medolino2009
Members
-
Joined
-
Last visited
Everything posted by medolino2009
-
Hi, thank you for response, however, i don't think i explained good so you could understand what i mean... If you look at photo up here in post of user "Blender50", you can see "UPS Load" is around 359watt, or UPS load around 46% (in percentage)... This is how it need to be ...in my case UPS load is 36watt (around 10%)... this is not correct... it should be around 90 watt (around 25% - 30%)... If this was correct, "Runtime Left" could be calculated better... If i could change something to make wattage display correct, everything else would be correct as well. Thanx in advace Best regards Miki
-
hi, anyone recognize problem i have ? (couple of posts up)... Thanx in advance....
-
hi guys, thank you very much for this plugin... i have installed it, and use it with my "GreenCell 600VA" UPS, it uses driver "blazer_usb"... i've got it mostly work...only thing that is still not working correctly is "ups load"... it is almost always on 10% (36watt), sometimes goes to 40 or 50 % but my server is behind shelly plug, and i am monitoring energy usage there... and it is around 88 watt (and this is more logic than 36watt for i7 with 5 HDD's etc...)... can i somewhere make correction for this ups load ? (because of this "runtime left" is also not correct of course).. Hope to get some info about this...i am looking hours and hours for some option about this trough forum here and google...couldn't find anything. Thank you in advance. best regards, Miki
-
Hi, i am Miki. I am using unraid software many years and i love it. After latest update to v6.9.1, CPU goes to 100% after some time (after couple of hours of normal work), gui become unresponsive and after couple hours i can't ping it anymore ...so i need to hard reset server and everything works fine for another couple of hours, until CPU goes to 100% again... i have 32GB of DDR4 memory, i7 9700 CPU, ASUS PRO moederboard, NVME SSD for cache and 4 normal hard disks connected to SAS/SATA controller (raid controller flashed so it could be used in unraid as normal controller) Hardware is not changed after update to 6.9.1, everything is same, and on older version of unraid i had no trouble with CPU going to 100% i use couple of dockers: freepbx, Emby server, Plex server , mango database, nextcloud, maria database, rocketchat, radarr, sonarr .... that is about it... Can i downgrade back to lower version ? (every morning i need to reset server because my telephony (freepbx) is not working) Thank you in advance for your help Best regards Miki EDIT: This is message i found when i connected monitor to server: [img]https://i.ibb.co/pwZwcSL/IMG-20210315-112727.jpg[/img]
-
Thanx for this handbrake docker...works great.