KoNeko

I have a mainboard with 2 onboard x550. i replaced my gigabit switch for a 2.5 gbe switch. The X550 should also support 2.5 gbe but i still see 1 gbe in unraid as network connection. So i need to change some settings to enable/change it?

Would be great to backup the VMs without the need to turn them off. So that would be VM snapshots?

i fixed it by attacking a usb3.0 cable on the mainboard and bind that group to the VM. SO it all works now when i switch from VM without reattaching manually the kb/mouse to the VM. I will look at your plugin but not sure i need it now. Thx anyway for the response and my late reply

Im trying to connect to a Windows 10 VM via a KVM HDMI switch. https://www.easycoolav.com/products/hdmi20-switch-4x1-with-usb30-kvm-4-port-usbsupport-4k60hz-444-and-hdr-audio-breakout the GPU part is working. atleast when i start the VM. The screen goes black after a while and i cant see it anymore on the monitor. When i RDP into it it works. But when i try to pass through my keyboard and mouse which are connection to the above linked HDMI switch it does not work. My main computer is also connected to it and that works. In unraid i dont see a change either when i connect the USB to the unraid server. i dont see added entries or entries removed when i disconnect it again. I also added an extra USB card with 2 usb 3.1 on it. Unraid also does not see that one. Its possible this card is not working or drivers missing? i took the card from a other system but never actually used it so im not sure if the card was working before. EDIT: i removed the USB card and added an USB adapter that i can plugin into the mainboard. At first i was thinking it does not work but then i switched to that feed and it got powered. So i added the 2 things in my Windows VM settings. And it works. BUT. when i switch to a other computer and than back its broken again i have to manual attach the KB and mouse again then it works. So i guess i need to isolate that adapter in unraid and pass the whole adapter to the VM ? thanekos-diagnostics-20230324-1619.zip

i have it fixed now. i edited the docker and enabled Privileged. and when it rebuild and started it works again.

im getting a error since i updated unraid to 6.10.1 it says Failed to close file descriptor for child process ( operation not permitted)

Would be great if it was part of it natively. a Pre-clear before adding it to a pool

Good ZFS support on unraid would be great. But i think if you want to switch you need a to start over? you cant just convert excisting hdds to zfs with data intact?

Thx for the great podcast and the links Will be moving soon to a new home so i can do a clean setup of all new and fun stuff

i did increase the timing somewhat but that is a good idea to time that. Will do that once the check is done in a day or 2 or so

yes the partiy check did start automaticly.

i did a normal reboot via the Gui on unraid and i got the warning Parity Check Tuning Automatic unRaid Non-Correcting Parity Check will be started 1629649753 Unclean shutdown detected warning i dont have any VM currently running they are off and only 6 dockers online.

64 GiB DDR4 Multi-bit ECC on AMD Ryzen Threadripper 2950X

that would be nice to see. i also saw that video if the gpu is using less kWh if the VM is on then when its off. Would be great if unraid detects the nvidia/Amd gpu to load the driver so it can put it in a lower powerstate. Saves power and maybe some heat also.

Yes i know i can do that with the second picture. But in the first one i can only enter a host port.

i moved to this docker because the linuxserver ones isnt beeing updated anymore. i disabled the VPN option because i dont need that. A Big problem that i have with this docker is i get often [12.08.2021 00:56:44] The request to rTorrent has timed out. [12.08.2021 00:56:50] The request to rTorrent has timed out. When i than press F5 to refresh the page it just keeps loading. I have to restart the Docker but often than also it doesnt get to the gui. it doesnt want to run at all. So what is different on this client then the old linuxserver rutorrent ? When i run the old docker of linuxserver. i start that one i can add 100 torrents and it goes instantly no problems no lag nothing. for both dockers all ports are open on the router etc.

When i edit a template and i add a port i see this when i have it on anything else than bridge. When i put it on bridge i see containerport and Host port.

Old topic Sure but would be great to beable to add in the template that you can do the multiport thing. Also if the docker is on Custom Br:0 so i can give it a own IP. i cant "redirect" ports like when its on bridge.

i got a own mail server in a VPS that runs fine. mostly my gmails are for the older things i still use and for some spam things. there is docker-mailserver. but that is a complete mail server. Im just looking for somekind of client that can pull all mail and store it. So if the email on the other email is removed or whatever i still have a copy local on my unraid. Before my unraid i had qnap and it had a qmailclient that could do that. But that is for qnap only and its paid now which wasnt when i was using it. there is fetchmail or getmail those are in a docker but havnt been updated for years.

Im looking for a way to backup my email adresses like my @gmail's and my @own domains. Is there a docker or plugin where i can fetch the emails from those email adreses via Imap?

Im wondering how to restore a VM backup.

is it possible to change some sections from the like the first row to the second or rd row on the frontpage? because my first row is getting long while the 2nd and 3rd are the standard ones.

Swap stopped renewing my Letsencrypt cert since this week. i didnt change anything in the docker or any config file of this docker. i do it via DNS which always worked the credentials are in the ini file at that location. Failed to renew certificate .nl with error: Missing properties in credentials configuration file /config/dns-conf/transip.ini: * Property "certbot_dns_transip:dns_transip_key_file" not found (should be RSA key file(convert with openssl rsa -in transip.key -out decrypted_key)). * Property "certbot_dns_transip:dns_transip_username" not found (should be Transip username). - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - All renewals failed. The following certificates could not be renewed: EDIT: maybe its new or it got removed somehow but after i added and restarted the container its all fixed.

It seems the Linuxserver/rutorrent isnt beeing updated anymore or so. So was checking this. But it has stuff like VPN which i dont need. I can disable it i saw that is ok. BUT can i also move ALL my settings over from the old one to this one ? Just copy some files start and it works again ?

Well what i did was did a factory reset on my mainboard. mine also has a BMC vga output port i put that as the main videocard of the computer. Enabled the iommu stuff again. did a reinstall of the VM and its working again. and i dont see any lag that i can notice. still have to do more tests and install steam etc on it to test. but it looks nicely. i didnt change anything in the XML for this. Only problem that i have i cant put tho my keyboard Nov 17 19:35:39 kernel: input: Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Keyboard as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:1B1C:1B2D.0025/input/input66 Nov 17 19:35:39 kernel: input: Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Consumer Control as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:1B1C:1B2D.0025/input/input67 Nov 17 19:35:39 kernel: input: Corsair Corsair Gaming K95 RGB PLATINUM Keyboard as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:1B1C:1B2D.0025/input/input68 Nov 17 19:35:39 kernel: input: Corsair Corsair Gaming K95 RGB PLATINUM Keyboard as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:1B1C:1B2D.0025/input/input69 Nov 17 19:35:39 kernel: input: Corsair Corsair Gaming K95 RGB PLATINUM Keyboard Mouse as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:1B1C:1B2D.0025/input/input70 Nov 17 19:35:39 kernel: hid-generic 0003:1B1C:1B2D.0025: input,hiddev97,hidraw1: USB HID v1.11 Keyboard [Corsair Corsair Gaming K95 RGB PLATINUM Keyboard] on usb-0000:01:00.0-1.4/input0 Nov 17 19:35:39 kernel: hid-generic 0003:1B1C:1B2D.0026: hiddev98,hidraw2: USB HID v1.11 Device [Corsair Corsair Gaming K95 RGB PLATINUM Keyboard] on usb-0000:01:00.0-1.4/input1 i use a HDMI switch that has my Mouse and Keyboard. It does see my mouse but not my K95