emersonicus

Apparently is has something to do with i801_smbus si there a possible to fix this by deactivating i801_smbus? root@NAS:/mnt/user/Downloads# dmesg | grep 'Flags mismatch' [ 153.614390] genirq: Flags mismatch irq 16. 00000000 (vfio-intx(0000:01:00.0)) vs. 00000080 (i801_smbus) EDIT: I added this to Syslinux cfg intel_iommu=on modprobe.blacklist=i2c_i801,i2c_smbus nows its working.

I tried to update the FW and still the same problem prevails. Can i just use the NICs without passthrough? will there be any major differences?

Output: root@NAS:~# lspci -vs 1:00.0 01:00.0 Ethernet controller: Mellanox Technologies MT27520 Family [ConnectX-3 Pro] Subsystem: Mellanox Technologies MT27520 Family [ConnectX-3 Pro] Flags: fast devsel, IRQ 16, IOMMU group 10 Memory at 81200000 (64-bit, non-prefetchable) [disabled] Memory at 6016800000 (64-bit, prefetchable) [disabled] Expansion ROM at 81100000 [disabled] Capabilities: [40] Power Management version 3 Capabilities: [48] Vital Product Data Capabilities: [9c] MSI-X: Enable- Count=128 Masked- Capabilities: [60] Express Endpoint, MSI 00 Capabilities: [c0] Vendor Specific Information: Len=18 <?> Capabilities: [100] Alternative Routing-ID Interpretation (ARI) Capabilities: [148] Device Serial Number e4-1d-53-03-00-37-b6-bf Capabilities: [108] Single Root I/O Virtualization (SR-IOV) Capabilities: [154] Advanced Error Reporting Capabilities: [18c] Secondary PCI Express Kernel driver in use: vfio-pci Kernel modules: mlx4_core

Yes, according to the logs it’s bound successfully and the 01:00.0 is the Mellanox dual nic card which I want to passthrough.

Hi, Indeed, it was on PCI_E3. I switched it now to PCI_E1 and now im getting error when trying to start the VM with the card. Thanks!

Hi guys, I tried guides here and tried to search for a solution, but all are not working. When I try to bind only the Mellanox card it auto selects the Realtek NIC also. I tried to edit the vfio-pci.cfg manually and delete the Realtek NIC but when unraid boots, no NIC available only loopback using 'ifconfig'. I also tried ACS settings but still the same cant passthrough the Mellanox card. Do i miss something or does it not work mit my setup? MOBO: MAG B460M MORTAR CPU: i5-10400 Thanks! tower-diagnostics-20230108-1836.zip

Hi guys, I have a problem with Fan Auto Control. My MB: MSI B460m with community driver installed for nct6687. Unraid: 6.9.2 When I press detect it shows: How can I make this control work? Fans are in full power. Regards.

I had this problem I changed the domain to Unraid ip and port in order to show the images PHOTOVIEW_PUBLIC_ENDPOINT: http://IP:8694/

Thank you this worked well!

I already tried this but somehow the port still does not change. jDownloader jackettVPN: It only works when I use in jackett the 8080 port.

Hi, I installed the jDownloader2 and tried to route it to the VPN container through --net=container:jackettvpn everything works but the only issue I have is how can I change the jDownloader port from 8080 to 8686 while routing it to another container? I tried to search for a solution but somehow I cannot change the jDownloader port. Regards!

Hey, Sorry, I could not update you sooner as I was preoccupied but all I can say as for now its holding and no crashes at all. I will keep monitoring thank you again!

Thanks, this solved the problem

Yes, i tried it with heaven benchmark for 20-30 minutes and didnt crash once. I am willing to test a custom image with the drivers builtin if there is a guide or hint how to do so. TY!

Hi, yes i am not running both at the same time only run VM once with out the nvidia plugin just to check if the GPU is faulty after I checked that is not a GPU problem, I deleted the VM and installed nvidia plugin and or docker transcoding in plex and it works. I observed when plex is transcoding and tdarr also then suddenly the random crashes appears. Maybe that is correlated to the problem?

Yes I tried many times to reboot and reseat the gpu once. I also tried to use the GPU in VM and everything worked fine not crashes but when I switched it as a transcoding gpu it works then crashes randomly while watching in plex.

Hi, I am currently running 6.9-rc2 with a GTX 1050ti transcoding works but somehow after a few it crashes and it says under the nvidia plugin panel: Unable to determine the device handle for GPU 0000:01:00.0: GPU is lost. Reboot the system to recover this GPU log: Jan 25 23:18:36 iNAS kernel: NVRM: GPU at PCI:0000:01:00: GPU-86d42cfe-6f24-1e3c-9422-454ce39a29b6 Jan 25 23:18:36 iNAS kernel: NVRM: Xid (PCI:0000:01:00): 79, pid=22174, GPU has fallen off the bus. Jan 25 23:18:36 iNAS kernel: NVRM: GPU 0000:01:00.0: GPU has fallen off the bus. Jan 25 23:18:36 iNAS kernel: NVRM: A GPU crash dump has been created. If possible, please run Jan 25 23:18:36 iNAS kernel: NVRM: nvidia-bug-report.sh as root to collect this data before Jan 25 23:18:36 iNAS kernel: NVRM: the NVIDIA kernel module is unloaded. lspci -k 01:00.0 VGA compatible controller: NVIDIA Corporation GP107 [GeForce GTX 1050 Ti] (rev a1) Subsystem: Micro-Star International Co., Ltd. [MSI] GP107 [GeForce GTX 1050 Ti] Kernel driver in use: nvidia Kernel modules: nvidia_drm, nvidia 01:00.1 Audio device: NVIDIA Corporation GP107GL High Definition Audio Controller (rev a1) Subsystem: Micro-Star International Co., Ltd. [MSI] GP107GL High Definition Audio Controller Does anyone encounter this problem? TY. inas-diagnostics-20210125-2321.zip

hi, this is my USB stick which I also tried. its 8GB and it appears in UD page but when I insert the 8TB external nothing shows in UD page.

hi, I recently purchased Seagate 8TB external hdd and connected it to Unraid through USB and now Its now showing up but my 2 TB Seagate shows up. Does this means it can only support a certain capacity? TIA! inas-diagnostics-20201223-1052.zip

+1

I have the same issue.

I have a question I can now access unraid through nas using zerotier. If i assigned manually to plex (10.0.0.75) a different IP from the host (10.0.0.50) how can I access plex? Does is only work if its on the same unraid ip or there is another way? thanks!

Hi, I just install nextcloud with mariaDB. My problem is it takes 2-3mins to load the webUI. Do I have to do any special settings? thanks!

bump.

Hi, I am trying to get over my cgnat problem and people suggested online to VPN tunnel to a server with a public IP. Now, I was able to connect from my pfSense to the raspberry pi with PiVPN. How can I make the duckdns validation? /etc/openvpn/server.conf dev tun proto udp port 1194 ca /etc/openvpn/easy-rsa/pki/ca.crt cert /etc/openvpn/easy-rsa/pki/issued/cert.crt key /etc/openvpn/easy-rsa/pki/private/key.key dh none topology subnet server 10.8.0.0 255.255.255.0 # Set your primary domain name server address for clients #site to site vpn route 10.0.0.0 255.255.255.0 10.8.0.2 push "route 192.168.2.0 255.255.255.0" client-config-dir /etc/openvpn/client #pi-hole push "dhcp-option DNS 10.8.0.1" #push "dhcp-option DNS 1.1.1.1" #push "dhcp-option DNS 9.9.9.9" # Prevent DNS leaks on Windows push "block-outside-dns" # Override the Client default gateway by using 0.0.0.0/1 and # 128.0.0.0/1 rather than 0.0.0.0/0. This has the benefit of # overriding but not wiping out the original default gateway. push "redirect-gateway def1" client-to-client keepalive 1800 3600 remote-cert-tls client tls-version-min 1.2 tls-crypt /etc/openvpn/easy-rsa/pki/ta.key cipher AES-256-CBC auth SHA256 user nobody group nogroup persist-key persist-tun crl-verify /etc/openvpn/crl.pem status /var/log/openvpn-status.log 20 status-version 3 syslog verb 3 #DuplicateCNs allow access control on a less-granular, per user basis. #Remove # if you will manage access by user instead of device. #duplicate-cn # Generated for use by PiVPN.io /etc/openvpn/client/vpn1: push "route 192.168.2.0 255.255.255.0 10.8.0.1" ifconfig-push 10.8.0.2 255.255.255.0 iroute 10.0.0.0 255.255.255.0 Sometimes I can ping the pfSense from the PiVPN but not vise versa. Should better opt to try SSH tunnel instead of OpenVPN site to site? If you need more information just let me know. All suggestions will help! Thanks.