un4given

Hi, thx for sharing. What PSU are you using? Do U have a HBA for the drives, or directly connected to the SATA ports of the board?

Hi All! Switched recently my build from Ryzen 9 5900x hoping to get less power consumption but was pretty disappointed with the results. I5 10400 ASRock B560M Pro4 16GB (2x8) 2666 non ECC Ram Corsair R550X PSU 3x 18 X18 TB Exos 2x 8 TB WD 1x 1TB NVMe for Docker - always running 2x 500GB SSD Pool - spun down when not needed 2x 500GB SSD Pool - spun down when not needed 1x LSI HBA 9270-8i 10G RJ45 XG-C100C Adapter In idle with all disks spun down I get 60-68 Watt from the wall While using Plex the consumption rises to 86-100 Watt. Tried using powertop autotune, but it didn't seem to help. Slowly I think that 68 watt is best I can get. With Ryzen 9 I had 80-90 Watt in Idle.

sory, but i figured it out. it is an unraid issue. after i downgraded back to 6.9.2 the speeds went back to full write speed of 1gbit...gonna check out if 6.10.3 will do the deal, otherwise revert back. so 6.10 somehow borked the write speeds to cache drives. found other users on reddit complaning. p.s. went to 6.11 rc4 and having no issues there. full expected write speed of 60-70 MB/s

Thx for the responses. But this is the funny thing. I doubt it's laptops fault. Over WiFi 6 Laptop to ISP - 500mbit Laptop to Other Devices on the Network - 1gbit Laptop to Other NAS - 1gbit Laptop to Unraid - 100mbit while writing/reading to/from SMB share So is it really my laptop? If it is, why 1gbit to other NAS (Synology)? This is the point where I am trying to solve a riddle. P.S. going to use iperf now and see what comes out To Unraid [ ID] Interval Transfer Bandwidth [ 4] 0.00-1.01 sec 16.0 MBytes 133 Mbits/sec [ 4] 1.01-2.00 sec 13.0 MBytes 110 Mbits/sec [ 4] 2.00-3.00 sec 13.9 MBytes 116 Mbits/sec [ 4] 3.00-4.00 sec 14.8 MBytes 124 Mbits/sec [ 4] 4.00-5.00 sec 14.6 MBytes 123 Mbits/sec [ 4] 5.00-6.00 sec 14.5 MBytes 122 Mbits/sec [ 4] 6.00-7.00 sec 10.8 MBytes 90.1 Mbits/sec [ 4] 7.00-8.00 sec 10.6 MBytes 89.0 Mbits/sec [ 4] 8.00-9.00 sec 10.1 MBytes 85.1 Mbits/sec [ 4] 9.00-10.00 sec 11.5 MBytes 96.2 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth [ 4] 0.00-10.00 sec 130 MBytes 109 Mbits/sec sender [ 4] 0.00-10.00 sec 130 MBytes 109 Mbits/sec receiver To another Windows Maschine [ ID] Interval Transfer Bandwidth [ 4] 0.00-1.00 sec 13.6 MBytes 114 Mbits/sec [ 4] 1.00-2.00 sec 18.8 MBytes 157 Mbits/sec [ 4] 2.00-3.00 sec 16.8 MBytes 141 Mbits/sec [ 4] 3.00-4.00 sec 19.1 MBytes 161 Mbits/sec [ 4] 4.00-5.01 sec 9.00 MBytes 74.5 Mbits/sec [ 4] 5.01-6.00 sec 16.0 MBytes 136 Mbits/sec [ 4] 6.00-7.00 sec 17.6 MBytes 147 Mbits/sec [ 4] 7.00-8.00 sec 16.5 MBytes 139 Mbits/sec [ 4] 8.00-9.01 sec 15.8 MBytes 131 Mbits/sec [ 4] 9.01-10.00 sec 8.12 MBytes 68.4 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth [ 4] 0.00-10.00 sec 151 MBytes 127 Mbits/sec sender [ 4] 0.00-10.00 sec 151 MBytes 127 Mbits/sec receiver P.S. iva got Intel AX200 Adapter on my laptop and those seem to have issues. Will maybe try to switch to another one. But i as still confused: why is speedtest.net showing 500 mbit?

Dear all, hope everyones well. I bought a new laptop recently after selling my Gaming PC (Windows 10 Pro 64BIt, Build 19044) and it uses Wifi 6. I was pretty sure the tranfer speeds to Unraid would be pretty fine, since the new laptop is situated near router (1-2 Meters) Wifi conncetion via Laptop. But i determined with regret, that transfers to and from server are 10-12 MB/second (100 mbit cap) I also have an Xpenology running and checked transfers to that server reaching 110-115 MB write and read speed. Also Speedtests to Internet show me full ISP speed 500/50. I also tried another Laptop with Wifi 5 and could get 60-80 MB to Unraid. I was writing to Unraid cache (NVMe SSDs) where i normally get the full speed. What am i missing? Why is WiFi speed to Unraid caping? Hope some1 will have an idea Have a nice Sunday

Hi @adminmat so did you succeed on your project?

Liebe Community, bin die letzten Wochen am lesen gewesen, um ein Überblick für mich zum Thema Unraid Backup via VPN zu verschaffen, kann aber keine eindeutige Lösung für meine Problemstellung ausarbeiten. Daher hoffe ich auf eure Wegweisung. Was habe ich vor? Ich würde gerne einen Remote Backup meiner Unraid Shares regelmäßig machen. Was ist vorhanden? Unraid Server bei mir im Haus QNAP NAS bei meinen Eltern im Haus Wie würde ich es machen? Unraid hat einen Wireguard Server am Laufen. Ich würde gerne die SMB Share von QNAP in Unraid UD mounten und dann mittels Luckybackup die Backups laufen lassen. Woran ich scheitere? Leider bietet die QNAP NAS kein Wireguard an, trotz des Updates auf QTS 5, da die NAS x86 CPU hat, und daher keine Unterstützung bekommen hat. Daher habe ich keine Ahnung, wie ich die QNAP zur Verbindung mit Unraid zwingen könnte? Eine Idee hätte ich noch: Wireguard als Client via Docker auf QNAP zu konfigurieren. Hat jemand einen ähnlichen Setup? Oder hat wer andere Vorschläge? Weiters würde ich die Dateien irgendwie verschlüsseln wollen, aber luckybackup bietet es nicht an? Oder? auf QNAP NAS habe ich die Laufwerke verschlüsselt. Würde es sicherheitstechnisch reichen? Duplicati man ich nicht mehr verwenden, hat gemischte Erfahrungen damit. Vielen Dank im Voraus!

Hi every1, Duplicati have been workign like a charm for me till 20 of march. now i get an Error Disk full. Path /tmp/dup-b on all of my backups. Dr. Google said i should clean up the tmp folder...but it is clean i have no files there. or am i in a wrong /tmp folder? i checked in root /tmp this settings i am using for backups any ideas what i am missing? SOLUTION: found a solution myself. changed in the web ui in Settings/Advanced tempdir command to a different location. Seems to work for now.

i am actually trying to add them in windows under explorer. i think i will try to setup Nextcloud and swag from the scratch. but i need to know what to do to be able to also delete the files if i connect the drive where nextcloud data is stored in windows.

i tried to map the webdav link in windows but i always receive an error that such address does not exist since my nextcloud is not exposed the address is https://192.168.0.XXX:444/remote.php/dav/files/USER/

thx, it should be a permanenet solution. i got lot of stuff auto uploaded from phone to nextcloud and i would need an option to sort those things, but not via nexcloud UI ;(

Hi every1, went through the whole thread but could only find some small hints towards my "problem" running nextcloud on unraid which is not exposed and not using letsencrypt for reverse proxy or smth, only local use if there a way to delete files from nextcloud folders via windows explorer? I connected the unraid nextcloud share in Windows but can only read, but not write/delete. already tried to set the share to public with no luck. any ideas what else can be done? thx in advance

Hi. No, it is not Sia. Storj V3 is an Own Project. Sia is Sia. if you need any assistance on config, just let me know and i will post my config here. My first config went down due to DB corruption. But after i updated to 6.8.0 it should be good now. i will try to setup my docker on coming weekend.

hello everyone. so V3 mainet will be going live anytime soon. couldnt find any proper description how to setup this V3 docker in Unraid. I have plenty of space available and would like to share it to storj to support the project. any1 else with same goal in here?

+1 same here. would be nice to have a step by step guide. even without a video.