip correct? I had this issue before, so I put every device on a reserved ip, solved the problem up until now. The only difference this time is I can't use my power button at all to hard reset. Have to use the switch on the back. Have a Gigabyte x570s board. I have unreserved all ips, going to delete the network file and reset the settings, put Unraid on a higher ip. I still don't think it's normal the power button to totally quit, even if the internet goes out. I thought it might be the board, I still have a feeling it's something to do with the network. I do have a 10g Nic card I could stick in my 3rd PCIE slot, also have a GPU and sata expansion card plugged in 1 & 2 slots. Any ideas?

I use to use Intel all the time. Pricing got too high. The Ryzen cpus work pretty good. I normally buy Asus boards. I might have to go back to that. I know they have been having issues. If I go to Intel now, would have to change cpu.

Looking for a motherboard with the same features, but with WOL. Any ideas? I hate looking for a motherboard. LOL Here's what I have on this one. "X570S AORUS MASTER (rev. 1.0) Key Features | Motherboard - GIGABYTE Global" https://www.gigabyte.com/Motherboard/X570S-AORUS-MASTER-rev-10#kf

That's what it looks like. They just don't make things like they use to. The price of the boards for the value is ridiculous. Thanks.

Here's what happening, unraid goes offline, the bad thing is my power button won't work at all. I did a bios update and unraid, still the same outcome. In order to get it back up I have to use the power switch on the back. Sometimes it won't boot up board is posting a 15. If I reset the cmos battery it boots up and the power button works again. About 30 minutes,later goes offline. Haven't pulled logs yet, everything is down again. Any ideas? I put a new battery in. Post logs later. Power supply is 850 corsair, running gpu, sata expansion card, 9 drives and 2 m.2 drives My board is a gigabyte X570S Aqua Master CPU Ryan 5900 Just tried to reboot, all lights on, fans running, won't boot. Now posting a 33 on the board.

Thanks for clarifying. 👍

Hi guys. I'm currently not using a cache pool, my speeds for transferring files internally on unraid are slow. I'm thinking of adding a cache pool with this Corsair MP600 PRO LPX 4TB M.2 NVMe PCIe. Can I set the cache so it is in raid mode. If something fails during a transfer I won't lose it? Better way? Thanks

Solved it, for some reason the GPU stats app got kicked out. Update must have did it. Still not sure why my cpu is spiking more then usual using FileFlow. The main thing is the card is working. Thanks for your help.

Sorry, what I did was shutdown, removed the GPU, booted backup, shutdown again. put the card in again. Still not showing up. Took out expansion card as well. I think an update might have messed it up.

Hi Everyone, Running Version 6.12.3 Unraid system:Unraid server Pro, version 6.12.3 Model:Custom Motherboard:Gigabyte Technology Co., Ltd. X570S AORUS MASTER, Version: Default string, s/n: Default string Processor:AMD Ryzen 9 3900X 12-Core @ 3800 MHz HVM:Enabled IOMMU:Enabled Cache:L1 - Cache = 768 KiB (max. capacity 768 KiB) L2 - Cache = 6 MiB (max. capacity 6 MiB) L3 - Cache = 64 MiB (max. capacity 64 MiB) Memory:32 GiB DDR4 (max. installable capacity 128 GiB) DIMM 1: Unknown CMW32GX4M2C3200C16, 16 GiB DDR4 @ 2133 MT/s DIMM 1: Unknown CMW32GX4M2C3200C16, 16 GiB DDR4 @ 2133 MT/s Network:bond0: fault-tolerance (active-backup) eth0: 2500 Mbps, full duplex, mtu 1500 Kernel:Linux 6.1.38-Unraid x86_64 OpenSSL:1.1.1u P + Q algorithm:9661 MB/s + 34311 MB/s Not sure when my NVidia p2200 GPU disappeared. I noticed it today when I went to use Fileflow, then I checked the main dashboard where I have always checked it. Wasn't there. GPU has always been in top PCIE slot. The only thing I did was put a SATA expansion card in the second PCIE slot, so I shutdown, took the expansion card out, rebooted. Still doesn't show. It doesn't look like it is showing in the hardware profile either, might have missed it. Unless the Unraid update did it and I never noticed. Nvidia Info: Nvidia Driver Version:535.86.05 Open Source Kernel Module:No Installed GPU(s):0: Quadro P2200 0B:00.0 GPU-40738f74-f1b3-d235-aab2-a678b0d72019 Any ideas? Thanks

Sorry Jonathan, where's that setting?

Thanks, don't care just an extra backup in case the raid fails. Figured I would put the disks to use.

Hi, I can't get Duplicati to see the pool I have setup under unassigned devices. Kind of thought that should be easy...LOL Is there a way to do this? Unraid version Version 6.12.1. Thanks.

That worked thank you!!. I looked for something like that, was worded different.

I have 4 10tb older drives I want to use as an extra backup for plex. How do I set it up so it uses all 40tbs? It has raided them so I only have 20TB.

Fixed this by redoing the connection to the tunnel.

Hi, My Cloudfare was working, using the Clouldflared docker. My isp changed my ip address, so I updated but still couldn't get it working again, so I did something stupid and hit the "Refresh Token" button. I have now broken the connection between the docker and Clouldflare. I can't find the refreshed token. What do I do? Thanks in Advance.

I forgot to post the outcome to the internet dropping. I ended up reserving every devices ip address. It worked.

Hi, I just came across your post. How is this working out for you? I have PIA would love to get this to work with Wireguard. What settings did you use?

That's what I have stated doing. I have reserved the ip from the router end, even when I set the static ip for Unraid, I did it from the router. I was wondering if Deludgevpn might be causing an issue. I have Sonarr, Radarr and NZBget running through it. Can't see how.