Ak1rA

Hello, I have a little problem, I pulled bokker/unraidapi-re:latest but some infos (like cpu, motherboard, memory) doesn't appear ....

You are right... i forgot the fix to use NIC 2.5gbps usb I remove the r8169.conf and install RTL8152/3/4/6 USB Drivers by ich777 et voilà thanks 😅

Hello, I have 2 1gbps ethernet onboard: OMMU group 12:[10ec:8168] 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06) IOMMU group 13:[10ec:8168] 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06) and 1 usb 2.5gbps: Bus 004 Device 002 Port 4-3ID 0bda:8156 Realtek Semiconductor Corp. USB 10/100/1G/2.5G LAN on settings I have only eth0 (2.5gbps) I would like to dedicate 1 of 1gbps on my Home Assistant VM.... can you explain me to enable the other ports? thanks! unraid-diagnostics-20230423-2302.zip

after 15 hours another "page allocation failure" 😑 unraid-diagnostics-20230324-0743.zip

unraid-diagnostics-20230323-1447.zip I got some "page allocation failure" during this week, I don't why. Any idea? thanks!

Hi, I'm using a Realtek Semiconductor Corp. USB 10/100/1G/2.5G LAN RTL8156 USB 3.0 without any problems for months. After update to 6.11.3 the ethernet doens't work. I need to rollback to 6.9.2. I searched a solution and I found this thread: but I'm not safe to mod without a official fix... let me know If you have an easy solution (a walkthrough 😉) Thanks.

@kubed_zero thanks update with out any problem. Nice upgrade!

I tried but no luck I always have the "-2" problem. It's a very strange situation because before the last updates (last two update) it worked well without any problem.

@kubed_zero this is my results smartctl --nocheck standby -A /dev/sde smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.19.107-Unraid] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org Device is in STANDBY mode, exit(2) and smartctl -A /dev/sde smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.19.107-Unraid] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE ..cut.. 194 Temperature_Celsius 0x0002 181 181 000 Old_age Always - 33 (Min/Max 22/61) ..cut.. and If I repeat the first command: but the hdd is spin-down status

Thanks @kubed_zero for the update but I unistalled the plug-in e reinstalled, rebooted but I have the "-2" problem @unRAID:~# snmpwalk -v 2c -c public localhost NET-SNMP-EXTEND-MIB::nsExtendOutLine NET-SNMP-EXTEND-MIB::nsExtendOutLine."disktemp".1 = STRING: HGST_HUS726040ALA610_K4H96V2B: -2 NET-SNMP-EXTEND-MIB::nsExtendOutLine."disktemp".2 = STRING: HITACHI_HUA723020ALA640_YFHRL73A: -2 NET-SNMP-EXTEND-MIB::nsExtendOutLine."disktemp".3 = STRING: HGST_HUS726040ALA610_K4K3J2EB: -2 NET-SNMP-EXTEND-MIB::nsExtendOutLine."disktemp".4 = STRING: Hitachi_HUA723020ALA640_MK0171YFHRXSEA: -2 NET-SNMP-EXTEND-MIB::nsExtendOutLine."disktemp".5 = STRING: Hitachi_HUA723020ALA640_MK0171YFHRW22A: -2 NET-SNMP-EXTEND-MIB::nsExtendOutLine."disktemp".6 = STRING: ST1000DM003-1CH162_Z1DAYNTQ: -2 NET-SNMP-EXTEND-MIB::nsExtendOutLine."disktemp".7 = STRING: WDC_WD10EFRX-68PJCN0_WD-WCC4JJHFK0C9: -2 ..sigh..