Darnshelm

Hi I have very low fps on bf v i only get 14-20 fps on low settings I have a dual xeon e5-2860 2,8ghz 112 gb ram my wm have 12 cores and 16 gb and 3060 ti here are my xml settings for right now I have try more cpu less cpu more ram less ram but in loading meny i have over 250 Fps and in begining I have 35-40 fps but it drops down to 14-20 after 5 min playing i have check temps on cpu it only 55 C <?xml version='1.0' encoding='UTF-8'?> <domain type='kvm' id='3'> <name>Windows 10 test</name> <uuid>b04e314d-9a1b-182a-3e0e-ce3d8fd55bfa</uuid> <metadata> <vmtemplate xmlns="unraid" name="Windows 10" icon="windows.png" os="windows10"/> </metadata> <memory unit='KiB'>17301504</memory> <currentMemory unit='KiB'>17301504</currentMemory> <memoryBacking> <nosharepages/> </memoryBacking> <vcpu placement='static'>12</vcpu> <cputune> <vcpupin vcpu='4' cpuset='6'/> <vcpupin vcpu='5' cpuset='26'/> <vcpupin vcpu='6' cpuset='7'/> <vcpupin vcpu='7' cpuset='27'/> <vcpupin vcpu='8' cpuset='8'/> <vcpupin vcpu='9' cpuset='28'/> </cputune> <numatune> <memory mode='strict' nodeset='0'/> </numatune> <resource> <partition>/machine</partition> </resource> <os> <type arch='x86_64' machine='pc-q35-5.1'>hvm</type> <loader readonly='yes' type='pflash'>/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd</loader> <nvram>/etc/libvirt/qemu/nvram/b04e314d-9a1b-182a-3e0e-ce3d8fd55bfa_VARS-pure-efi.fd</nvram> </os> <features> <acpi/> <apic/> <hyperv> <relaxed state='on'/> <vapic state='on'/> <spinlocks state='on' retries='8191'/> <vendor_id state='on' value='none'/> </hyperv> </features> <cpu mode='host-passthrough' check='none' migratable='on'> <topology sockets='1' dies='1' cores='6' threads='2'/> <cache mode='passthrough'/> </cpu> <clock offset='localtime'> <timer name='hypervclock' present='yes'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/local/sbin/qemu</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source file='/mnt/disks/Samsung_SSD_870_QVO_1TB_S5SVNG0NA00376B/Windows 10/vdisk1.img' index='4'/> <backingStore/> <target dev='hdc' bus='virtio'/> <boot order='1'/> <alias name='virtio-disk2'/> <address type='pci' domain='0x0000' bus='0x04' slot='0x00' function='0x0'/> </disk> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source file='/mnt/disks/Samsung_SSD_870_QVO_1TB_S5SVNG0NA00376B/Windows 10/Windows 10/vdisk2.img' index='3'/> <backingStore/> <target dev='hdd' bus='virtio'/> <alias name='virtio-disk3'/> <address type='pci' domain='0x0000' bus='0x05' slot='0x00' function='0x0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/isos/Windows.iso' index='2'/> <backingStore/> <target dev='hda' bus='sata'/> <readonly/> <boot order='2'/> <alias name='sata0-0-0'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/isos/virtio-win-0.1.173-2.iso' index='1'/> <backingStore/> <target dev='hdb' bus='sata'/> <readonly/> <alias name='sata0-0-1'/> <address type='drive' controller='0' bus='0' target='0' unit='1'/> </disk> <controller type='usb' index='0' model='ich9-ehci1'> <alias name='usb'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/> </controller> <controller type='usb' index='0' model='ich9-uhci1'> <alias name='usb'/> <master startport='0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci2'> <alias name='usb'/> <master startport='2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/> </controller> <controller type='usb' index='0' model='ich9-uhci3'> <alias name='usb'/> <master startport='4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/> </controller> <controller type='pci' index='0' model='pcie-root'> <alias name='pcie.0'/> </controller> <controller type='pci' index='1' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='1' port='0x8'/> <alias name='pci.1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0' multifunction='on'/> </controller> <controller type='pci' index='2' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='2' port='0x9'/> <alias name='pci.2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <controller type='pci' index='3' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='3' port='0xa'/> <alias name='pci.3'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/> </controller> <controller type='pci' index='4' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='4' port='0xb'/> <alias name='pci.4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x3'/> </controller> <controller type='pci' index='5' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='5' port='0xc'/> <alias name='pci.5'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x4'/> </controller> <controller type='pci' index='6' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='6' port='0xd'/> <alias name='pci.6'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x5'/> </controller> <controller type='pci' index='7' model='pcie-to-pci-bridge'> <model name='pcie-pci-bridge'/> <alias name='pci.7'/> <address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/> </controller> <controller type='pci' index='8' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='8' port='0xe'/> <alias name='pci.8'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x6'/> </controller> <controller type='pci' index='9' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='9' port='0xf'/> <alias name='pci.9'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x7'/> </controller> <controller type='pci' index='10' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='10' port='0x10'/> <alias name='pci.10'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </controller> <controller type='virtio-serial' index='0'> <alias name='virtio-serial0'/> <address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x0'/> </controller> <controller type='sata' index='0'> <alias name='ide'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/> </controller> <interface type='bridge'> <mac address='52:54:00:ab:ad:4b'/> <source bridge='br0'/> <target dev='vnet2'/> <model type='virtio-net'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x02' slot='0x00' function='0x0'/> </interface> <serial type='pty'> <source path='/dev/pts/2'/> <target type='isa-serial' port='0'> <model name='isa-serial'/> </target> <alias name='serial0'/> </serial> <console type='pty' tty='/dev/pts/2'> <source path='/dev/pts/2'/> <target type='serial' port='0'/> <alias name='serial0'/> </console> <channel type='unix'> <source mode='bind' path='/var/lib/libvirt/qemu/channel/target/domain-3-Windows 10 test/org.qemu.guest_agent.0'/> <target type='virtio' name='org.qemu.guest_agent.0' state='disconnected'/> <alias name='channel0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <input type='mouse' bus='ps2'> <alias name='input0'/> </input> <input type='keyboard' bus='ps2'> <alias name='input1'/> </input> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x03' slot='0x00' function='0x0'/> </source> <alias name='hostdev0'/> <rom file='/mnt/user/isos/vbios/3060ti gpu vbios.rom'/> <address type='pci' domain='0x0000' bus='0x06' slot='0x00' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x03' slot='0x00' function='0x1'/> </source> <alias name='hostdev1'/> <address type='pci' domain='0x0000' bus='0x08' slot='0x00' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x00' slot='0x1d' function='0x0'/> </source> <alias name='hostdev2'/> <address type='pci' domain='0x0000' bus='0x07' slot='0x01' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x0a' slot='0x00' function='0x0'/> </source> <alias name='hostdev3'/> <address type='pci' domain='0x0000' bus='0x09' slot='0x00' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x0b' slot='0x00' function='0x0'/> </source> <alias name='hostdev4'/> <address type='pci' domain='0x0000' bus='0x0a' slot='0x00' function='0x0'/> </hostdev> <memballoon model='none'/> </devices> <seclabel type='dynamic' model='dac' relabel='yes'> <label>+0:+100</label> <imagelabel>+0:+100</imagelabel> </seclabel> </domain>

No I have not don' know exact what to do?

Hi I found a Turnkey Docker that i try but just after few sec it stops and sending stop commands to all service I don't know whats wrong here from log etterm: $TERM is not defined. run-parts: /etc/rc2.d/K02confconsole exited with return code 1 Starting confconsoleStarting Initialization hooksdone. Starting enhanced syslogd: rsyslogd. setterm: $TERM is not defined. run-parts: /etc/rc2.d/K02confconsole exited with return code 1 Starting confconsoleStarting Initialization hooksdone. Starting enhanced syslogd: rsyslogd. Starting Samba AD DC daemon: samba. Starting uuid generator: uuidd. RTNETLINK1 answers: No such file or directory acpid: error talking to the kernel via netlink Starting ACPI services.... Starting periodic command scheduler: cron. Starting Common Unix Printing System: cupsd. Starting web server: lighttpd. Starting Postfix Mail Transport Agent: postfix. Starting OpenBSD Secure Shell server: sshd. Starting SSL tunnels: [Started: /etc/stunnel/stunnel.conf] stunnel. iptables v1.4.21: can't initialize iptables table `nat': Permission denied (you must be root) Perhaps iptables or your kernel needs to be upgraded. run-parts: /etc/rc2.d/S03turnkey-init-fence exited with return code 3 dmesg: read kernel buffer failed: Operation not permitted Starting daemon monitor: monit. Starting webmindone. System information (as of Wed May 27 00:36:35 2020) System load: 14.42 Memory usage: 84% Processes: 16 Swap usage: 0% Usage of /: 24.2% of 80.00GB IP address for eth0: 192.168.1.200 TKLBAM (Backup and Migration): NOT INITIALIZED To initialize TKLBAM, run the "tklbam-init" command to link this system to your TurnKey Hub account. For details see the man page or go to: http://www.turnkeylinux.org/tklbam WARNING: The container requires initialization (performed on first login). This can be performed from the host as follows: CID=$(docker ps -l -q) CIP=$(docker inspect --format='{{.NetworkSettings.IPAddress}}' $CID) docker logs $CID | grep "Random initial root password" ssh root@$CIP WARNING: Exiting this shell will stop the container. For regular console usage, SSH is recommended. done. Stopping NetBIOS name server: nmbd. Stopping enhanced syslogd: rsyslogd. start-stop-daemon: warning: failed to kill 59: No such process Stopping Samba AD DC daemon: samba. Stopping uuidd generator: uuidd. Stopping ACPI services.... Stopping periodic command scheduler: cron. Stopping Common Unix Printing System: cupsd. Stopping web server: lighttpd. Stopping Postfix Mail Transport Agent: postfix. Stopping rsync daemon: rsync. Stopping OpenBSD Secure Shell server: sshd. Stopping SSL tunnels: [stopped: /etc/stunnel/stunnel.conf] stunnel. Stopping SMB/CIFS daemon: smbd. Stopping daemon monitor: monit. Stopping webminStopping Webmin server in /usr/share/webmin done.

Hi I have my unraid server in basement I have started to use VM but i want direct connect to the wm machine with cabels and not use remote I need 10 meters of cabel to my desk. I thought maybe someone here already have done this here what cabels have you use. my motherboard don't supports thunderbolt. asus z9pe-8d ws

Hi My system have random start lossning my cache pool include my Unassigned Devices I know that I have one bad cache drive in the pool that I plan to replace. started to think it something diffrent when all drives are disapering I send over my logs it two diffrent one tower-diagnostics-20200219-2045 (1).zip tower-diagnostics-20200219-2045.zip

HI I mounted a unraid smb share on another unraid server but I get this error Feb 18 11:17:21 Tower emhttpd: error: get_filesystem_status, 6512: Operation not supported (95): getxattr: /mnt/user/appdata2 I have use this to mount the share on unraid server mount -t cifs //192.16x.xx.xx/rootshare /mnt/user/Array2 -o [email protected],password=,iocharset=utf8,file_mode=0777,dir_mode=0777 When I also try to unmout it says busy. The first Unraid server are my main server that alsways running. The Second are Vm Unraid server that I plan to use as Archive server that i have passthrought a raid card to handels my big disk expansion the disk expansion take lot of power and I try to run my system on lesser energy but still have almost same function. So I need a safe way to unmount the share without making the system unstable. If I stop the unraid Vm without unmout it the system start to lag and behave strange. I want to unmout it before i shutdown the VM and mount it when the vm have fully start

Hi I have found this blue iris docker but I can find the config file or a part of it here are link to the docker https://hub.docker.com/r/jshridha/blueiris/ the part of config i try to found are this docker run -d \ --name="BlueIris" \ -p 8080:8080 \ -p 5900:5900 \ -p 81:81 \ -v /path/to/data:/root/prefix32:rw \ jshridha/blueiris Advanced Options BlueIris version 5 is supported by default. If you'd like to run BlueIris 4, set the environmental variable: BLUEIRIS_VERISION=4 I want to change -v/path/....... to a share in my array because all changes I do in blue iris will not be save if I edit anything in te docker also want to know where to put Icon for blue iris to show correct icon under docker tab

Hi I get this error lstopo: pci-common.c:180: hwloc_pci_try_insert_siblings_below_new_bridge: Assertion `comp == HWLOC_PCI_BUSID_INCLUDED' failed. Aborted

HI I want help with what command I need to run to update firmware on my Dell PERC H200 (9211-8i) raid card. It first time i will try this and I don't want to brick the card. I try to read the manual how to do this but not sure exact what commands and what order I need to do them. Will move the raid card to test rig with windows 10. Will attach the files I have downloaded. Also hope they are correct //David 9211-8i_Package_P20_IR_IT_FW_BIOS_for_MSDOS_Windows.rar

thx have found that my card are Dell PERC H200 and should be 9211-8i. can that be correct?

Thx Any instruction how to flash Where to download the firmware

Today I got this on my screen. anyone know what wrong? tower-diagnostics-20190214-1815 (1).zip

Hi I have discovered that my system is freeze when I've played on my Gaming VM. The whole unraid stops responding. I can use the mouse, no tabs or windows can be used. But works perfectly after a reboot. This happens completely radnom after I've played. Gaming VM can be on for several days but a few hours after I've just played, everything stops working. The virtual machine is on its own SSD disk in unassing devices. However, the games are in Array. I have tried to read the diagnostic but can fine so much. tower-diagnostics-20181211-1009.zip

I thought that cache pool work as normal raid. So if I have 10 GB free space on first cache pool disk and start both of my vm are running then they will run from that disk. When I start to install programs inside my vm then vm will eat up 10gb on first cache pool drive and not expand to second cache pool drive. When 10 GB are full then the paus happened.

Okay where so I find my diagnostic? I have 1TB of space in cache pool and uses 300 of it. My 1 vm drive are 250 and 2 150