BlackHawk3000

Hi guys, i have a problem. If i want add some shows, i get this issue Sorry. We Couldn't Find Any Series Matching 'Game.Of.Thrones' or some other titels. I get the same problem with Radarr, there i cant add movies.

I used the wrong /config path * Note: NEVER use /mnt/user/appdata/APP_NAME as the host path for the /config files. The FUSE md driver does not properly support symlinks which most Docker applications require (many documented instances of this around the threads). Always reference your appdata via /mnt/cache/appdata/APP_NAME If you do not have a cache drive, and are storing your appdata files within the array, then reference the appdata like this: /mnt/disk1/appdata/APP_NAME (or disk2, disk3, etc) If you dont do this, you may run into unexpected results with your applications -> not starting up, strange results, etc.

Hello, I have a new problem. After installing a docker container, I cant login on it. Only the docker with the port 8080 can used by WebGui. All other ports dont work. Firewall isnt block this. Log Docker He cant start the docker i think. ErrorWarningSystemArrayLogin Starting Plex Media Server.Starting Plex Media Server.Starting Plex Media Server.Starting Plex Media Server.Starting Plex Media Server.Starting Plex Media Server.Starting Plex Media Server.Starting Plex Media Server.Starting Plex Media Server. Thank you thevault-diagnostics-20180627-1136.zip

+ 1 for iscsi

You are right. If I send data, directly over the switch, so i get the full 1Gbits. But If I switch to an VLAN over my pfsense, so i get only the half. Update Its an pfSense Firewall problem. Client and unraid in one VLAN, i get the full 110MB/s.

Yes, it is. I hope i get my new Samsung 850 today, so i can try it with a better one. How can I look where the problem is?

Hello Guys, can help someone? My Cache SSD is only writing with 60-67MB/s. I think its an network problem, because if I do a write speed test, the Cache drops only from 445MB/s to 112MB/s by 10GB. Network Fast Mode is on and Jumbo Frames too. Thank you Edit: Its not a network problem, because if i copy something from the cache to my local pc, i have the 117MB/s. thevault-diagnostics-20180615-0606.zip

Somebody, has other tips?

With the IOM3.

Hello Guys, I have the same issue with my new H200E. 80Euro for nothing What can i do now? bigboy-diagnostics-20180607-0850.zip

Ok, i hope thats the problem, I orderd now a H200E and an QSFP to SFF 8088 Cable. New feedback at the next weekend. If somebody has other tips, please tell me

Which HBA card you prefer? Is an DELL H200E enough?

Onboard SATA use with the DS4243 isnt possible. Do you know a LSI HBA with QSFP. because the DS has only QSFP ports? Or can i try something like, other drivers...?

Here it is. bigboy-diagnostics-20180602-0609.zip

Hello guys, i know, this topic is very often here in the forum. But i think i tried a many things. I only have 36MB/s at the sync with four HDDs. If i put one out, the speed goes up to 140MB/s and thats ok i think. But why the speed drop down, if i use more HDDs? Motherboard is ok, i switched this with CPU. x2065A-R6 is ok too, i think i5 2500k Z68 Extreme 3 Gen3 with newest bios update 2x PCIe 16x (one x2065 / one LAN-Card) DS4243 Disk Shelf I hope you can help guys. Nice Weekend

Sorry for delay. Here is the File. I think the problem is the SSD Cache. If i unmount the Cache, the system is running. ParitySync with 30-36MB is normal? tower-diagnostics-20180531-1851.zip tower-diagnostics-20180526-1317.zip

Hello, i have a problem with my unraid system. I use a DS4243 DiskShell with an x2065a R6 card. When i try to build the Parity HDD, after 1 or 3 hours the system is freezing and i can only do a hard reset. I hope someone can me help. File below. Thank you INSTALL.TXT