rollieindc

Members
  • Content Count

    92
  • Joined

  • Last visited

Posts posted by rollieindc

  1. Feb 6, 2021 - New DDoS Plex Media Server Vulnerability?

    Seems to be a number of recent news posts, like this one that PLEX Media Server is enabling distributed denial-of-service (DDoS) attacks across a number of vulnerable servers/systems. My understanding is that this is as much a network configuration issue as a PLEX software issue, as it seems to reply exploiting router port configuration (32400-32414) vulnerabilities. As PLEX is configured, users often enable external (internet) access to media (movies, music, etc) from one their server to other external devices (iPhones, tablets, etc) through the configuration process, when using protocols like universal plug and play (UPnP). UPnP allows systems on the same network (Server->Router) to seek each other out and share file Access. UPnP often uses simple service discovery protocol (SSDP) in order to do this.

     

    This is apparently where external hackers/attackers take advantage by leveraging the exposed SSDP in DDOS amplification attacks in the specific router ports. I don't understand all the dynamics of it, and am looking for that and other insights - especially where it comes to unRAID and PLEX interacting.

     

    My questions are:

     0) Should I be concerned? (I temporarily stopped/took my PLEX docker server offline on my unRAID server, and closed the port on my router. Am also on Verizon FIOS - so not sure if they are "intercepting" the DDoS within their network?)

     1) Anyone seen artifacts of a DDoS like this on their unRAID systems (either in VM or Dockers?)

     2) Anyone know if the vulnerability would likely exist with port forwarding typically seen with most home routers and a PLEX (unRAID) Server? Would/Could other local networked systems be compromised? How would you tell (on unRAID or other)?

     3) Would PLEX Media Server be more or less (or equally) vulnerable as a VM or as a Docker on unRAID?

     4) PLEX said they would be issuing a patch in the next few days, any idea how long that would take to propagate into the Docker versions that are in the Community Distributions in unRAID?

     

    Thanks for reading, and thanks especially for anyone more knowledgeable than me to provide additional insight and knowledge. It's greatly appreciated, and this forum is great - thanks to those who share information, and help keep it running!

  2. On 1/22/2021 at 12:07 AM, benak said:

    I have a T310 sitting around, I'm curious if you have any power usage/consumption data? 

    Nothing I can really share. I do have an APC UPS attached, and it seems to run around 150 watts on idle. If I get data from it, I’ll post it in this thread.

    FWIW- The 1050 is a nice add -IF- you plan to do transcoding with Plex, otherwise, I’d not bother. The VM performance on the T310 is “less than stellar” of late with build 6.8.3. And I’m happier to just have a headless NAS, with a Win10x64 image for a VM running a qbitorrent, and a Plex Docker. If I had it to do over, I’d build on a more modern SuperMicro base. But hey, cheap hardware. 

     

    Update:

    So, I went back to look at my UPS Logs, and my system seems to pull between 180-210 watts, depending on loads. I'm running a couple of VMs (one with BONIC for nCOVID folding & qbitorrent), and a couple of Dockers (one is Plex), but nothing too heavy. If I was running harder, I could see this going up to 300 watts easily. I probably top 350 watts at start/spin up.  If I was concerned about power, I'd definitely go to a laptop (90watts, 3Ghz i7) with dual SSDs (m.4's in RAID) and a SATA external drive based expander with larger (>10TB) drives that could spin down. But to be honest, I'm still ahead of the game on cost with this system (I think.) If I was concerned about throughput, then I'd be getting a old Dell r720 rack mount. But I'm not sharing media, and I don't need the hastles of users complaining. This is a small business & my digital photo archive. I don't need power, I need reliability. This gives it to me at a decent price-point.

  3. 22 OCTOBER 2020 - System & Network re-configuring.

     

    So I moved the Dell T310 server from "Cold standby" to our temporary rental house, that has Verizon FIOS (200mbs) service. So, sadly, nothing much to report - except more trials and tribulations setting up my network. Went to a new IP home address system. Systems came up ok, but the VMs are giving me issues, and only partially connecting to services. No idea why. Example, a google search will produce links, but clicking on any link ends up just hanging in FireFox like there is a DNS conflict - yet everything looks good when I ping at the same address. Weird! More later, I'm not done tweaking things yet...

  4. On 8/10/2020 at 12:05 AM, tjb_altf4 said:

    Officially not supported, but...

    https://forums.developer.nvidia.com/t/nvenc-and-gp106-100/67850/3

    But with some hacked drivers it might work

    So, bit of an update here. The Zotac P106-90 Card just arrived. (Looks like crap, but might still work.) For $30 on eBay, worth the shot. I might be able to do something with a "folding" computational machine, if nothing else. And if it's a working card, and I can't do anything with it, back on eBay it goes at a really good price. (shrug) Hardly a loss when I think about it- as I will have learned something.

     

    Reminder: My goal is PLEX Transcoding within a Docker using the NVIDIA port of unRAID;  not to run a gaming Windows 10 VM.

    (Sorry if that disappoints, but hey... these are my priorities.)

     

    And yes, I've seen the LTT discussion, and the potentials for unlocking the NVENC hardware decoder. Still working my way through some of those posts on REDDIT, and none of them actually gave it a "fair shot" on linux imho. And considering all risks involved, that's maybe not a huge thing. If I do this, it's going to be on tested on a rig I have with a unRAID 30-day trial license first. Not going to risk my main system on this "thing" (yet.) If I do get it to work, my goal is going to be testing PLEX with H.265 NVENC for some 4K files, and see what happens.

     

    Heck, to be honest, I really just want a few streams of 1080p to be cast to some TVs on gigabit lan set up, and maybe speed up some other offerings like the BOINC protein folding for nCOVID-19 project.

     

    It's probably going to be 30-60 days before I get any real results, so be patient. (Just got news that I am moving to a rental house for a year while we do a major home reno! So I get to move all my LAN and Server gear... so - Press [F] to pay Respect! to my bank account... ow.)

     

     

     

    bank account.png

    • Like 2
  5. On 5/8/2020 at 6:51 PM, xeats said:

    Do you know if it's possible please ?

    Am ordering one now off eBay, and will follow up on this after I have some chance to test it out. Everyone I've talked to says it's "possible" but has not yet been tested. Also, I don't expect the performance of a 1080GTX, but if it can do a h265 transcode - it will be worth it.

    • Like 1
  6. 08 AUGUST 2020 - System down for a bit.

     

    Put the Dell T310 server on "Cold standby" as the temps in the basement were getting outrageous, and that's where my home office is. We're planning a house renovation, so this is a short term summer heat issue. So, sadly, nothing to report. Did finally give up on Verizon DSL and went to Comcast (200mbs) service. I'm not pushing the 1TB data cap yet, so no real concern there either. And if I did, I'd adjust the service to unlimited downloads via a business account. I am going to add another SDD to the system to run my VMs through, but that's a minor detail. I did pick up a HDMI to USB 2.0 video converter, which I will be downloading some older videos off VHS tape with. Quality seems good at 1080p30, although most of the tapes will probably look better at 720p30. At least it's something to play with and pass the time.

  7. 25 JULY 2020 - A long overdue 2 month update.

     

    First, I'm doing "ok" with the Pandemic. No illness in the family. Had a colleague die from it, and another recover from it. Not my idea of fun.

     

    I also have "ditched" Verizon DSL in favor of a Comcast 200/5mbs dry drop (internet only). After being on it for a month, I am "good" with the stability that I've finally been able to get. Yes, the 1TB data cap sucks, but I've not been bumping up against it (yet), so I am not too worried. And since I don't serve out of the house (and am not traveling) - Comcast 200/5 beats the 4.0/0.6 I was getting from Verizon.

     

    But, it's been two months since my last post, and not much else has changed in my server system configuration or operation. I have taken the system down for a few days to reduce the heat load in the house, since we've been at 100F or higher this week. Still encountering a lot of issues with VM stability, but it's only when I use a graphics card in the VM and try to use a remote desktop app to access it. That kills the "standard" VNC connection, and I have to use a remote desktop like Remote Desktop for Chrome which was working - but would die with any windows 10 updates, and then I tried "Anydesk" - which appeared to crash my laptop.

     

    And I won't use TEAMVIEWER ever again. Once badly burned, never again.

     

    After that crash on the laptop, I did a short "flirt" on my laptop with Linux Mint and the xcfe desktop - I am back to running Windows 10 on my laptop in a "bare metal" configuration. I liked Linux Mint (and have it running as a VM on the server), but it just wasn't stable on my Dell Precision M6500 laptop. Even with 16GB of ram. It would "slog" from time to time, and the software loaders were terrible. So, back to Windows 10x64 (1909). I had Windows 7 on the laptop before, but with EOL on Win 7x64, I knew this day would come - and now that I am changed over, I'm not really missing anything about windows 7, except maybe the "gadgets" - which I know I could reload with "Rainmaker" - but honestly, why bother?

     

    Back to the server: So I'm watching the 6.9.0 beta comments, and don't think I will be jumping over to it too quickly on my Dell T310 server. I'm basically happy with Plex and my couple of docker and VMs running (except the remote desktop issues) all under 6.83, and watching the discussions prior to 6.9 public release. I want them (Lime Tech) to work out the last of the bugs - and then - that's when I will move over. To be honest, I wish they'd allow implementation of a virtualbox VM system, as the VM on unRAID still seems plagued by instabilities on some platforms. I'm looking forward to some of the new VM engine improvements I've heard of.

     

    I also have a new server box that I will transition to at some point, but the issue is more of "why". At this point, if I need more speed, I can pop the Xeon CPU in the current box out, and plug in a new CPU with a 40% bump in speed for about $50 - or in a new system I can replace the single Xeon with a dual CPU box and motherboard, with at least a 100% bump in performance, and with a lot more drive bays. But since the current system is not doing much from midnight to noon, I am wondering "Why change anything?" I'm a firm believer in "Let sleeping dogs lie". At some point I'll get bored with the performance, need a video editing rig, and something to process filters on lots of digital photos... but I am not (quite) there yet. Plus with the new 5Ghz systems coming out, there will be some "cheap" 4Ghz servers that will be out on the second hand market before long. That will be soon enough for me to change the server.

     

    I think one of the other upgrades I will need to do is put in a SSD that will be an "unassigned drive" in the system, just to load the VMs from and run them from it. Although, I really do like the idea of a adding a new PCIe card that will handle multiple M.2 SSD drives. But not today, or this month. I have other important things to do... like make a backup image of all my server files. =)

  8. Tuesday, 26 MAY 2020 - nCOVID19 Edition, Day 71

     

    Still working at home remotely from my daytime job. Local area is pretty much shut down at the moment, as we remain a "hot spot" of local infections, some over 50% in local population testing.

     

    The past Western Digital "WD Re 4TB Datacenter Capacity Hard Disk Drive" has not had another single error, so I think it was the Windows 10 VM that gave it some "throwback" error in data.

     

    Replaced my router (I'm on Verizon DSL, which stinks!) and solved most of my networking issues by using a DLink DIR-1950 router. No issues with Plex or other passthroughs with it.  Speaking of the Plex (linuxserver.io) docker - it continues to work smoothly. Chromecasting 1080p with the V1.0 wifi unit is also eased up a lot. Have had a few issues with bandwidth and stability with the WIn10 VM running "BOINC" in the background. I think it's an issue of overall power consumption on the VM. It just doesn't like BOINC if I give it more than about 80% of the CPU clock and 80% of the CPU usage. I think the other Win 10 system level programs just have bandwidth issues when I do that.

     

    Still have Monitorr and Netapp running, and got around the one issue of showing more services in Monitorr. Still can only show 3 disks though, and the other limited data on the system. But for that, there is the Netapp, so... who cares.  Starting to pole around with the Home Automation (HA) dockers. Have lots of cameras & hardware for those items. But for now, I am working to get base network stability re-established.

     

    Hope everyone is staying inside and by all means - STAY HEALTHY & WEAR A MASK!

  9. Thursday, 29 APRIL 2020 - Cabin Fever Edition

     

    Still working at home remotely from my daytime job.

     

    The previous issues with a Western Digital "WD Re 4TB Datacenter Capacity Hard Disk Drive"  appears to be working fine. Zero errors since cable checkup and reboot. May have been due to a Windows VM I was running. So, maybe dodged the bullet there.

     

    Had some networking issues, and ended up bricking my TP-Link AC1750 router. I liked that thing. Will continue to see if I can "unbrick" it, but at this point, it won't even allow a TFTP link into it. Was trying to force a firmware update from OpenWRT. Had it working with DD-WRT, but it was a lousy firmware distro and gave me all sorts of issues. Thankfully, it was a Goodwill find, so its only $13 lost if it is "bricked."

     

    Got Plex (linuxserver.io) docker working more smoothly. Also was even able to Chromecast 1080p to a V1 wifi unit, and it looked good on the 1080p HDTV I have. "Lagginess" went away when I found that you can adjust the number of CPU Cores/Threads within the docker menu on the "CPU Pinning Docker" tab on the CPU settings on teh dashboard (e.g. https://tower.local/Dashboard/CPUset ). Much love & appreciation to whomever coded up that little helper - very clean and easy. Set my Plex to four threads as a default, and boom - no more lag. Didn't seem to use up any more CPU cycles... but I will be watching that. Nice bit is that it looks like you can adjust VMs and other programs just as easily.

     

    Also have Monitorr running, which is a nice dashboard once you get it set up. (hint, set the /disk1/ as /../mnt/disk1/, see image attached to get the added disks included. If anyone knows how to add more services than what the docker allows, please - give me a reply! Could only show a few services and only 3 disks... not sure why that was so limited. Must be a setting I am missing.)

     

    The BOINC software in a Windows 10 WM continues to chuck out computations for CoronaVirus folding daily. Glad I can give something back.

     

    Hope everyone is staying inside and by all means - STAY HEALTHY & WEAR A MASK!

    Screenshot_6a.gif

    Screenshot_4.jpg

  10. Wednesday, 21 APRIL 2020 - STAY AT HOME EDITION!

     

    I am still working at home remotely from my daytime job, and mostly continuing to do minor maintenance with unRAID 6.8.3.

     

    I ran into some interesting issues with a Western Digital "WD Re 4TB Datacenter Capacity Hard Disk Drive" (7200 RPM Class SATA 6Gb/s 64MB Cache 3.5 inch WD4000FYYZ) recently. It came up with a couple of read errors, which I think are cable interface issues. So I'll have to crack the case to see "what's up" soon. Smart Drive Report only shows "Extended offline Testing - Completed without error", but it had an earlier error of "READ FPDMA QUEUED" - which was dated long before I precleared & reformatted the drive. So, it's just something I will continue to watch for in the future. UNRAID said it recovered from "read" errors it had, and the drive appears to work well otherwise. So, I will see how it goes. I've currently only got a single Win 10 VM on it, and have that backed up separately, just in case. I also looked at it with the diskspeed docker app, and it appears to be working within expected read/write of all my other drives. It is in the hard drive "extension" that I added to the system, so it could be a power handling issue... more to follow up on with that later on.

     

    (Late add:  I really need to add a RAID 1 m.2 nvme SSD for VMs, and get them off the cache and shares. I have a spare 4x PCIe slot, so that should provide power and enough space for anything I could come up with to run on a remote desktop. Am guessing that's at least a $150 add to the system when I tally it all up. 2 nvme + 1 interface card)

     

    Plex (linuxserver.io) threw a small hissy fit when I upgraded to the latest docker image (Version 1.19.1.2645), but stopping and restarting the docker seems to have fixed issues.  It does seem a little more "laggy" at start up, so the cache and other database information may just need to "settle" to get it back to running it like normal. And these days, Dockers keep me busy for the most part. And I am having a fair bit better performance with it running MP4 encoding vice MKV encoded files. MKV is slightly smaller, and has "ok" versatility over a number of devices I broadcast to, but is not as versatile or flawless in playback as MP4.

     

    I am also trying to read up and understand how letsencrypt docker works, however.  I need to watch some videos for that. So, just to be clear - I am running 95% as a local network NAS only. I have a couple of VMs that I come in via Chrome Remote Desktop, and Plex (lifetime subscription) that I use from remote locations - but I don't need (or want) a website running. I would like SSL certificates to be resolved correctly, and maybe address the VPN issues, but its not something I loose sleep over. And I just don't want my server hacked. I could attach it to a website I have (.com addy, where I own the domain and can access the DNS record, so I could make it nastyfox.blahblahblah.com), but again, I don't really 'need' that functionality. And if I did set it up, I'd want RSA/AES 256 encryption with a 30 character long random password - as a bare minimum.

     

    And BOINC in the Windows 10 WM continues to run well. Still very simple software install to do protein folding in the hopes of finding vaccines for nCOVID19.  I did load MacinaBox, but not made a VM yet. I need to do that. No problem with getting a copy and installing it.

     

    Hope everyone is staying inside and by all means - STAY HEALTHY!

  11. Wednesday, 08 APRIL 2020 - Nothing much new.

     

    So, mostly minor maintenance with unRAID 6.8.3. I am working at home remotely from my daytime job, so that keeps me busy for the most part. during the day. In between, I am loading up my Plex library (linuxserver.io) with movies ripped from the DVDs we have, and make the occasional over the air (OTA) TV recording from the HomeRunHD Duo on the network. Mostly doing small stuff. I did install BOINC in a Windows 10 WM and ran that for a few "quadrillion" cycles. Simple software install to do protein folding in the hopes of finding vaccines for nCOVID19. I run my VMs with Chrome Remote Desktop software, and am able to that on anything from my iPhone 7, Chromebook, HP desktop or Dell Laptop.

     

    I did hear that MacinaBox was not available on CA for some reason. I still grabbed a copy anyway and installed it.

     

    Also became an Administrator on the "unRAID Family" group on facebook. (Link here) It's a good group, with some good insights - and some very needy people looking for advice.

     

    Hope everyone is staying inside and by all means - STAY HEALTHY!

    • Thanks 1
  12. On 3/21/2020 at 11:30 AM, GPL said:

    Hi all, 

     

    First time poster. I recently dove into the world of IT last year and made a career change from like 15-18 years of sales with the intention of eventually ending up in Cyber Security.(Just some background) It’s something I’ve been wanting to do for so long. I picked up my first server for FREE from my SAAS job when we were moving offices 4-5 months ago. T310 !! I can’t begin to tell you how great this thread is. I’ve read every single post ! I know I want a plex server & I want this to be the central of my home lab. I also wanted the capability to do some VM’s. I randomly stumbled on to this forum doing random google searches late at night earlier this week. 

     

    Thank you for all the updates, you’ve inspired me and given me a lot of direction. I’ve even read things I didn’t think I’d want but now I do haha ! 

     

    You are appreciated @rollieindc and everyone else.   

    Hi GPL!

     

    Thanks for the shout out! Much appreciated! You’re (and fellow T310 users) exactly why I wrote all those posts.  The Dell T310 is a pretty solid platform for a modest set of user needs.

     

    My three regrets,

    - the choice of 3 add in drive bays on top (I’d suggest something sturdier and trayless)

    - nVidia graphics card not working in VMs

    - not using OpenVPN (now much easier with 6.8.3 working inside of dockers) 

     

    If you get a nVidia graphics to work in a VM, you gotta promise to share. I bet I’m just missing something trivial, and I’m still wanting to try that one fix offered previously- but since getting a cheap radeon to work, I had other priorities to focus on (like adding terabytes, working from home - avoiding nCOVID-19, and running BONIC to rosetta@home in a VM!)

     

    Cheers, & welcome to the club!

    • Like 1
  13. Decided to wait a bit to make sure that there were no major issues with the release.  Then the Novel CoronaVirus-19 hit, and I had to catch up on moving my operations home from my work office. 

     

    Long story short, downloaded the update, stopped my VMs, stopped my Dockers, updated Plex (linuxserver.io) and then stopped the array & rebooted.

     

    Everything restarted just fine. - Thanks Guys!

  14. 22FEB2020 UPDATE

     

    Server continues to  run fine since the update to 6.8.2. Did have the opportunity to increase storage, and added two 4TB WD Re enterprise drives, replacing the pair of 600GB Cheetah drives I had. Since I wanted to test out the robustness of the parity drive, I decided to pull the drive and "cold swap" them, allowing the new formatted drive to rebuild. This worked out rather well, and the drives rebuilt the "new" 4TB drive with zero errors in about 6 hours - and allowing for the 3.4TB of additional storage space. Since I have some extra 4TB WD Re enterprise drives, I will create a couple of "hot swappable/cold storage - ready spares" and will also be adding a second parity drive to the system for added drive protection. It was interesting to remove the drive, reboot the system, and see that the data on the removed drive was still available through the "emulated" drive capability enabled by the parity drive.

     

    My Plex & VMs continue to run consistently and without any issues. I continue to update the Plex docker (now at Server Version 1.18.7.2457), and that seems to be working fine. And it's really nice to be able to access the media on the server when I am away on travel.

  15. 15FEB2020 UPDATE

     

    Server has been running fine since the update to 6.8.2. Plex & VMs are running consistently and without any issues. Updated the Plex docker (Now at Version 1.18.6.2368), and that seems to be working fine. And since I am away from home on travel next week, I am going to leave the configuration unchanged.

  16. Updated from 6.8.0 to 6.8.2 - Spun down all the VMs and Dockers first. Went well. No issues with Plex docker (upgraded it too!) Had one issue with the Windows 10VM, but after resetting the GPU and Chrome remote desktop interface, it worked fine again. Thanks!

    • Thanks 1
  17. On 1/18/2020 at 10:12 AM, BuHaneenHHHH said:

    I used Plex docker for a period of time but noticed that it while playing videos from my server on my home network are not very smooth.

    Just a note here, that using the /tmp for RAMDISK enabled my transcription and overall playability with Plex to be a lot smoother. Even with lower RAM available, I think this is still a wise thing to enable on any unRAID system for these kinds of issues.

  18. 01FEB2020 Update - And upgraded to 6.8.2

     

    So I upgraded from 6.8.0 to 6.8.2, and as usual, my Windows 10 VM RDP is "dead" (unreachable by Chrome RDP) again. No idea why this happens. This seems to be some weird Windows 10 update issue that causes the VM to be unreachable through the Chrome RDP. Annoying, but if I go back in and rebuild the image, it comes back again.

     

    Otherwise, the system has been mostly rock solid. Drives seem happy, and the system temps have all been reasonable, including inside the bays and trays. Might add one more case fan just to reduce the temp a bit more. In the OS upgrade, the Plex migration was a bit of a hassle, but I also added a Silicon Dust HomeRunDR Duo Network TV system, and Plex seems perfectly happy to program and record local over the air (OTA) HD content. I have tried running the BEETS docker app to sort my music library, and am just getting annoyed by it rather than finding it to be helpful in finding anything in the indexs that make the music playable or searchable.

    Screenshot_6.jpg

    Screenshot_7.jpg

    Screenshot_5.jpg

  19. On 1/18/2020 at 10:12 AM, BuHaneenHHHH said:

    Just thought I would share this info with you as you are facing some problems with your Plex server.

    Thanks for sharing back!

     

    I think you looked at a bunch of problems very systematically, and I like the lower bay drive cage adapter. That is very cool. Will keep that in mind if I need to add more drives.
     

    And yeah, I always update my NIC card Firmware first thing after installing then. Been bitten by that issue far too many times. 

     

    Emby sounds like a better solution for your set up. And for now, I am sticking with Plex in a docker. I solved most of my issues (remote access, stutter, etc.) with changing the NAT tables in my DSL modem and router.

     

    You might also consider trying Chrome Remote Desktop. I had been using teamveiwer, and sure enough- their “claim“ was I was using it for commercial purposes- and locked me out of Remote connections into my own server before I could refute it. I then had to argue that I wasn’t, before they did anything, which was 72 hours later- and caused me issues while on travel. No weekend support either. Well, teamviewer is in my dustbin now, and won’t be reinstated until I see a better product than Chrome RDP.


    I have been thinking about putting a windows VM on a separate SSD, and may still do that. But for now, my windows images seem snappy enough sharing the cache SSD. 

     

    Am surprised you didn’t stick with unRAID as the base OS, but if what you have works- good for you. 

     

    Stay in touch!

  20. 01 JANUARY 2020 - HAPPY NEW DECADE

     

    So, the Dell T310 has mostly been stable, without much in the way of issues. Updated to 6.8.0 - and so far, so good. Drives are all up and with zero errors, well within temperature tolerances (less than 100*F). My two main issues have been the Plex Docker image, and the Windows 10 VM.

     

    So the Plex Media Server docker (PlexInc version) runs for the most part well, and I added a SiliconDust HomerunHD Duo to be able to watch and record a couple of local stations I can't get on my DirecTV. But - I am still struggling with Plex being "in and out" of the remote connectivity part of it. I have it set for Port 32400, manually, and forwarded the port through my router - but for some reason, the connectivity drops every so often. I tried various fixes (uPnP on/off, manual port forwarding, etc) but nothing seems to prevent the drop outs. The system will sometimes "heal" the issue, but at other times - I got nothing. Starting to consider a Arch or Mint Linux VM to run Plex in, rather than the docker. I keep getting this weird feeling like the Plex Docker is not getting enough resources to run properly, and as a result, drops the remote connection.

     

    The Windows 10 VMs are still being a persistent bugger too. Even with the AMD Radeon R7 240 2G Low Profile/Low Power video card installed - the VM gets lodged in this weird "broken" state. I am unsure, but I think part of it is the Windows 10 system trying to automatically upgrade the ethernet or video drivers. And of course, when that happens, I have to rebuild the VM from scratch - because no amount of tinkering will allow me to get the remote desktop back with teamviewer, Chrome remote desktop, or even the VNC (with the video controller changed back to the default setting.) For now, I have "updates" disabled, but am quite certain that some day soon - they are going to "whack" my system and have it go offline again.

     

     

    Screenshot_1.jpg

  21. So, I did not post this view, but it has my curiosity up... what are others’ thoughts on this view? (I have issues with it, but appreciate perspective if others). 

     

    • ”NAS drives are for qnaps etc proper Nas devices (while) unraid was designed around the Idea of using a bunch of desktop hard drives together with redundancy for failure.  I personally use shucked drives (that are) cheaper and just as good as a (bare) drive.”
  22. 07 DECEMBER 2019 - PEARL HARBOR RECREATION ENACTMENT ON MY SERVER BY TEAMVIEWER

     

    I started using TeamViewer remote desktop because it worked fairly well. I only had my one server, and I am not running it for a commercial service in any way shape or form. (I work for the government, and they frown on such things.) However, just moments ago as I was trying to resolve an issue with my Windows 10 VM, the software popped up with a "We're taking away your connection" ransom note. I thought this was a joke, but this is EXACTLY why I had seen so many others saying that TeamViewer was no longer their preferred system. Now I see why. Right in the middle of a effort, a "ransom note" - pay up, or we're turning off your ability to use your VMs. No if's, and's or but's. No way to contact anyone. No email. No chat option. You have to pay, or no more access. Pretty much a "F*ck you" by the TeamViewer team.

     

    Sorry, NO ONE deserves this kind of treatment. Ever. So, "F*CK YOU TEAMVIEWER." If anyone comes into my office saying that they use the software for a required job in order to input data - I will now (physically) throw them out of my office, terminate their contract with me, and consider them "Non-conformal" to stated performance and security requirements.

     

    "TEAMVIEW IS BULLSH*T."

     

    Screenshot_X.png

  23.   

    4 hours ago, jonathanm said:

    You may want to take a look at @rollieindc setup, I believe he's got the same dell server.

    Thanks for the handover @Jonathanm! 

     

    Ok, first, the system will boot on 2GB - but you will definitely want to get more memory. (And I have 8GB if you want to buy or trade for it. I upgraded to 32GB, and not going back.) 😃 At 2GB, you can't do much, but it's enough to "play with" unRAID.

     

    Next, you can boot unRAID in the T310 from the internal (or external) USB. I know, I do it with mine. (See >My first hobby “TOWER”< postings and updates. Have lots of photos of my system for other to follow.)

     

    Here is my suggestion: Put the USB key into the inside or front USB port BEFORE powering up the system. As it starts, press the <F11> key to get into the BIOS setup menu. (You do not want the iDRAC or RAID menus!) Once into the BIOS screen, set the boot mode to "BIOS" - not UEFI. Then the boot field selector should provide for the USB as a location of the operating system files for startup - and you have to move the specific USB up (using +/- keys) to the top of the boot list. One thing to note, that the make/kind of USB drive is also important, and it must be a bootable drive type! I tried a "non-standard" (non-bootable) drive, and the drive choked repeatedly (not unlike yours). After rebuilding unRAID on a better USB drive that I had, it booted without issue. 

     

    Important Note: IIRC - If you move the USB drive in the T310, then you need to change the boot drive in the BIOS! The T310 server treats the internal, external front and external rear as separate, unique drive location options.