Geran

Thank you.

So I am in the process of shrinking my array due to two bad drives, and I am curious if I can abort the script and just remove the drives and rebuild parity instead because the script method has been running for almost 4 days (14 TB drive) now on the first drive, and I can't tell how much longer it will be.

Thank you for that. I checked the cables/connections and they were fine. I tried to run SMART tests on drive 13 and 14 and they both came back as “Failed in segment” and never completed the tests. Furthermore, I am going to assume they are bad/dead and need to be replaced. Thanks again for your suggestions.

Thank you. Didn't realize it made that a link after I posted.

So my Parity Check started last night at 11pm Eastern. I checked it today, and it is going extremely slow for some reason compared to before. The last parity check a month ago took roughly 30hrs. Nothing has changed since the last parity check. Anything I should look into, and how do I get diagnostics to post them here for people to review? Diagnostics attached coruscant-diagnostics-20240429-1725.zip

Hi, I don't see a list of port forwarding servers in the supervisord.log. How can I get it to show there?

This is the post I'm trying to replicate:

Hi, I'm trying to set up the 36 drive bay like you did in a previous post. I set my columns and rows as in your example and I get the following: Any help would be greatly appreciated.

Thank you. That's what I originally did after removing the test tag but I just did it again and it is working now.

Good morning. So I removed the test tag as recommended and add the new next-gen ovpn config file as well. It is still having trouble connecting. My log file is attached and it keeps saying the following: 2020-09-29 07:58:02,701 DEBG 'start-script' stdout output: [info] Checking endpoint 'ca-toronto.privacy.network' is port forward enabled... 2020-09-29 07:58:17,487 DEBG 'start-script' stdout output: [warn] PIA endpoint 'ca-toronto.privacy.network' is not in the list of endpoints that support port forwarding, DL/UL speeds maybe slow [info] Please consider switching to one of the endpoints shown below 2020-09-29 07:58:17,487 DEBG 'start-script' stdout output: [info] List of PIA endpoints that support port forwarding:- [info] ca-toronto.privateinternetaccess.com [info] ca-montreal.privateinternetaccess.com [info] ca-vancouver.privateinternetaccess.com [info] de-berlin.privateinternetaccess.com [info] de-frankfurt.privateinternetaccess.com [info] france.privateinternetaccess.com [info] czech.privateinternetaccess.com [info] spain.privateinternetaccess.com [info] ro.privateinternetaccess.com [info] israel.privateinternetaccess.com [info] Attempting to get dynamically assigned port... deluge log 9_29.txt

What servers are people using and getting good speeds? I'm using CA Montreal and seeing between 1-2 MiB/s

Thank you for the reply. I guess if I want to use a different board, I need to reach out to ASRock to see if there is a special BIOS for that board specifically.

@Hoopster, What BIOS version are you on the AsrockRack board? None of them show as having support for iGPU or is it that all C246 chipset AsrockRack boards support iGPU?

Hi, So I tried this and everytime I turn on Hardware transcoding it kills the Plex Media Server application.

So I have a Xeon E-2176g and Supermicro X11SCZ-F motherboard. Reading the first post, it mentioned that if the board has IPMI than it getting Quick Sync to work wouldn't be possible. I'm assuming my configuration falls within that category and if it does, is there any way to get it working?

What CPUs are people using and what is the average time it is taking you to convert files?

Well I thought I figured it out but I don't have any of the options in the first post. I must be doing something wrong.

How do I load this docker?

What PSU would you guys recommend for 24 non-green drives (7200rpm)?