dalben

3 hard lockups in 36 hours of 6.10 RC1 If no one is interested in the logs or any potential other checks or tests I'll just roll back to 6.9 Latest diagnostics attached tdm-diagnostics-20210811-1548.zip

I've had two hard lockups in 12 hours since installing this release. Nothing in syslog around time of lockup. Diagnostics attached. I'll stay on this release for a bit longer in case there's a need for more info or a fix, but will need to roll back to 6.9 sooner rather than later. tdm-diagnostics-20210810-0718.zip

After reading most threads here and on the interweb that seemed relevant, I'm still unsure if what I want to achieve is even possible. So hoping someone here knows. My unraid server as 2 NICs, eth0 and eth1. Eth1 is setup on a separate vlan and is bridged (br1) with all dockers having their own IP address on the br1 bridge. Is it possible to route all internet traffic on the vlan/br1/eth1/second NIC through a Wireguard tunnel to my VPN provider? @TechMed would it be possible for you to paste screenshots of your config? You've got going what I failed at last night as part 1 of my testing

Changing the repository to portainer/portainer-ce worked for me. I have 2.6.1 running now.

Look at any plugins you use and see if there was an update to any around the same time as the problems started. My server started experiencing lockups last weekend. I had 3 in 4 days. Nothing at all in the syslog, server just halted. I removed a recently updated plugin and it's been stable for 2 days. I'll let it go a bit longer before claiming I found the issue. As there has been no other reports of random lockups and it's a very widely used plugin, I'm not confident to name it until I am sure. if it's been doing it from day 1 then maybe it is hardware related. My previous build would lock up at odd times. Sometimes nothing for two weeks then a few in succession, very random times and frequency. Nothing in the syslog before the lockup. It had been going on for a year or so. I finally swapped out the motherboard/CPU and RAM and replaced them with components I had in my main PC. Net result my server stopped random lockups and was stable until recently. My PC, with the old server internals, hasn't missed a beat either.

This thread really doesn't have enough "Soon" in it.

Yeah, I ended up pulling the wiserain docker and have it working. WebGUI gives you a lot more though I never use it. Flexget is one of those no fuss set and forget apps that I love

Does anyone know/have a flexget docker that is more updated? The version in this docker is 2.10.61 (2017-06-13). The other dockers I found on Apps are just as old, if not older.

Yes I have a similar issue. Web frontend won't load. There is an issue with the config.json in the container it seems. What's the easiest way to roll back the container to pull the previous container?

No, I didn't. Not possible, not sure if it will be posssible. The syslog server in unraid serves everything in my house. Routers, WAP, hubs, etc. Anything that can utilise a syslog server has it's logs sent to the unraid syslog service. Ideally I'd love for it to be a disk outside of the array if for no reason other than that would be my preference.

The inability to create groups in UNRAID hit me today. I have two RPIs running Pihole. In an attempt to save the SD Card, I wanted to have pihole save it's log files on an UNRAID mount. It seems PiHol is quite finicky about the ownership of the log files and needs pihole:pihole as the owner for it to work. Alas, I can create a pihole user, but no provision to create the group that's needed.

Thanks. Found the setting, it was on Auto. Set to Yes and all good now.

I've noticed I can't map directly to a pool disks. I have a mirrored cache and a single ssd called system. U used to be able to access them via \\tower\cache or \\tower\system. Now I can't reach them, Is this by design? If so, is there anyway a user can revert back if they want too? I have a few scripts and other setups throughout my network that look for the above paths that are now failing.

Here is my go file entry # start Intel GPU for Jellyfish modprobe i915 chown -R nobody:users /dev/dri chmod -R 777 /dev/dri

I installed the new container (named just Tdarr). Is there anything special I need to do to get my CPU GPU activated? It doesn't seem to be using QSV when encoding.

Changed Status to Closed

Ah, thanks.

I've just rebuilt my server and installed a NVMe and a second SDD because I was looking to do that exact same thing you've got. I was going to setup the NVMe as unassigned and move the dockers and appdata there as googling showed there are a few people doing that to improve the performance. With 6.9 and multiple pools, does that provide the same performance gains as an unassigned drive? I was waiting for 6.9RC before dipping my toes in but I might move a bit faster if it will give me what I wanted without needing to make too many chages.

The current setup of Unraid allows for it to be a syslog server. But the setting only allow you to select a share on the RAID. Syslogs aren't something I find worthy of RAID redundancy and by forcing the syslog to a raid share, that disk never spins down. Is there a way to have the syslog directory reside on a unassigned drive? I currently have an unassigned drive that's mounted as backup (\\tdm\backup\) and I'd love to have the syslogs there rather than on the RAID. Does anyone know how it can be done?

What's the easiest way to setup a cron job in the container? Or uses the server's crontab to trigger a command in the container? I'm trying to sync 2 Pihole installs, one on a Raspberry PI, and this container. The final step is to run "pihole restartdns reload-lists" in the container to read the sync'd db and custom.list. Any ideas would be appreciated. For those interested, I just copy (rsync) the gravity.db and custom.list from the RPI directly to the appdata/pihole/ directory on unraid. The restart command will read the new files in. I'm simply using cron to kick off the push at 30min past the hour and I want to run the script here at 32min past the hour. I'm sure there are sexier ways of achieving this but this is already maxing out my technical abilities. This also assumes the docker version of pihole is running v5.

Thanks. I'm actually not too fussed as your defaults work fine for me and I now get the Webgui. Was more trying to help you track down the issue.

Yeah, I tried advance view, they weren't there, Also check "show more settings", not there either

If it helps, I updated the container and like pm, I didn't see the options for the webgui variables. But when I started the container, I noticed 8222 was in the startup command so I sent a browser to the container IP:8222 and it connected great. So it's there, just no displaying.

Actually, I realise my TZ is set incorrectly on Paperless. it's showing UTC. Above it says the TZ variable has been removed because it uses the servers TZ but it doesn't seem to be happening in my case. Any idea how I can fix this? My server's TZ is set correctly ( (UTC+08:00) Kuala Lumpur, Singapore) UPDATE: Looked through the documentation and saw that the PAPERLESS_TIME_ZONE variable still works. Added it to the startup script and all is good.