skjonnemand
-
Posts
28 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by skjonnemand
-
-
On 1/20/2023 at 8:58 PM, kim_sv said:
With Unpackerr or some other container? I have other instances of it still running though..
Ive got a version of golift/unpackerr which is running my radarr and sonarr.
then i have installed a version of hotio's unpackerr which is used for my version of radarr which is handling my 4K movies.
The version of hotio's unpackerr is giving me the same error as you got. I have tryed reinstall the docker, tryed to see if i could go back to an older version or anything but i cant get it to work again.
Ive also tryed to install a 2. version of the golift/unpackerr but that version wont even start.
-
Im getting the same error now..
-
Hello
My syslog is about to be full again. @JorgeB you advised me earlier to move my cache 2 drive to another slot in my Dell SC220. i did move it to another slot and removed the second SAS cable from my SAS controller to my Dell SC220.
Can anyone confim that the problem is still the same and give me any advice what to do next?
-
11 minutes ago, JorgeB said:
Try a different slot for the SSD, if issues persist try a different SSD.
Ok thanks ill try that to begin with.
-
On 8/18/2022 at 12:14 PM, JorgeB said:
Problem with cache2 device, check/replace cables.
Hey JorgeB
Sorry for the late reply. Its the same cable for all my drives except disk sdd thats a 3.5" drives.
All other drives are 2.5" and is mounted in my Dell SC220. They are all connected via 2x Dell cables with SFF-8644 connectors in each ends. Im not sure if thats the problem that the Dell SC220 is mounted with 2 cables in port A and B when all the disks is only sata drives.
-
On 8/16/2022 at 5:09 PM, JorgeB said:
Nothing obvious spamming the log, is it already filling up?
Hello again
I see the syslog is beginning to fill up again and just went from 1 to 3%. There are some errors and alot of system messages about some missing drivers i dont understand.
I hope someone can help me out here.
-
no its still at 1 %..
but i did find that my vms is gone. I may by mistake have deleted my vms when i was cleaning up my vms. I my have got 2 vms which was pointing to the same image.
is there any chance to recreate that vdisk file?
-
hello again.. sorry for the delay. Somehow the server crashed and i could not get in touch with the computer.
I had to unpluged the power after i got home from work. The computer has rebootet now and it seems to be working again.
I would appreciate if someone could tell me why my syslog is filling up all the time.
-
Hey
i restarted my server because my syslog file was full and wanted a fresh log to post. But now i cant start my unraid server. Nothing is happening when i push the Start array botton.
I tryed to clean the cache and cookies from Google Chrome
-
11 minutes ago, wgstarks said:
Just enter this in the repository field-
binhex/arch-radarr:3.2.2.5080-1-01thanks..
-
15 hours ago, haakony said:
Latest update "corrupted" my db
Seems like the docker has updated to a major update from binhex/arch-radarr:3.2.2.5080-1-01 to binhex/arch-radarr:4.0.4.5922-1-01
I had to rollback to binhex/arch-radarr:3.2.2.5080-1-01 for it to work again
My radarr has gone down too.
How did u make the rollback?
-
I updated the bios to the latest version and set everything in the bios to default. My ram is down to 2133 and I now get this error "Machine Check Events detected on your server" Your server has detected hardware errors. You should install mcelog via the NerdPack plugin, post your diagnostics and ask for assistance on the unRaid forums. The output of mcelog (if installed) has been logged.
I have posted the log
-
After installing a Nvidia 960 my server has become really unstabile. I have tryed alot of things not to try understand why it is somehow crashing all the time. There is no pattern when or why the server crashes. after some time when i try to login again there is nothing here to connect to.
Ive change unraid from the 6.9 beta to the official 6.9 version. I have unpluged the Nvidia 960 again. I have unpluged 2 ram slots to see if they are the problem.
im thinking of changing the usb pen but i dont wanna change it if thats not the problem.
can anyone tell my what is the problem with my unraid server
-
Ohh thank you
-
8 minutes ago, Squid said:
Check the QVL before doing anything
QVL?
-
what do you recommend i do? that i change the cpu to a ryzen 7 2700x or even better a 3700x or will the problem be the same as long as i still use the same memory?
-
-
Ram is not overclocked. they are running at 2133 mhz if i remember.
-
Hello
My unraid server is telling me i have hardware errors. Im not sure where and what to look for. I hope anybody can tell me what is wrong.
-
omg i used all night yestday to get it working and somehow i most have missed all about the PlopKexec.
I followed your guide and it took me no time to install it.
I thank you very much for your time
-
35 minutes ago, doron said:
I'm running Unraid 6.7.x. Is there a reason you are installing a backward version?
Can you tell me how you installed the 6.7.x version? I installed the latest 6.7.2 on my flash drive. But i think somehow the downloaded files from the first page overruled the usb.
-
Hello guys i just installed unraid 6.2.3 on a IBM X3550 M4 server with Esxi 6.5U2. I used the method with making a fresh unraid usb key plugged it into the server and created a unraid vm in esxi. I then attached the downloaded vmdk i downloaded from the link from the first page and attached it to the vm as a hdd.
I then booted up the vm and got a trail key but now im running into other problems with installing CA.
Now im trying to install Community Application but i get an error that Unraid version is too low. require at least version 6.4.0. How do you guys install CA?
-
Im thinking of have i done it all wrong. Should i have asked the guy from Hetzner to just make a 16 GB usb drive.
If that is possible i could install the unraid software to the usbdrive by myself and make it bootable.
-
Yes i thought they could that that but after i send it and contacted them because now nothing was working. They told me they could not make it bootable. somehow i need to do that by myself.
I have installed a version of unbuntu now and i can see the usbdrive. But it is not showing up as a usbdrive on the desktop. It looks more like a cdrom or something. So now im really confused.
When i try to run the command "sudo bash" and copy the file from where i unzipped it to the terminal. it is now saying "FAIL There appears to be no drive present with the label UNRAID, aborting"
It was not called UNRAID from the beginning. I have changed the display name but it is still not working.
Unraid keeps saying that there are updates for some docker containers - but then either fail or keeps updating and updating
in General Support
Posted
hello everyone
the past days ive been having some problems with my unraid server. I is telling me that ive have some updates for swag, binhex-krusader and Photoprism. but when i try to update the container it either locks up the server when the update is going on and fails after some time or keeps saying that it has an update for the same container.
Can someone tell me whats wrong and how to fix it?
barebone-diagnostics-20231013-1402.zip