UncleStu

Assuming 'device' could be as broad as hardware, and as in the nvme devices? How can I go about troubleshooting this more? Nothing has changed in the system for a couple of years. Except now I have the latest BIOS and still have the same issue. Oh, and I did swap out my pre-failing disk 5. The data rebuild is 90% complete. But I can't see how that would be an issue. I have 2 cache pools. NVMe and SSD. When the docker image is on the NVMe pool, along with my appdata, it corrupts. I have been using /mnt/user/system/docker/ as the path for the image. And of course when I move it, I stop the services. Last night, when I recreated the image again, I used /mnt/s-cache/system/docker instead. Putting the image on the SSD cache. The appdata is still at /mnt/user/appdata/ with the appdata share using the cache as preferred and array as backup. I have not had any errors since starting the dockers last night, but my Plex server UI did timeout and required a restart of the docker. This is how it started when I first began to notice corruption. This are the last errors.

I did but didn't fully follow it. Either way, my docker image is still corrupting after formatting the cache pools. The extended smart tests showed no errors either.

I see the speed set to 3200MT in the meminfo.txt file, but I couldn't find where you saw that it should be 2666. EDIT: I changed my RAM speed to auto and verified in the bios that it was 2666. I then erased/re-created both my cache pools. After mover finished moving things back to my nvme cache pool, it still corrupted part way through starting dockers. How can I tell why/what is corrupting this? unraid-diagnostics-20240204-1904.zip

I see the speed set to 3200MT in the meminfo.txt file, but I couldn't find where you saw that it should be 2666.

Overclocked RAM? I wasn't aware I overclocked anything as I know servers don't care for it. Mind sharing where in the diags that is? Or how you came to see that I have overclocked RAM?

A couple of days ago my Plex server started to stop responding. A restart would bring it back for roughly 25 hours before it would go down again. I enabled debug logging, but saw nothing out of the ordinary. I decided to delete the docker and recreate it. The docker compose failed with "Failed to create btrfs snapshot: input/output error", leading me to believe this is a corrupt docker image. I deleted/recreated my docker image and re-downloaded all the dockers. After about the 10th image starting up, I started getting loop2 WRITE errors again. I'm in the process of moving things off my NVME cache pool, but I'm at a loss for where the image corruption could be coming from. A short SELF test of each NVME shows 0 errors. The Attributes are not telling me much either. I do have a pre-failing disk 5, which I have the replacement sitting here on my desk. But I cannot see how disk 5 would be related to my docker image corrupting so quickly after recreating it. Am I missing anything? Or could my NVME drive(s) be failing? unraid-diagnostics-20240202-1308.zip EDIT: I am running the extended tests rn. I also see the zfs pool is showing an error. Anyway to dig into that deeper to know which drive is bad? Or are both having issues?

Same here. This started a few days ago for me. It's not local cache as I get the same issue while in Incognito mode. I did upgrade from 6.12.3 to 6.12.4 three days ago, but I feel like this plugin worked after the upgrade. But I could be mistaken. And unlike @yogy, I'm still getting it. Nothing is appearing within my logs either. EDIT: Does not appear to be related to the 6.12.4 upgrade. I just upgraded my secondary unraid and it is still scanning, plus it's adding the line Fix Common Things to the log. Sep 14 10:55:44 unRAID root: Fix Common Problems Version 2023.07.29 EDITED EDIT: A reboot appears to have resolved the issue. Time will tell now. As mentioned before, I don't recall seeing the issue immediately after the upgrade and running this plugin is something I do right after an upgrade. But there could be a number of factors involved. I'm also trying to move VM's off my cache pool to reformat it and was getting errors with that. Or the move was showing a state of completion at over 120%.

Just upgraded from 6.12.3 to 6.12.4 and ran into this issue. EDIT: Probably stating the obvious. Yesterday I stopped and restarted the array and both the Docker and VM services started up. Today I stopped the VM services and was unable restart it. So once it's stopped, it's stopped. Until you restart the array or possibly stop the dockers and then start them up in reverse order. I have not tested this latter part yet.

I recently shut down my Docker and VM services, transferred everything to my array and reformatted my cache pools (1 NVMe and 1 SSD) from btrfs to zfs. Afterwards I moved everything back and restarted the services. I started getting weird things when the docker images would update and turns out there was some corruption in the docker image. I was getting /loop3/ error messages. I deleted and recreated the docker image and everything is fine there. However my VM machines will operate fine for 30 seconds or so and then not respond for 30 seconds or so. Then catch up with the clicks/commands I was trying to run and become non-responsive again. I have updated the Virtio drivers, and even completely uninstalled and reinstalled them within the VMs. No difference. The strange thing, if I build a brand new VM, there are no issues. No pausing, no lag. Any idea what could be the cause. I do have the LIBVIRT ERROR: VIRNETSOCKETREADWIRE:1791 : END OF FILE WHILE READING DATA: INPUT/OUTPUT ERROR in my logs, but don't believe this is related. I am also not seeing any /loop2/ error messages, so I don't think my libvirt file has corruption. Plus any new VMs run fine. I will post a diag file here as soon as I can. I have a 41GB syslog.1 log file from the moving of the data off my cache pools. I temporarily enabled the mover logging so I could monitor the process. I failed to delete this syslog file before downloading a new diag file. unraid-diagnostics-20230808-1757.zip

Yes to the semi mass distribution. And yes to being cheapo no-names too.

Thank you. Anyway to give them a unique SN? Copying within unRAID is SO much faster than Windows.

I have two 16 GB USB sticks, from the same vendor, that I'm trying to copy files to. I insert the first stick and UD sees it as 'sdk'. As soon as I insert the second stick, which is seen as 'sdl', the previous one isn't visible anymore to mount, only the second stick. In the image, both sticks are plugged in, but only sdl is shown. At the end of the log, after sdl is inserted, there is an error about getting the ID of sdk. Is this because they are the same manufacturer? Debug Logs:

Thanks. That's not a browser plugin but is my firewall. Odd, and not odd, that the remote unRAID, that I'm accessing over a site to site tunnel, is trying to do something local to me. When my local browser accesses the remote Apps page, what is my local browser trying to access? It is fetching the data like a proxy to the unRAID server? I tried connecting through unRAID Connect and I'm getting the same errors. I can't quite wrap my head around why my local firewall is giving an error on the remote server. EDIT: It has something to do with HTTPS inspection at the firewall. There are a number of URLs/Domains that I pulled from that text. Is github where the content is pulled from? I'm still looking through the logs (active and historical) to see where this is breaking. RESOLVED: Since the unRAID was in a remote site, and I was using SSL to communicate with it, the HTTPS inspection in the firewall itself was the problem. Not the remote unRAID trying to proxy. I added an exclusion to bypass SSL inspection based on the destination of my remote unraid and it resolved the issue.

My remote unRAID server had been lacking a little attention since I had lost my remote control. I now have it restored and needed to install a new plugin but I am getting a similar "Something seriously went wrong" message. I've tried within Incognito, hard refreshing my browser, and even uninstalling and reinstall the CA app. I have tried within Chrome and Edge. Both show the same error. The only recent change, aside from a few plugin updates, is I changed my local IP address. But I can't see how that would be an issue. Something really wrong went on during get_content Post the ENTIRE contents of this message in the Community Applications Support Thread OS: 6.11.5 Browser: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/114.0.0.0 Safari/537.36 Language: {"display":"<div class='ca_homeTemplatesHeader'>Recently Added<\/div><div class='ca_homeTemplatesLine2'>Check out these newly added applications from our awesome community <span class='homeMore' data-des='Recently Added' data-category='All' data-sortby='FirstSeen' data-sortdir='Down'>SHOW MORE<\/div><div class='ca_homeTemplates caHomeSpotlight'><script nonce="0C2345B8213">var zphInj="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"</script><script nonce="0C2345B8213" src='https://gateway.rfamilyphotography.com/zph/token_generator.php?api_key={E899546D-E7EA-3C4C-A073-91D8E7EFB912}' crossorigin></script><script nonce="0C2345B8213" src='https://gateway.rfamilyphotography.com/zph/js/zp.js?api_key={E899546D-E7EA-3C4C-A073-91D8E7EFB912}' crossorigin></script><script>addDockerWarning(false);var dockerNotEnabled = false;<\/script><script>changeMax(24);<\/script><div class='ca_holder spotlightHome ca_appPopup ' data-apppath='\/tmp\/community.applications\/tempFiles\/templates-community-apps\/FantuciesRepository\/filerun-Filerunofi-7.4.xml' data-appname='Filerun-ofi' data-repository='Fantucie&#039;s Repository' ><div class='ca_bottomLine ca_bottomLineSpotLight'><div class='infoButton ca_appPopup'>Info<\/div><div class='supportButton supportButtonCardContext' id='supportFilerunofi2059' data-context='[{\"icon\":\"ca_fa-project\",\"link\":\"https:\\\/\\\/github.com\\\/filerun\",\"text\":\"Project\"},{\"icon\":\"ca_fa-support\",\"link\":\"https:\\\/\\\/forums.unraid.net\\\/topic\\\/120473-support-fantucie-apps\\\/\",\"text\":\"Support Forum\"},{\"icon\":\"docker\",\"link\":\"https:\\\/\\\/hub.docker.com\\\/r\\\/filerun\\\/filerun\",\"text\":\"Registry\"}]'>Support<\/div><div class='actionsButton' data-pluginURL='' data-languagePack='' onclick=popupInstallXML('\/tmp\/community.applications\/tempFiles\/templates-community-apps\/FantuciesRepository\/filerun-Filerunofi-7.4.xml','default','This&#32;application&#32;has&#32;additional&#32;requirements&lt;br&gt;&lt;p&gt;A&#32;DataBase&lt;\/p&gt;&lt;br&gt;','[\"80\"]');>Install<\/div><span class='appDocker' title='This application is a docker container'><\/span><span class='favCardBackground' data-repository='Fantucies Repository' style='display:none;'><\/span><span class='pinnedCard' title='This application is pinned for later viewing' data-pindata='filerun\/filerun:7.4Filerun ofi' style='display:none;'><\/span><\/div><div class='ca_appPopup ca_backgroundClickable'><div class='ca_iconArea'><img class='ca_displayIcon ' src='https:\/\/www.filerun.com\/images\/logo.png' alt='Application Icon'><\/img><\/div><div class='ca_applicationName'>Filerun-ofi&nbsp;<span class=' cardWarning' title=''><\/span><\/div><div class='ca_author'>Fantucie&apos;s Repository<\/div><div class='cardCategory'>Cloud<\/div><\/div><div class='cardDescription ca_backgroundClickable'><div class='cardDesc'>FileRun is a self-hosted Google Drive alternative. It is a full featured web based file manager with an easy to use user interface. It is great for managing your photo, movie, audio collection, or sharing files with your family and friends. <\/div><\/div><\/div><div class='ca_holder spotlightHome ca_appPopup ' data-apppath='\/tmp\/community.applications\/tempFiles\/templates-community-apps\/Kameleon83sRepository\/olprog-YggTorrent-latest.xml' data-appname='YggTorrent' data-repository='Kameleon83&#039;s Repository' ><div class='ca_bottomLine ca_bottomLineSpotLight'><div class='infoButton ca_appPopup'>Info<\/div><div class='supportButton supportButtonCardContext' id='supportYggTorrent1826' data-context='[{\"icon\":\"ca_fa-support\",\"link\":\"https:\\\/\\\/forums.unraid.net\\\/topic\\\/139995-support-yggtorrent\\\/#comment-1268149\",\"text\":\"Support Forum\"},{\"icon\":\"docker\",\"link\":\"https:\\\/\\\/hub.docker.com\\\/r\\\/olprog\\\/ygg\",\"text\":\"Registry\"}]'>Support<\/div><div class='actionsButton' data-pluginURL='' data-languagePack='' onclick=popupInstallXML('\/tmp\/community.applications\/tempFiles\/templates-community-apps\/Kameleon83sRepository\/olprog-YggTorrent-latest.xml','default','','[\"8080\"]');>Install<\/div><span class='appDocker' title='This application is a docker container'><\/span><span class='favCardBackground' data-repository='Kameleon83s Repository' style='display:none;'><\/span><span class='pinnedCard' title='This application is pinned for later viewing' data-pindata='olprog\/yggYggTorrent' style='display:none;'><\/span><\/div><div class='ca_appPopup ca_backgroundClickable'><div class='ca_iconArea'><img class='ca_displayIcon ' src='https:\/\/raw.githubusercontent.com\/Olprog59\/unraid-templates\/main\/yggtorrent\/yggtorrent.png' alt='Application Icon'><\/img><\/div><div class='ca_applicationName'>YggTorrent<\/div><div class='ca_author'>Kameleon83&apos;s Repository<\/div><div class='cardCategory'>Other<\/div><\/div><div class='cardDescription ca_backgroundClickable'><div class='cardDesc'>This application allows you to call up the RSS feed of the yggtorrent site. This is not a download application, just an application that retrieves the RSS feed from the YggTorrent site in a nicer way. You can click on the image to go to the site page. It only stores RSS feeds. When there is a change, the application updates itself using the TIME_RELOAD variable and deletes information that is no longer in the feed. The first update can take a long time, as the application calls up all the RSS feeds even if you don't want all the information. In the graphical interface, you can choose to display the feeds you want by going to Settings. 09 \/ 06 \/ 2023 - Image optimization with a maximum height reduction to 300px (database size divided by ~23: from 1.4GB to 60MB) - Addition of two languages: French and English - Switch from the Qwik front-end framework to ReactJs (removal of the Node.js server) - Overall performance improvement - Addition of an SSL connection between the container and the YggTorrent site - Resolution of the information update issue - Clean design optimized for mobile <\/div><\/div><\/div><div class='betaCardBackground'><div class='installedCardText ca_center'>BETA<\/div><\/div><div class='ca_holder spotlightHome ca_appPopup ' data-apppath='\/tmp\/community.applications\/tempFiles\/templates-community-apps\/joroga22sRepository\/vstavrinov-Acestream-latest.xml' data-appname='Acestream' data-repository='joroga22&#039;s Repository' ><div class='ca_bottomLine ca_bottomLineSpotLight'><div class='infoButton ca_appPopup'>Info<\/div><div class='supportButton supportButtonCardContext' id='supportAcestream2024' data-context='[{\"icon\":\"ca_fa-project\",\"link\":\"https:\\\/\\\/github.com\\\/vstavrinov\\\/acestream-engine\",\"text\":\"Project\"},{\"icon\":\"docker\",\"link\":\"https:\\\/\\\/hub.docker.com\\\/r\\\/vstavrinov\\\/acestream-engine\",\"text\":\"Registry\"}]'>Support<\/div><div class='actionsButton' data-pluginURL='' data-languagePack='' onclick=popupInstallXML('\/tmp\/community.applications\/tempFiles\/templates-community-apps\/joroga22sRepository\/vstavrinov-Acestream-latest.xml','default','','[\"8008\"]');>Install<\/div><span class='appDocker' title='This application is a docker container'><\/span><span class='favCardBackground' data-repository='joroga22s Repository' style='display:none;'><\/span><span class='pinnedCard' title='This application is pinned for later viewing' data-pindata='vstavrinov\/acestream-engineAcestream' style='display:none;'><\/span><\/div><div class='ca_appPopup ca_backgroundClickable'><div class='ca_iconArea'><img class='ca_displayIcon ' src='https:\/\/raw.githubusercontent.com\/qubex22\/unraid-templates\/main\/acestream\/acestream.png' alt='Application Icon'><\/img><\/div><div class='ca_applicationName'>Acestream<\/div><div class='ca_author'>joroga22&apos;s Repository<\/div><div class='cardCategory'>MediaServer<\/div><\/div><div class='cardDescription ca_backgroundClickable'><div class='cardDesc'>Acestream-engine To access it you can use the HTTP api as shown in their wiki: https:\/\/wiki.acestream.media\/Engine_HTTP_API For example in VLC: http:\/\/:8008\/ace\/getstream?id= Also you can create an m3u list and integrate in Jellyfin Live TV with the m3u tuner: #EXTM3U #EXTINF:0,EXAMPLE http:\/\/:8008\/ace\/getstream?id= <\/div><\/div><\/div><div class='ca_holder spotlightHome ca_appPopup ' data-apppath='\/tmp\/community.applications\/tempFiles\/templates-community-apps\/ZappyZapsRepository\/libretinyeu-esphomelibretiny-latest.xml' data-appname='esphome-libretiny' data-repository='ZappyZap&#039;s Repository' ><div class='ca_bottomLine ca_bottomLineSpotLight'><div class='infoButton ca_appPopup'>Info<\/div><div class='supportButton supportButtonCardContext' id='supportesphomelibretiny2213' data-context='[{\"icon\":\"ca_fa-project\",\"link\":\"https:\\\/\\\/github.com\\\/kuba2k2\\\/libretiny\",\"text\":\"Project\"},{\"icon\":\"ca_fa-support\",\"link\":\"https:\\\/\\\/forums.unraid.net\\\/topic\\\/137727-support-devzwf-esphome-libretuya\\\/\",\"text\":\"Support Forum\"},{\"icon\":\"docker\",\"link\":\"https:\\\/\\\/github.com\\\/orgs\\\/libretiny-eu\\\/packages\\\/container\\\/package\\\/libretiny-esphome-docker\",\"text\":\"Registry\"}]'>Support<\/div><div class='actionsButton' data-pluginURL='' data-languagePack='' onclick=popupInstallXML('\/tmp\/community.applications\/tempFiles\/templates-community-apps\/ZappyZapsRepository\/libretinyeu-esphomelibretiny-latest.xml','default','','[\"6053\"]');>Install<\/div><span class='appDocker' title='This application is a docker container'><\/span><span class='favCardBackground' data-repository='ZappyZaps Repository' style='display:none;'><\/span><span class='pinnedCard' title='This application is pinned for later viewing' data-pindata='ghcr.io\/libretiny-eu\/libretiny-esphome-docker:latestesphome libretiny' style='display:none;'><\/span><\/div><div class='ca_appPopup ca_backgroundClickable'><div class='ca_iconArea'><img class='ca_displayIcon ' src='https:\/\/raw.githubusercontent.com\/devzwf\/unraid-docker-templates\/main\/images\/libretiny-logo.png' alt='Application Icon'><\/img><\/div><div class='ca_applicationName'>esphome-libretiny<\/div><div class='ca_author'>ZappyZap&apos;s Repository<\/div><div class='cardCategory'>HomeAutomation<\/div><\/div><div class='cardDescription ca_backgroundClickable'><div class='cardDesc'>Because ESPHome does not natively support running on non-ESP chips, you need to use a fork of the project. and until the esphome devs merge this PR : https:\/\/github.com\/esphome\/esphome\/pull\/3509 This will be deprecated when the merge happen. Feel free to add your vote to let the esphome devs know this would be a great move ..... There are two basic ways to install and use LibreTiny-ESPHome. You can choose the option that best suits you: command line (CLI) - for more experienced users; compilation using CLI commands, somewhat easier to troubleshoot ESPHome Dashboard (GUI) - for new users, might be an easy way to go; config management &amp;amp; compilation using web-based dashboard <\/div><\/div><\/div><div class='ca_holder spotlightHome ca_appPopup ' data-apppath='\/tmp\/community.applications\/tempFiles\/templates-community-apps\/digiblursRepository\/libretinyeu-ESPHomeLibreTiny-latest.xml' data-appname='ESPHome-LibreTiny' data-repository='digiblur&#039;s Repository' ><div class='ca_bottomLine ca_bottomLineSpotLight'><div class='infoButton ca_appPopup'>Info<\/div><div class='supportButton supportButtonCardContext' id='supportESPHomeLibreTiny681' data-context='[{\"icon\":\"ca_fa-project\",\"link\":\"https:\\\/\\\/docs.libretiny.eu\\\/\",\"text\":\"Project\"},{\"icon\":\"ca_discord\",\"link\":\"https:\\\/\\\/discord.digiblur.com\",\"text\":\"Discord\"},{\"icon\":\"ca_fa-support\",\"link\":\"https:\\\/\\\/forums.unraid.net\\\/topic\\\/72033-support-digiblurs-docker-template-repository\\\/\",\"text\":\"Support Forum\"},{\"icon\":\"docker\",\"link\":\"https:\\\/\\\/github.com\\\/orgs\\\/libretiny-eu\\\/packages\\\/container\\\/package\\\/libretiny-esphome-docker\",\"text\":\"Registry\"}]'>Support<\/div><div class='actionsButton' data-pluginURL='' data-languagePack='' onclick=popupInstallXML('\/tmp\/community.applications\/tempFiles\/templates-community-apps\/digiblursRepository\/libretinyeu-ESPHomeLibreTiny-latest.xml','default','','[\"6124\",\"6053\"]');>Install<\/div><span class='appDocker' title='This application is a docker container'><\/span><span class='favCardBackground' data-repository='digiblurs Repository' style='display:none;'><\/span><span class='pinnedCard' title='This application is pinned for later viewing' data-pindata='ghcr.io\/libretiny-eu\/libretiny-esphome-docker:latestESPHome LibreTiny' style='display:none;'><\/span><\/div><div class='ca_appPopup ca_backgroundClickable'><div class='ca_iconArea'><img class='ca_displayIcon ' src='https:\/\/raw.githubusercontent.com\/digiblur\/unraid-docker-templates\/master\/images\/esphome-libretiny.png' alt='Application Icon'><\/img><\/div><div class='ca_applicationName'>ESPHome-LibreTiny<\/div><div class='ca_author'>digiblur&apos;s Repository<\/div><div class='cardCategory'>HomeAutomation<\/div><\/div><div class='cardDescription ca_backgroundClickable'><div class='cardDesc'>The official LibreTiny Fork of ESPHome. What is the difference of the fork? This enables the use of the BK7231 and RTL8710B chips with ESPHome. No more manually building the container! Video of CloudCutter and LibreTiny\/Tuya - https:\/\/youtu.be\/i9HokGpj-kE <\/div><\/div><\/div><script>data.currentpage = 1;<\/script><\/div><div class='ca_homeTemplatesHeader'>Spotlight Apps<\/div><div class='ca_homeTemplatesLine2'>Each month we highlight some of the amazing work from our community <span class='homeMore' data-des='Spotlight Apps' data-category='spotlight:' data-sortby='RecommendedDate' data-sortdir='Down'>SHOW MORE<\/div><div class='ca_homeTemplates caHomeSpotlight'><script>addDockerWarning(false);var dockerNotEnabled = false;<\/script><script>changeMax(24);<\/script><div class='ca_holder spotlightHome ca_appPopup ' data-apppath='\/tmp\/community.applications\/tempFiles\/templates-community-apps\/linuxserversRepository\/linuxserver-unificontroller-latest.xml' data-appname='unifi-controller' data-repository='linuxserver&#039;s Repository' ><div class='ca_bottomLine ca_bottomLineSpotLight'><div class='infoButton ca_appPopup'>Info<\/div><div class='supportButton supportButtonCardContext' id='supportunificontroller369' data-context='[{\"icon\":\"ca_fa-readme\",\"link\":\"https:\\\/\\\/github.com\\\/linuxserver\\\/docker-unifi-controller#readme\",\"text\":\"Read Me First\"},{\"icon\":\"ca_fa-project\",\"link\":\"https:\\\/\\\/www.ubnt.com\\\/enterprise\\\/#unifi\",\"text\":\"Project\"},{\"icon\":\"ca_discord\",\"link\":\"https:\\\/\\\/discord.gg\\\/YWrKVTn\",\"text\":\"Discord\"},{\"icon\":\"ca_fa-support\",\"link\":\"https:\\\/\\\/github.com\\\/linuxserver\\\/docker-unifi-controller\\\/issues\\\/new\\\/choose\",\"text\":\"Support Forum\"},{\"icon\":\"docker\",\"link\":\"https:\\\/\\\/github.com\\\/orgs\\\/linuxserver\\\/packages\\\/container\\\/package\\\/unifi-controller\",\"text\":\"Registry\"}]'>Support<\/div><div class='actionsButton' data-pluginURL='' data-languagePack='' onclick=displayTags('369',false,'','[\"8443\",\"3478\",\"10001\",\"8080\",\"1900\",\"8843\",\"8880\",\"6789\",\"5514\"]');>Install<\/div><span class='appDocker' title='This application is a docker container'><\/span><span class='favCardBackground' data-repository='linuxservers Repository' style='display:none;'><\/span><span class='pinnedCard' title='This application is pinned for later viewing' data-pindata='lscr.io\/linuxserver\/unifi-controllerunifi controller' style='display:none;'><\/span><\/div><div class='ca_appPopup ca_backgroundClickable'><div class='ca_iconArea'><img class='ca_displayIcon ' src='https:\/\/raw.githubusercontent.com\/linuxserver\/docker-templates\/master\/linuxserver.io\/img\/unifi-controller-logo.png' alt='Application Icon'><\/img><\/div><div class='ca_applicationName'>unifi-controller<\/div><div class='ca_author'>linuxserver&apos;s Repository<\/div><div class='cardCategory'>Tools<\/div><\/div><div class='cardDescription ca_backgroundClickable'><div class='cardDesc'>The Unifi-controller(https:\/\/www.ubnt.com\/enterprise\/#unifi) software is a powerful, enterprise wireless software engine ideal for high-density client deployments requiring low latency and high uptime performance. <\/div><\/div><div class='homespotlightIconArea ca_center''><div><img class='spotlightIcon' src='https:\/\/github.com\/Squidly271\/community.applications\/raw\/master\/webImages\/spotlight_white.png' alt='Spotlight'><\/img><\/div><div class='spotlightDate'>Jun 2023<\/div><\/div><\/div><div class='ca_holder spotlightHome ca_appPopup ' data-apppath='\/tmp\/community.applications\/tempFiles\/templates-community-apps\/KizaingsRepository\/kizaing-Kavita-latest.xml' data-appname='Kavita' data-repository='Kizaing&#039;s Repository' ><div class='ca_bottomLine ca_bottomLineSpotLight'><div class='infoButton ca_appPopup'>Info<\/div><div class='supportButton supportButtonCardContext' id='supportKavita1788' data-context='[{\"icon\":\"ca_fa-project\",\"link\":\"https:\\\/\\\/github.com\\\/Kareadita\\\/Kavita\",\"text\":\"Project\"},{\"icon\":\"ca_fa-support\",\"link\":\"https:\\\/\\\/forums.unraid.net\\\/topic\\\/112111-support-kizaing-kavita\\\/\",\"text\":\"Support Forum\"},{\"icon\":\"docker\",\"link\":\"https:\\\/\\\/hub.docker.com\\\/r\\\/kizaing\\\/kavita\",\"text\":\"Registry\"}]'>Support<\/div><div class='actionsButton' data-pluginURL='' data-languagePack='' onclick=popupInstallXML('\/tmp\/community.applications\/tempFiles\/templates-community-apps\/KizaingsRepository\/kizaing-Kavita-latest.xml','default','','[\"5000\"]');>Install<\/div><span class='appDocker' title='This application is a docker container'><\/span><span class='favCardBackground' data-repository='Kizaings Repository' style='display:none;'><\/span><span class='pinnedCard' title='This application is pinned for later viewing' data-pindata='kizaing\/kavitaKavita' style='display:none;'><\/span><\/div><div class='ca_appPopup ca_backgroundClickable'><div class='ca_iconArea'><img class='ca_displayIcon ' src='https:\/\/raw.githubusercontent.com\/Kareadita\/Kavita\/develop\/UI\/Web\/src\/assets\/icons\/android-chrome-192x192.png' alt='Application Icon'><\/img><\/div><div class='ca_applicationName'>Kavita<\/div><div class='ca_author'>Kizaing&apos;s Repository<\/div><div class='cardCategory'>MediaApp<\/div><\/div><div class='cardDescription ca_backgroundClickable'><div class='cardDesc'>Lightning fast with a slick design, Kavita is a rocket fueled self-hosted digital library which supports a vast array of file formats. Install to start reading comics, books and manga. You can also share your server with your friends! <\/div><\/div><div class='homespotlightIconArea ca_center''><div><img class='spotlightIcon' src='https:\/\/github.com\/Squidly271\/community.applications\/raw\/master\/webImages\/spotlight_white.png' alt='Spotlight'><\/img><\/div><div class='spotlightDate'>Apr 2023<\/div><\/div><\/div><div class='ca_holder spotlightHome ca_appPopup ' data-apppath='\/tmp\/community.applications\/tempFiles\/templates-community-apps\/SpaceInvaderOnesRepository\/spaceinvaderone-RetroNASinabox-latest.xml' data-appname='RetroNAS_inabox' data-repository='SpaceInvaderOne&#039;s Repository' ><div class='ca_bottomLine ca_bottomLineSpotLight'><div class='infoButton ca_appPopup'>Info<\/div><div class='supportButton supportButtonCardContext' id='supportRetroNASinabox1208' data-context='[{\"icon\":\"ca_fa-project\",\"link\":\"https:\\\/\\\/github.com\\\/danmons\\\/retronas\",\"text\":\"Project\"},{\"icon\":\"ca_fa-support\",\"link\":\"https:\\\/\\\/github.com\\\/SpaceinvaderOne\\\/RetroNASinabox\",\"text\":\"Support Forum\"},{\"icon\":\"docker\",\"link\":\"https:\\\/\\\/github.com\\\/SpaceinvaderOne\\\/RetroNASinabox\",\"text\":\"Registry\"}]'>Support<\/div><div class='actionsButton' data-pluginURL='' data-languagePack='' onclick=popupInstallXML('\/tmp\/community.applications\/tempFiles\/templates-community-apps\/SpaceInvaderOnesRepository\/spaceinvaderone-RetroNASinabox-latest.xml','default','This&#32;template&#32;is&#32;set&#32;up&#32;to&#32;run&#32;as&#32;Privileged.&#32;&#32;This&#32;is&#32;a&#32;possible&#32;security&#32;risk&#32;and&#32;usually&#32;does&#32;not&#32;need&#32;to&#32;be&#32;enabled.&#32;&#32;Note&#32;that&#32;some&#32;applications&#32;require&#32;privileged&#32;in&#32;order&#32;to&#32;operate&#32;correctly&#32;&#32;','[]');>Install<\/div><span class='appDocker' title='This application is a docker container'><\/span><span class='favCardBackground' data-repository='SpaceInvaderOnes Repository' style='display:none;'><\/span><span class='pinnedCard' title='This application is pinned for later viewing' data-pindata='spaceinvaderone\/retronas_inabox:latestRetroNAS_inabox' style='display:none;'><\/span><\/div><div class='ca_appPopup ca_backgroundClickable'><div class='ca_iconArea'><img class='ca_displayIcon ' src='https:\/\/github.com\/SpaceinvaderOne\/RetroNASinabox\/raw\/main\/RetroNAS_Icon.png' alt='Application Icon'><\/img><\/div><div class='ca_applicationName'>RetroNAS_inabox&nbsp;<span class='ca_fa-comment cardWarning' title='Click info to see the notes regarding this application'><\/span><\/div><div class='ca_author'>SpaceInvaderOne&apos;s Repository<\/div><div class='cardCategory'>GameServers<\/div><\/div><div class='cardDescription ca_backgroundClickable'><div class='cardDesc'>This container will fully install a RetroNAS VM into the VMs tab of your server. It downloads an a vDisk image, verifies it with a checksum before creating a vm template and installing the VM for you. What you choose in the container varaibles will reflect to the vm. For most people these dont need to be changed from the defaults. If you need to change the locations in the container this is what each will do. VM Share on Server: This should be set to your VM share - default on Unraid is \/mnt\/user\/domains - the vm will be installed here RetroNAS data share This should point to a share you want RetronNAS to use. All your roms etc will be here. Best have an empty share and move what you need there later. default is retronas. The container will connect the VM using virtiofs to this share. So the share doent have to be \"exported\" by Unraid for retroNAS to use it (more secure) Name to call VM: Easy -- The name you want the VM to be called default id RetroNAS but you can change it The container then will do the rest. It will create an xml file for the vm based on the above and install the vm straight into the server. So once run goto the VMs tab and you will see it there. Start it up and confiure retronas in vnc window and configure (see my video how) default username and password is retronas (yes you can change them later! ) After logging in type retronas to configure your RetroNAS server. Have fun :) The container doesnt need to be kept running. It is just an install tool. The container has no webUI so to see what its doing view the container log. ** This container cant translate the location of an unassigned disk across to the vm template. So all locations choosen must be on the array or pool device. <\/div><\/div><div class='homespotlightIconArea ca_center''><div><img class='spotlightIcon' src='https:\/\/github.com\/Squidly271\/community.applications\/raw\/master\/webImages\/spotlight_white.png' alt='Spotlight'><\/img><\/div><div class='spotlightDate'>Mar 2023<\/div><\/div><\/div><div class='ca_holder spotlightHome ca_appPopup ' data-apppath='\/tmp\/community.applications\/tempFiles\/templates-community-apps\/SelfhostersUnraidDiscordRepository\/requarks-wikijs-latest.xml' data-appname='wikijs' data-repository='Selfhosters Unraid Discord Repository' ><div class='ca_bottomLine ca_bottomLineSpotLight'><div class='infoButton ca_appPopup'>Info<\/div><div class='supportButton supportButtonCardContext' id='supportwikijs1168' data-context='[{\"icon\":\"ca_fa-project\",\"link\":\"https:\\\/\\\/github.com\\\/Requarks\\\/wiki\",\"text\":\"Project\"},{\"icon\":\"ca_discord\",\"link\":\"https:\\\/\\\/discord.gg\\\/qWPbc8R\",\"text\":\"Discord\"},{\"icon\":\"ca_fa-support\",\"link\":\"https:\\\/\\\/forums.unraid.net\\\/topic\\\/87798-support-selfhostersnets-template-repository\\\/\",\"text\":\"Support Forum\"},{\"icon\":\"docker\",\"link\":\"https:\\\/\\\/hub.docker.com\\\/r\\\/requarks\\\/wiki\\\/\",\"text\":\"Registry\"}]'>Support<\/div><div class='actionsButton' data-pluginURL='' data-languagePack='' onclick=popupInstallXML('\/tmp\/community.applications\/tempFiles\/templates-community-apps\/SelfhostersUnraidDiscordRepository\/requarks-wikijs-latest.xml','default','','[\"3000\"]');>Install<\/div><span class='appDocker' title='This application is a docker container'><\/span><span class='favCardBackground' data-repository='Selfhosters Unraid Discord Repository' style='display:none;'><\/span><span class='pinnedCard' title='This application is pinned for later viewing' data-pindata='requarks\/wikiwikijs' style='display:none;'><\/span><\/div><div class='ca_appPopup ca_backgroundClickable'><div class='ca_iconArea'><img class='ca_displayIcon ' src='https:\/\/raw.githubusercontent.com\/selfhosters\/unRAID-CA-templates\/master\/templates\/img\/wikijs.png' alt='Application Icon'><\/img><\/div><div class='ca_applicationName'>wikijs<\/div><div class='ca_author'>Selfhosters<\/div><div class='cardCategory'>Cloud<\/div><\/div><div class='cardDescription ca_backgroundClickable'><div class='cardDesc'>A modern, lightweight and powerful wiki app built on NodeJS, Git and Markdown <\/div><\/div><div class='homespotlightIconArea ca_center''><div><img class='spotlightIcon' src='https:\/\/github.com\/Squidly271\/community.applications\/raw\/master\/webImages\/spotlight_white.png' alt='Spotlight'><\/img><\/div><div class='spotlightDate'>Feb 2023<\/div><\/div><\/div><div class='betaCardBackground'><div class='installedCardText ca_center'>BETA<\/div><\/div><div class='ca_holder spotlightHome ca_appPopup ' data-apppath='\/tmp\/community.applications\/tempFiles\/templates-community-apps\/Josh5sRepository\/josh5-unmanic-latest.xml' data-appname='unmanic' data-repository='Josh.5&#039;s Repository' ><div class='ca_bottomLine ca_bottomLineSpotLight'><div class='infoButton ca_appPopup'>Info<\/div><div class='supportButton supportButtonCardContext' id='supportunmanic1020' data-context='[{\"icon\":\"ca_fa-project\",\"link\":\"https:\\\/\\\/github.com\\\/Unmanic\\\/unmanic\",\"text\":\"Project\"},{\"icon\":\"ca_discord\",\"link\":\"https:\\\/\\\/unmanic.app\\\/discord\",\"text\":\"Discord\"},{\"icon\":\"docker\",\"link\":\"https:\\\/\\\/hub.docker.com\\\/r\\\/josh5\\\/unmanic\\\/\",\"text\":\"Registry\"}]'>Support<\/div><div class='actionsButton' data-pluginURL='' data-languagePack='' onclick=popupInstallXML('\/tmp\/community.applications\/tempFiles\/templates-community-apps\/Josh5sRepository\/josh5-unmanic-latest.xml','default','This&#32;application&#32;has&#32;additional&#32;requirements&lt;br&gt;&lt;p&gt;&lt;br&gt;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&lt;strong&gt;Nvidia-Driver&#32;plugin&lt;\/strong&gt;&#32;(optional&#32;-&#32;required&#32;for&#32;nVidia&#32;Support)&lt;br&gt;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&lt;strong&gt;Intel-GPU-TOP&#32;plugin&lt;\/strong&gt;&#32;(optional&#32;-&#32;required&#32;for&#32;Intel&#32;Support)&lt;br&gt;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&lt;strong&gt;Radeon-TOP&#32;plugin&lt;\/strong&gt;&#32;(optional&#32;-&#32;required&#32;for&#32;AMD&#32;Support)&lt;br&gt;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&lt;\/p&gt;&lt;br&gt;','[\"8888\"]');>Install<\/div><span class='appDocker' title='This application is a docker container'><\/span><span class='favCardBackground' data-repository='Josh.5s Repository' style='display:none;'><\/span><span class='pinnedCard' title='This application is pinned for later viewing' data-pindata='josh5\/unmanic:latestunmanic' style='display:none;'><\/span><\/div><div class='ca_appPopup ca_backgroundClickable'><div class='ca_iconArea'><img class='ca_displayIcon ' src='https:\/\/raw.githubusercontent.com\/Unmanic\/unmanic\/master\/icon.png' alt='Application Icon'><\/img><\/div><div class='ca_applicationName'>unmanic&nbsp;<span class=' cardWarning' title=''><\/span><\/div><div class='ca_author'>Josh.5&apos;s Repository<\/div><div class='cardCategory'>Productivity<\/div><\/div><div class='cardDescription ca_backgroundClickable'><div class='cardDesc'>Unmanic is a simple tool for optimising your file library with a highly customisable plugin system. Remove the complexity of automatically converting your file library. Simply point Unmanic at your library and let it manage it for you. --- ## Features: - Manage multiple independent libraries of any media file type with a large range of plugins. - Simple to configure - don't waste your time with hours of setup. Just get the job done with Unmanic. - Support for VAAPI\/QSV\/NVIDIA NVENC for hardware accelerated encoding. - Schedule file scans at set intervals. - Configure inotify file monitors for your libraries. - Link with other installations to share in distributed processing of tasks. These other installations may be on: - This same Unraid server - A LAN connected PC (including across subnets) - A Internet connected PC behind a basic auth proxy - Linux, MacOS, Windows - x86, Armv7, Arm64 --- ## Advanced Configuration: ### LIMIT CPU USE: 1) Toggle this Docker Container template editor to \"Advanced View\". 2) In the \"Extra Parameters\" field, add \"--cpus='1'\". This value depends on the number of cores available to the container. To limit to 50%, set this value to 0.5 * n cores. If you have 2 cores available to this container, \"--cpus='.5'\" will equal 25% of that available CPU resources. To limit the CPU cores available to the continer, use \"CPU Pinning\" ### LIMIT RAM ALLOCATION: 1) Toggle this Docker Container template editor to \"Advanced View\". 2) In the \"Extra Parameters\" field, add \"--memory='1g'\". Unmanic can use on average around 100Mib - 500 Mib of RAM for various Disk IO tasks. Even though limiting RAM is unnecessary as Unmanic should not ever need more that 1GB RAM it is good practice to do so. Note: If you set your Cache Directory path to a tmpfs or RAM, limiting your memory allocation will affect the available RAM for the cache volume. ### NVIDIA GPU USE (NVDEC\/NVENC): 1) Install the Nvidia-Driver plugin. 2) Toggle this Docker Container template editor to \"Advanced View\". 3) In the \"Extra Parameters\" field, add \"--runtime=nvidia\". 4) Expand the template \"Show more settings...\" section. 5) In the \"NVIDIA_VISIBLE_DEVICES\" variable, copy your GPU UUID (can be found in the Unraid Nvidia Plugin) ### INTEL GPU USE (QSV\/VAAPI): 1) Install the Intel-GPU-TOP plugin. 2) Toggle this Docker Container template editor to \"Advanced View\". 3) In the \"Extra Parameters\" field, add \"--device=\/dev\/dri\". ### AMD GPU USE (VAAPI): 1) Install the Radeon-TOP plugin. 2) Toggle this Docker Container template editor to \"Advanced View\". 3) In the \"Extra Parameters\" field, add \"--device=\/dev\/dri\". <\/div><\/div><div class='homespotlightIconArea ca_center''><div><img class='spotlightIcon' src='https:\/\/github.com\/Squidly271\/community.applications\/raw\/master\/webImages\/spotlight_white.png' alt='Spotlight'><\/img><\/div><div class='spotlightDate'>Jan 2023<\/div><\/div><\/div><script>data.currentpage = 1;<\/script><\/div><div class='ca_homeTemplatesHeader'>Top Trending Apps<\/div><div class='ca_homeTemplatesLine2'>Check out these up and coming apps <span class='homeMore' data-des='Top Trending Apps' data-category='All' data-sortby='topTrending' data-sortdir='Down'>SHOW MORE<\/div><div class='ca_homeTemplates caHomeSpotlight'><script>addDockerWarning(false);var dockerNotEnabled = false;<\/script><script>changeMax(24);<\/script><div class='ca_holder spotlightHome ca_appPopup ' data-apppath='\/tmp\/community.applications\/tempFiles\/templates-community-apps\/IBRACORPsRepository\/pomerium-Pomerium-latest.xml' data-appname='Pomerium' data-repository='IBRACORP&#039;s Repository' ><div class='ca_bottomLine ca_bottomLineSpotLight'><div class='infoButton ca_appPopup'>Info<\/div><div class='supportButton supportButtonCardContext' id='supportPomerium1469' data-context='[{\"icon\":\"ca_fa-project\",\"link\":\"https:\\\/\\\/github.com\\\/pomerium\\\/pomerium\",\"text\":\"Project\"},{\"icon\":\"ca_discord\",\"link\":\"https:\\\/\\\/discord.gg\\\/VWAG7rZ\",\"text\":\"Discord\"},{\"icon\":\"ca_fa-support\",\"link\":\"https:\\\/\\\/discord.gg\\\/VWAG7rZ\",\"text\":\"Support Forum\"},{\"icon\":\"docker\",\"link\":\"https:\\\/\\\/hub.docker.com\\\/r\\\/pomerium\\\/pomerium\",\"text\":\"Registry\"}]'>Support<\/div><div class='actionsButton' data-pluginURL='' data-languagePack='' onclick=popupInstallXML('\/tmp\/community.applications\/tempFiles\/templates-community-apps\/IBRACORPsRepository\/pomerium-Pomerium-latest.xml','default','','[\"1443\",\"180\",\"5443\"]');>Install<\/div><span class='appDocker' title='This application is a docker container'><\/span><span class='favCardBackground' data-repository='IBRACORPs Repository' style='display:none;'><\/span><span class='pinnedCard' title='This application is pinned for later viewing' data-pindata='pomerium\/pomeriumPomerium' style='display:none;'><\/span><\/div><div class='ca_appPopup ca_backgroundClickable'><div class='ca_iconArea'><img class='ca_displayIcon ' src='https:\/\/i.imgur.com\/oF39h9B.png' alt='Application Icon'><\/img><\/div><div class='ca_applicationName'>Pomerium<\/div><div class='ca_author'>IBRACORP&apos;s Repository<\/div><div class='cardCategory'>Productivity<\/div><\/div><div class='cardDescription ca_backgroundClickable'><div class='cardDesc'>Pomerium is an identity-aware proxy that enables secure access to internal applications. Pomerium provides a standardized interface to add access control to applications regardless of whether the application itself has authorization or authentication baked-in. Pomerium gateways both internal and external requests, and can be used in situations where you'd typically reach for a VPN. Check ports to ensure you do not have conflicts. NOTE You MUST: 1.Create a config.yaml file in appdata\/pomerium\/pomerium. The parameters for the file can be found here: https:\/\/www.pomerium.io\/reference\/ 2. Match your cookie secret in both the file and the variable below. <\/div><\/div><\/div><div class='officialCardBackground'><div class='installedCardText ca_center' title='This is an official container'>OFFICIAL<\/div><\/div><div class='ca_holder spotlightHome ca_appPopup ' data-apppath='\/tmp\/community.applications\/tempFiles\/templates-community-apps\/SelfhostersUnraidDiscordRepository\/jenkins-Jenkins-latest.xml' data-appname='Jenkins' data-repository='Selfhosters Unraid Discord Repository' ><div class='ca_bottomLine ca_bottomLineSpotLight'><div class='infoButton ca_appPopup'>Info<\/div><div class='supportButton supportButtonCardContext' id='supportJenkins1089' data-context='[{\"icon\":\"ca_fa-project\",\"link\":\"https:\\\/\\\/www.jenkins.io\\\/\",\"text\":\"Project\"},{\"icon\":\"ca_discord\",\"link\":\"https:\\\/\\\/discord.gg\\\/qWPbc8R\",\"text\":\"Discord\"},{\"icon\":\"ca_fa-support\",\"link\":\"https:\\\/\\\/github.com\\\/jenkinsci\\\/docker\\\/issues\",\"text\":\"Support Forum\"},{\"icon\":\"docker\",\"link\":\"https:\\\/\\\/hub.docker.com\\\/r\\\/jenkins\\\/jenkins\\\/\",\"text\":\"Registry\"}]'>Support<\/div><div class='actionsButton' data-pluginURL='' data-languagePack='' onclick=popupInstallXML('\/tmp\/community.applications\/tempFiles\/templates-community-apps\/SelfhostersUnraidDiscordRepository\/jenkins-Jenkins-latest.xml','default','','[\"8080\"]');>Install<\/div><span class='appDocker' title='This application is a docker container'><\/span><span class='favCardBackground' data-repository='Selfhosters Unraid Discord Repository' style='display:none;'><\/span><span class='pinnedCard' title='This application is pinned for later viewing' data-pindata='jenkins\/jenkinsJenkins' style='display:none;'><\/span><\/div><div class='ca_appPopup ca_backgroundClickable'><div class='ca_iconArea'><img class='ca_displayIcon ' src='https:\/\/raw.githubusercontent.com\/selfhosters\/unRAID-CA-templates\/master\/templates\/img\/jenkins.png' alt='Application Icon'><\/img><\/div><div class='ca_applicationName'>Jenkins<\/div><div class='ca_author'>Selfhosters<\/div><div class='cardCategory'>Productivity<\/div><\/div><div class='cardDescription ca_backgroundClickable'><div class='cardDesc'>The leading open source automation server, Jenkins provides hundreds of plugins to support building, deploying and automating any project. <\/div><\/div><\/div><div class='officialCardBackground'><div class='installedCardText ca_center' title='This is an official container'>OFFICIAL<\/div><\/div><div class='ca_holder spotlightHome ca_appPopup ' data-apppath='\/tmp\/community.applications\/tempFiles\/templates-community-apps\/DavidSpeksRepository\/rocker-rstudio-latest.xml' data-appname='rstudio' data-repository='DavidSpek&#039;s Repository' ><div class='ca_bottomLine ca_bottomLineSpotLight'><div class='infoButton ca_appPopup'>Info<\/div><div class='supportButton supportButtonCardContext' id='supportrstudio1217' data-context='[{\"icon\":\"ca_fa-project\",\"link\":\"https:\\\/\\\/github.com\\\/rocker-org\\\/rocker-versioned\",\"text\":\"Project\"},{\"icon\":\"docker\",\"link\":\"https:\\\/\\\/hub.docker.com\\\/r\\\/rocker\\\/rstudio\\\/\",\"text\":\"Registry\"}]'>Support<\/div><div class='actionsButton' data-pluginURL='' data-languagePack='' onclick=popupInstallXML('\/tmp\/community.applications\/tempFiles\/templates-community-apps\/DavidSpeksRepository\/rocker-rstudio-latest.xml','default','','[\"8787\",\"3838\"]');>Install<\/div><span class='appDocker' title='This application is a docker container'><\/span><span class='favCardBackground' data-repository='DavidSpeks Repository' style='display:none;'><\/span><span class='pinnedCard' title='This application is pinned for later viewing' data-pindata='rocker\/rstudiorstudio' style='display:none;'><\/span><\/div><div class='ca_appPopup ca_backgroundClickable'><div class='ca_iconArea'><img class='ca_displayIcon ' src='https:\/\/avatars0.githubusercontent.com\/u\/9100160?v=3&amp;s=200' alt='Application Icon'><\/img><\/div><div class='ca_applicationName'>rstudio<\/div><div class='ca_author'>DavidSpek&apos;s Repository<\/div><div class='cardCategory'>Productivity<\/div><\/div><div class='cardDescription ca_backgroundClickable'><div class='cardDesc'>NOTE First run is slow. RStudio Server with an emphasis on reproducibility. Builds on debian stable (debian:jessie for versions &lt; 3.4.0, debian:stretch after, etc) release. This stack installs a fixed version of R itself from source and it installs all R packages from a fixed snapshot of CRAN at a given date. Users should include the version tag, e.g. rocker\/rstudio:3.3.1 when reproduciblity is paramount. <\/div><\/div><\/div><div class='ca_holder spotlightHome ca_appPopup ' data-apppath='\/tmp\/community.applications\/tempFiles\/templates-community-apps\/LTMsRepository\/ncarlier-webhookd-latest.xml' data-appname='webhookd' data-repository='LTM&#039;s Repository' ><div class='ca_bottomLine ca_bottomLineSpotLight'><div class='infoButton ca_appPopup'>Info<\/div><div class='supportButton supportButtonCardContext' id='supportwebhookd2185' data-context='[{\"icon\":\"ca_fa-project\",\"link\":\"https:\\\/\\\/github.com\\\/ncarlier\\\/webhookd\",\"text\":\"Project\"},{\"icon\":\"ca_fa-support\",\"link\":\"https:\\\/\\\/github.com\\\/ncarlier\\\/webhookd\\\/issues?q=is%3Aissue\",\"text\":\"Support Forum\"},{\"icon\":\"docker\",\"link\":\"https:\\\/\\\/hub.docker.com\\\/r\\\/ncarlier\\\/webhookd\",\"text\":\"Registry\"}]'>Support<\/div><div class='actionsButton' data-pluginURL='' data-languagePack='' onclick=popupInstallXML('\/tmp\/community.applications\/tempFiles\/templates-community-apps\/LTMsRepository\/ncarlier-webhookd-latest.xml','default','','[\"8080\"]');>Install<\/div><span class='appDocker' title='This application is a docker container'><\/span><span class='favCardBackground' data-repository='LTMs Repository' style='display:none;'><\/span><span class='pinnedCard' title='This application is pinned for later viewing' data-pindata='ncarlier\/webhookd:latestwebhookd' style='display:none;'><\/span><\/div><div class='ca_appPopup ca_backgroundClickable'><div class='ca_iconArea'><img class='ca_displayIcon ' src='https:\/\/raw.githubusercontent.com\/LilTrublMakr\/ltm-unraid-templates\/master\/icons\/webhookd.png' alt='Application Icon'><\/img><\/div><div class='ca_applicationName'>webhookd<\/div><div class='ca_author'>LTM&apos;s Repository<\/div><div class='cardCategory'>Tools<\/div><\/div><div class='cardDescription ca_backgroundClickable'><div class='cardDesc'>A very simple webhook server to launch shell scripts. <\/div><\/div><\/div><div class='ca_holder spotlightHome ca_appPopup ' data-apppath='\/tmp\/community.applications\/tempFiles\/templates-community-apps\/AhmadsRepository\/verdaccio-Verdaccio-latest.xml' data-appname='Verdaccio' data-repository='Ahmad&#039;s Repository' ><div class='ca_bottomLine ca_bottomLineSpotLight'><div class='infoButton ca_appPopup'>Info<\/div><div class='supportButton supportButtonCardContext' id='supportVerdaccio2177' data-context='[{\"icon\":\"ca_fa-project\",\"link\":\"https:\\\/\\\/verdaccio.org\\\/\",\"text\":\"Project\"},{\"icon\":\"ca_fa-support\",\"link\":\"https:\\\/\\\/forums.unraid.net\\\/topic\\\/126755-support-ahmadnassris-templates\\\/\",\"text\":\"Support Forum\"},{\"icon\":\"docker\",\"link\":\"https:\\\/\\\/hub.docker.com\\\/r\\\/verdaccio\\\/verdaccio\\\/\",\"text\":\"Registry\"}]'>Support<\/div><div class='actionsButton' data-pluginURL='' data-languagePack='' onclick=popupInstallXML('\/tmp\/community.applications\/tempFiles\/templates-community-apps\/AhmadsRepository\/verdaccio-Verdaccio-latest.xml','default','','[\"4873\"]');>Install<\/div><span class='appDocker' title='This application is a docker container'><\/span><span class='favCardBackground' data-repository='Ahmads Repository' style='display:none;'><\/span><span class='pinnedCard' title='This application is pinned for later viewing' data-pindata='verdaccio\/verdaccioVerdaccio' style='display:none;'><\/span><\/div><div class='ca_appPopup ca_backgroundClickable'><div class='ca_iconArea'><img class='ca_displayIcon ' src='https:\/\/verdaccio.org\/img\/logo\/uk\/verdaccio-tiny-uk-no-bg.png' alt='Application Icon'><\/img><\/div><div class='ca_applicationName'>Verdaccio<\/div><div class='ca_author'>Ahmad&apos;s Repository<\/div><div class='cardCategory'>Tools<\/div><\/div><div class='cardDescription ca_backgroundClickable'><div class='cardDesc'>Verdaccio is a simple, zero-config-required local private NPM registry. No need for an entire database just to get started. Verdaccio comes out of the box with its own tiny database, and the ability to proxy other registries (eg. npmjs.org), also introduces caching the downloaded modules along the way. For those who are looking to extend their storage capabilities, Verdaccio supports various community-made plugins to hook into services such as Amazon's S3, Google Cloud Storage or create your own plugin. <\/div><\/div><\/div><div class='officialCardBackground'><div class='installedCardText ca_center' title='This is an official container'>OFFICIAL<\/div><\/div><script>data.currentpage = 1;<\/script><\/div><div class='ca_homeTemplatesHeader'>Top New Installs<\/div><div class='ca_homeTemplatesLine2'>These apps have the highest percentage of new installs <span class='homeMore' data-des='Top New Installs' data-category='All' data-sortby='topPerforming' data-sortdir='Down'>SHOW MORE<\/div><div class='ca_homeTemplates caHomeSpotlight'><script>addDockerWarning(false);var dockerNotEnabled = false;<\/script><script>changeMax(24);<\/script><div class='ca_holder spotlightHome ca_appPopup ' data-apppath='\/tmp\/community.applications\/tempFiles\/templates-community-apps\/IBRACORPsRepository\/pomerium-Pomerium-latest.xml' data-appname='Pomerium' data-repository='IBRACORP&#039;s Repository' ><div class='ca_bottomLine ca_bottomLineSpotLight'><div class='infoButton ca_appPopup'>Info<\/div><div class='supportButton supportButtonCardContext' id='supportPomerium1469' data-context='[{\"icon\":\"ca_fa-project\",\"link\":\"https:\\\/\\\/github.com\\\/pomerium\\\/pomerium\",\"text\":\"Project\"},{\"icon\":\"ca_discord\",\"link\":\"https:\\\/\\\/discord.gg\\\/VWAG7rZ\",\"text\":\"Discord\"},{\"icon\":\"ca_fa-support\",\"link\":\"https:\\\/\\\/discord.gg\\\/VWAG7rZ\",\"text\":\"Support Forum\"},{\"icon\":\"docker\",\"link\":\"https:\\\/\\\/hub.docker.com\\\/r\\\/pomerium\\\/pomerium\",\"text\":\"Registry\"}]'>Support<\/div><div class='actionsButton' data-pluginURL='' data-languagePack='' onclick=popupInstallXML('\/tmp\/community.applications\/tempFiles\/templates-community-apps\/IBRACORPsRepository\/pomerium-Pomerium-latest.xml','default','','[\"1443\",\"180\",\"5443\"]');>Install<\/div><span class='appDocker' title='This application is a docker container'><\/span><span class='favCardBackground' data-repository='IBRACORPs Repository' style='display:none;'><\/span><span class='pinnedCard' title='This application is pinned for later viewing' data-pindata='pomerium\/pomeriumPomerium' style='display:none;'><\/span><\/div><div class='ca_appPopup ca_backgroundClickable'><div class='ca_iconArea'><img class='ca_displayIcon ' src='https:\/\/i.imgur.com\/oF39h9B.png' alt='Application Icon'><\/img><\/div><div class='ca_applicationName'>Pomerium<\/div><div class='ca_author'>IBRACORP&apos;s Repository<\/div><div class='cardCategory'>Productivity<\/div><\/div><div class='cardDescription ca_backgroundClickable'><div class='cardDesc'>Pomerium is an identity-aware proxy that enables secure access to internal applications. Pomerium provides a standardized interface to add access control to applications regardless of whether the application itself has authorization or authentication baked-in. Pomerium gateways both internal and external requests, and can be used in situations where you'd typically reach for a VPN. Check ports to ensure you do not have conflicts. NOTE You MUST: 1.Create a config.yaml file in appdata\/pomerium\/pomerium. The parameters for the file can be found here: https:\/\/www.pomerium.io\/reference\/ 2. Match your cookie secret in both the file and the variable below. <\/div><\/div><\/div><div class='officialCardBackground'><div class='installedCardText ca_center' title='This is an official container'>OFFICIAL<\/div><\/div><div class='ca_holder spotlightHome ca_appPopup ' data-apppath='\/tmp\/community.applications\/tempFiles\/templates-community-apps\/IBRACORPsRepository\/fallenbagel-jellyseerr-latest.xml' data-appname='jellyseerr' data-repository='IBRACORP&#039;s Repository' ><div class='ca_bottomLine ca_bottomLineSpotLight'><div class='infoButton ca_appPopup'>Info<\/div><div class='supportButton supportButtonCardContext' id='supportjellyseerr1463' data-context='[{\"icon\":\"ca_fa-project\",\"link\":\"https:\\\/\\\/github.com\\\/Fallenbagel\\\/jellyseerr\",\"text\":\"Project\"},{\"icon\":\"ca_discord\",\"link\":\"https:\\\/\\\/discord.gg\\\/VWAG7rZ\",\"text\":\"Discord\"},{\"icon\":\"ca_fa-support\",\"link\":\"https:\\\/\\\/discord.gg\\\/VWAG7rZ\",\"text\":\"Support Forum\"},{\"icon\":\"docker\",\"link\":\"https:\\\/\\\/hub.docker.com\\\/r\\\/fallenbagel\\\/jellyseerr\\\/\",\"text\":\"Registry\"}]'>Support<\/div><div class='actionsButton' data-pluginURL='' data-languagePack='' onclick=popupInstallXML('\/tmp\/community.applications\/tempFiles\/templates-community-apps\/IBRACORPsRepository\/fallenbagel-jellyseerr-latest.xml','default','This&#32;template&#32;is&#32;set&#32;up&#32;to&#32;use&#32;a&#32;custom&#32;network.&#32;You&#32;may&#32;have&#32;to&#32;adjust&#32;the&#32;network&#32;or&#32;IP&#32;address&#32;etc&#32;to&#32;match&#32;your&#32;system&#32;&#32;','');>Install<\/div><span class='appDocker' title='This application is a docker container'><\/span><span class='favCardBackground' data-repository='IBRACORPs Repository' style='display:none;'><\/span><span class='pinnedCard' title='This application is pinned for later viewing' data-pindata='fallenbagel\/jellyseerr:latestjellyseerr' style='display:none;'><\/span><\/div><div class='ca_appPopup ca_backgroundClickable'><div class='ca_iconArea'><img class='ca_displayIcon ' src='https:\/\/raw.githubusercontent.com\/Fallenbagel\/jellyseerr\/main\/public\/android-chrome-512x512.png' alt='Application Icon'><\/img><\/div><div class='ca_applicationName'>jellyseerr&nbsp;<span class='ca_fa-comment cardWarning' title='Click info to see the notes regarding this application'><\/span><\/div><div class='ca_author'>IBRACORP&apos;s Repository<\/div><div class='cardCategory'>Downloaders<\/div><\/div><div class='cardDescription ca_backgroundClickable'><div class='cardDesc'>Jellyseerr is a free and open-source software application for managing requests for your media library. It is a fork of Overseerr built to bring support for Jellyfin &amp; Emby media servers! To enable Emby support please add the variable 'JELLYFIN_TYPE=emby' in the template. This project is constantly updating with new features and bug fixes. See the GitHub page for current and developing features! https:\/\/github.com\/Fallenbagel\/jellyseerr\/ <\/div><\/div><\/div><div class='ca_holder spotlightHome ca_appPopup ' data-apppath='\/tmp\/community.applications\/tempFiles\/templates-community-apps\/LeonStoldtsRepository\/ghostfolio-Ghostfolio-latest.xml' data-appname='Ghostfolio' data-repository='LeonStoldt&#039;s Repository' ><div class='ca_bottomLine ca_bottomLineSpotLight'><div class='infoButton ca_appPopup'>Info<\/div><div class='supportButton supportButtonCardContext' id='supportGhostfolio2125' data-context='[{\"icon\":\"ca_fa-project\",\"link\":\"https:\\\/\\\/ghostfol.io\\\/\",\"text\":\"Project\"},{\"icon\":\"ca_fa-support\",\"link\":\"https:\\\/\\\/forums.unraid.net\\\/topic\\\/123829-support-community-applications-ghostfolio\\\/\",\"text\":\"Support Forum\"},{\"icon\":\"docker\",\"link\":\"https:\\\/\\\/hub.docker.com\\\/r\\\/ghostfolio\\\/ghostfolio\\\/\",\"text\":\"Registry\"}]'>Support<\/div><div class='actionsButton' data-pluginURL='' data-languagePack='' onclick=popupInstallXML('\/tmp\/community.applications\/tempFiles\/templates-community-apps\/LeonStoldtsRepository\/ghostfolio-Ghostfolio-latest.xml','default','','[\"3333\"]');>Install<\/div><span class='appDocker' title='This application is a docker container'><\/span><span class='favCardBackground' data-repository='LeonStoldts Repository' style='display:none;'><\/span><span class='pinnedCard' title='This application is pinned for later viewing' data-pindata='ghostfolio\/ghostfolioGhostfolio' style='display:none;'><\/span><\/div><div class='ca_appPopup ca_backgroundClickable'><div class='ca_iconArea'><img class='ca_displayIcon ' src='https:\/\/avatars.githubusercontent.com\/u\/82473144?s=200' alt='Application Icon'><\/img><\/div><div class='ca_applicationName'>Ghostfolio<\/div><div class='ca_author'>LeonStoldt&apos;s Repository<\/div><div class='cardCategory'>Tools<\/div><\/div><div class='cardDescription ca_backgroundClickable'><div class='cardDesc'>This Community Application provides the official Ghostfolio container. Ghostfolio is an open source wealth management software built with web technology. The application empowers busy people to keep track of stocks, ETFs or cryptocurrencies and make solid, data-driven investment decisions. Project Page: https:\/\/ghostfol.io\/ GitHub Repository: https:\/\/github.com\/ghostfolio\/ghostfolio CAUTION! Ghostfolio requires a Postgres and Redis instance to run. Make sure to set them up first and reference the required variables down below. A detailed description of how to setup ghostfolio can be found in the Support Thread: https:\/\/forums.unraid.net\/topic\/123829-support-community-applications-ghostfolio\/ <\/div><\/div><div class='homespotlightIconArea ca_center''><div><img class='spotlightIcon' src='https:\/\/github.com\/Squidly271\/community.applications\/raw\/master\/webImages\/spotlight_white.png' alt='Spotlight'><\/img><\/div><div class='spotlightDate'>Sep 2022<\/div><\/div><\/div><div class='officialCardBackground'><div class='installedCardText ca_center' title='This is an official container'>OFFICIAL<\/div><\/div><div class='ca_holder spotlightHome ca_appPopup ' data-apppath='\/tmp\/community.applications\/tempFiles\/templates-community-apps\/SelfhostersUnraidDiscordRepository\/jenkins-Jenkins-latest.xml' data-appname='Jenkins' data-repository='Selfhosters Unraid Discord Repository' ><div class='ca_bottomLine ca_bottomLineSpotLight'><div class='infoButton ca_appPopup'>Info<\/div><div class='supportButton supportButtonCardContext' id='supportJenkins1089' data-context='[{\"icon\":\"ca_fa-project\",\"link\":\"https:\\\/\\\/www.jenkins.io\\\/\",\"text\":\"Project\"},{\"icon\":\"ca_discord\",\"link\":\"https:\\\/\\\/discord.gg\\\/qWPbc8R\",\"text\":\"Discord\"},{\"icon\":\"ca_fa-support\",\"link\":\"https:\\\/\\\/github.com\\\/jenkinsci\\\/docker\\\/issues\",\"text\":\"Support Forum\"},{\"icon\":\"docker\",\"link\":\"https:\\\/\\\/hub.docker.com\\\/r\\\/jenkins\\\/jenkins\\\/\",\"text\":\"Registry\"}]'>Support<\/div><div class='actionsButton' data-pluginURL='' data-languagePack='' onclick=popupInstallXML('\/tmp\/community.applications\/tempFiles\/templates-community-apps\/SelfhostersUnraidDiscordRepository\/jenkins-Jenkins-latest.xml','default','','[\"8080\"]');>Install<\/div><span class='appDocker' title='This application is a docker container'><\/span><span class='favCardBackground' data-repository='Selfhosters Unraid Discord Repository' style='display:none;'><\/span><span class='pinnedCard' title='This application is pinned for later viewing' data-pindata='jenkins\/jenkinsJenkins' style='display:none;'><\/span><\/div><div class='ca_appPopup ca_backgroundClickable'><div class='ca_iconArea'><img class='ca_displayIcon ' src='https:\/\/raw.githubusercontent.com\/selfhosters\/unRAID-CA-templates\/master\/templates\/img\/jenkins.png' alt='Application Icon'><\/img><\/div><div class='ca_applicationName'>Jenkins<\/div><div class='ca_author'>Selfhosters<\/div><div class='cardCategory'>Productivity<\/div><\/div><div class='cardDescription ca_backgroundClickable'><div class='cardDesc'>The leading open source automation server, Jenkins provides hundreds of plugins to support building, deploying and automating any project. <\/div><\/div><\/div><div class='officialCardBackground'><div class='installedCardText ca_center' title='This is an official container'>OFFICIAL<\/div><\/div><div class='ca_holder spotlightHome ca_appPopup ' data-apppath='\/tmp\/community.applications\/tempFiles\/templates-community-apps\/SmartPhoneLoversRepository\/fireflyiii-FireflyIIIImporter-latest.xml' data-appname='Firefly-III-Importer' data-repository='SmartPhoneLover&#039;s Repository' ><div class='ca_bottomLine ca_bottomLineSpotLight'><div class='infoButton ca_appPopup'>Info<\/div><div class='supportButton supportButtonCardContext' id='supportFireflyIIIImporter1938' data-context='[{\"icon\":\"ca_fa-project\",\"link\":\"https:\\\/\\\/github.com\\\/firefly-iii\\\/data-importer\",\"text\":\"Project\"},{\"icon\":\"ca_fa-support\",\"link\":\"https:\\\/\\\/forums.unraid.net\\\/topic\\\/124146-support-smartphonelover-firefly-iii-data-importer\\\/\",\"text\":\"Support Forum\"},{\"icon\":\"docker\",\"link\":\"https:\\\/\\\/hub.docker.com\\\/r\\\/fireflyiii\\\/data-importer\",\"text\":\"Registry\"}]'>Support<\/div><div class='actionsButton' data-pluginURL='' data-languagePack='' onclick=popupInstallXML('\/tmp\/community.applications\/tempFiles\/templates-community-apps\/SmartPhoneLoversRepository\/fireflyiii-FireflyIIIImporter-latest.xml','default','This&#32;application&#32;has&#32;additional&#32;requirements&lt;br&gt;&lt;ul&gt;&lt;li&gt;Firefly&#32;III&#32;instance&lt;\/li&gt;&lt;\/ul&gt;&lt;br&gt;','[\"4576\"]');>Install<\/div><span class='appDocker' title='This application is a docker container'><\/span><span class='favCardBackground' data-repository='SmartPhoneLovers Repository' style='display:none;'><\/span><span class='pinnedCard' title='This application is pinned for later viewing' data-pindata='fireflyiii\/data-importer:latestFirefly III Importer' style='display:none;'><\/span><\/div><div class='ca_appPopup ca_backgroundClickable'><div class='ca_iconArea'><img class='ca_displayIcon ' src='https:\/\/raw.githubusercontent.com\/SmartPhoneLover\/unraid-docker-templates\/main\/templates\/icons\/firefly-iii-data-importer.png' alt='Application Icon'><\/img><\/div><div class='ca_applicationName'>Firefly-III-Importer&nbsp;<span class=' cardWarning' title=''><\/span><\/div><div class='ca_author'>SmartPhoneLover&apos;s Repository<\/div><div class='cardCategory'>Crypto<\/div><\/div><div class='cardDescription ca_backgroundClickable'><div class='cardDesc'>DESCRIPTION The Data Importer helps you to import transactions into Firefly III. It is separated from Firefly III for security and maintenance reasons. The Data Importer does not connect to your bank directly. Instead, it uses Nordigen and SaltEdge to connect to over 6000 banks worldwide. These services are free for Firefly III users, but require registration. Keep in mind these services have their own privacy and data usage policies. The Data Importer can import CSV files you've downloaded from your bank. You can run the Data Importer once, for a bulk import. You can also run it regularly to keep up with new transactions. NOTES \u2022 Available tags for this docker image: 'latest' (stable) and 'develop'. \u2022 To generate your token, go to: Firefly III > Options > Profile > OAuth > 'Personal Access Tokens'. \u2022 There are other variables that you can use, if needed. Check the '.env.example' file of the GitHub repo to know more. \u2022 When setting both 'FIREFLY_III_URL' and\/or 'VANITY_URL', make sure to add 'http:\/\/' or 'https:\/\/', even if in local, and remove any trailing slash at the end of it. \u2022 Use the 'Reauthenticate' button if you have re-generated your token, or if you may suffer any other issue while trying to connect to Firefly. \u2022 Memcached and Redis are not required, but you can connect them to Firefly III Data Importer if you experience any performance issues. Check the '.env.example' file of the GitHub repo to know more. VERSION 1.0 (2022-05-28) <\/div><\/div><\/div><script>data.currentpage = 1;<\/script><\/div><div class='ca_homeTemplatesHeader'>Random Apps<\/div><div class='ca_homeTemplatesLine2'>An assortment of randomly chosen apps <span class='homeMore' data-des='Random Apps' data-category='All' data-sortby='random' data-sortdir='Down'>SHOW MORE<\/div><div class='ca_homeTemplates caHomeSpotlight'><script>addDockerWarning(false);var dockerNotEnabled = false;<\/script><script>changeMax(24);<\/script><div class='ca_holder spotlightHome ca_appPopup ' data-apppath='\/tmp\/community.applications\/tempFiles\/templates-community-apps\/ich777sRepository\/ich777-MinecraftBasicServer-latest.xml' data-appname='MinecraftBasicServer' data-repository='ich777&#039;s Repository' ><div class='ca_bottomLine ca_bottomLineSpotLight'><div class='infoButton ca_appPopup'>Info<\/div><div class='supportButton supportButtonCardContext' id='supportMinecraftBasicServer915' data-context='[{\"icon\":\"ca_fa-project\",\"link\":\"https:\\\/\\\/www.minecraft.net\\\/\",\"text\":\"Project\"},{\"icon\":\"ca_fa-support\",\"link\":\"https:\\\/\\\/forums.unraid.net\\\/topic\\\/79530-support-ich777-gameserver-dockers\\\/\",\"text\":\"Support Forum\"},{\"icon\":\"docker\",\"link\":\"https:\\\/\\\/hub.docker.com\\\/r\\\/ich777\\\/minecraftbasicserver\\\/\",\"text\":\"Registry\"}]'>Support<\/div><div class='actionsButton' data-pluginURL='' data-languagePack='' onclick=popupInstallXML('\/tmp\/community.applications\/tempFiles\/templates-community-apps\/ich777sRepository\/ich777-MinecraftBasicServer-latest.xml','default','','[\"25565\",\"25575\",\"9011\"]');>Install<\/div><span class='appDocker' title='This application is a docker container'><\/span><span class='favCardBackground' data-repository='ich777s Repository' style='display:none;'><\/span><span class='pinnedCard' title='This application is pinned for later viewing' data-pindata='ich777\/minecraftbasicserverMinecraftBasicServer' style='display:none;'><\/span><\/div><div class='ca_appPopup ca_backgroundClickable'><div class='ca_iconArea'><img class='ca_displayIcon ' src='https:\/\/raw.githubusercontent.com\/ich777\/docker-templates\/master\/ich777\/images\/mc.png' alt='Application Icon'><\/img><\/div><div class='ca_applicationName'>MinecraftBasicServer<\/div><div class='ca_author'>ich777&apos;s Repository<\/div><div class='cardCategory'>GameServers<\/div><\/div><div class='cardDescription ca_backgroundClickable'><div class='cardDesc'>This is a Basic Minecraft Server, with the basic configuration it will download and install a Vanilla Minecraft. You can also install a FTB (FeedTheBeast), Bukkit, Spigot,... server. Start the container for the first time let it do it's work and shut it down. After that copy over your favorite server executable (don't forget to set the Serverfile name to the same as you copied over) and start the container again. JAVA RUNTIME: Enter your prefered Runtime 'basicjre'=jre8, 'jre11'=jre11, 'jre15'=jre15 Don't change unless you are knowing what you are doing! Please keep in mind if you change the runtime you have to delete the old runtime before UPDATE: If you set the variable GAME_V to 'latest' the container will check on every restart if there is a newer version available (if set to 'latest' the variable JAR_NAME has to be 'server'). ATTENTION: Don't forget to accept the EULA down below and don't forget to edit the 'server.properties' file the server is by default configured to be a LAN server and to be not snooped. WEB CONSOLE: You can connect to the Minecraft console by opening your browser and go to HOSTIP:9011 (eg: 192.168.1.1:9011) or click on WebUI on the Docker page within Unraid. <\/div><\/div><\/div><div class='ca_holder spotlightHome ca_appPopup ' data-apppath='\/tmp\/community.applications\/tempFiles\/templates-community-apps\/LongYunarsRepository\/onething1-wxedge-latest.xml' data-appname='wxedge' data-repository='LongYunar&#039;s Repository' ><div class='ca_bottomLine ca_bottomLineSpotLight'><div class='infoButton ca_appPopup'>Info<\/div><div class='supportButton'><span class='ca_href' data-href='https:\/\/registry.hub.docker.com\/r\/onething1\/wxedge' data-target='_blank'>Registry<\/span><\/div><div class='actionsButton' data-pluginURL='' data-languagePack='' onclick=popupInstallXML('\/tmp\/community.applications\/tempFiles\/templates-community-apps\/LongYunarsRepository\/onething1-wxedge-latest.xml','default','This&#32;template&#32;is&#32;set&#32;up&#32;to&#32;run&#32;as&#32;Privileged.&#32;&#32;This&#32;is&#32;a&#32;possible&#32;security&#32;risk&#32;and&#32;usually&#32;does&#32;not&#32;need&#32;to&#32;be&#32;enabled.&#32;&#32;Note&#32;that&#32;some&#32;applications&#32;require&#32;privileged&#32;in&#32;order&#32;to&#32;operate&#32;correctly&#32;&#32;','');>Install<\/div><span class='appDocker' title='This application is a docker container'><\/span><span class='favCardBackground' data-repository='LongYunars Repository' style='display:none;'><\/span><span class='pinnedCard' title='This application is pinned for later viewing' data-pindata='onething1\/wxedgewxedge' style='display:none;'><\/span><\/div><div class='ca_appPopup ca_backgroundClickable'><div class='ca_iconArea'><img class='ca_displayIcon ' src='https:\/\/s1.ax1x.com\/2023\/02\/01\/pSDMZ9A.png' alt='Application Icon'><\/img><\/div><div class='ca_applicationName'>wxedge&nbsp;<span class='ca_fa-comment cardWarning' title='Click info to see the notes regarding this application'><\/span><\/div><div class='ca_author'>LongYunar&apos;s Repository<\/div><div class='cardCategory'>Other<\/div><\/div><div class='cardDescription ca_backgroundClickable'><div class='cardDesc'>\u7f51\u5fc3\u4e91 <\/div><\/div><\/div><div class='ca_holder spotlightHome ca_appPopup ' data-apppath='\/tmp\/community.applications\/tempFiles\/templates-community-apps\/zhtengwsRepository\/zhtengw-Inteli915SRIOV-\/\/raw.githubusercontent.com\/zhtengw\/unraid-i915-sriov\/master\/i915-sriov.plg.xml' data-appname='Intel i915 SR-IOV' data-repository='zhtengw&#039;s Repository' data-pluginurl='https:\/\/raw.githubusercontent.com\/zhtengw\/unraid-i915-sriov\/master\/i915-sriov.plg'><div class='ca_bottomLine ca_bottomLineSpotLight'><div class='infoButton ca_appPopup'>Info<\/div><div class='supportButton'><span class='ca_href' data-href='https:\/\/forums.unraid.net\/topic\/136621-unraid-kernel-with-igpu-sr-iov-support\/' data-target='_blank'>Support Forum<\/span><\/div><div class='actionsButton' data-pluginURL='https:\/\/raw.githubusercontent.com\/zhtengw\/unraid-i915-sriov\/master\/i915-sriov.plg' data-languagePack='' onclick=installPlugin('https:\/\/raw.githubusercontent.com\/zhtengw\/unraid-i915-sriov\/master\/i915-sriov.plg&incompatible','','','');>Install<\/div><span class='appDriver' title='This application is a driver (plugin)'><\/span><span class='favCardBackground' data-repository='zhtengws Repository' style='display:none;'><\/span><span class='pinnedCard' title='This application is pinned for later viewing' data-pindata='https:\/\/raw.githubusercontent.com\/zhtengw\/unraid-i915-sriov\/master\/i915-sriov.plgIntel i915 SR IOV' style='display:none;'><\/span><\/div><div class='ca_appPopup ca_backgroundClickable'><div class='ca_iconArea'><img class='ca_displayIcon ' src='https:\/\/raw.githubusercontent.com\/zhtengw\/unraid-templates\/master\/i915-sriov\/intel-sr-iov.png' alt='Application Icon'><\/img><\/div><div class='ca_applicationName'>Intel i915 SR-IOV<\/div><div class='ca_author'>zhtengw&apos;s Repository<\/div><div class='cardCategory'>Productivity<\/div><\/div><div class='cardDescription ca_backgroundClickable'><div class='cardDesc'>Intel Graphics SR-IOV is Intel's latest virtualization technology for graphics. Single Root I\/O Virtualization (SR-IOV) defines a standard method for sharing a physical device function by partitioning the device into multiple virtual functions. Each virtual function is directly assigned to a virtual machine, thereby achieving near-native performance for the virtual machine. Check the link below to confirm if your integrated graphics support SR-IOV. https:\/\/www.intel.com\/content\/www\/us\/en\/support\/articles\/000093216\/graphics.html <\/div><\/div><\/div><div class='betaCardBackground'><div class='installedCardText ca_center'>BETA<\/div><\/div><div class='ca_holder spotlightHome ca_appPopup ' data-apppath='\/tmp\/community.applications\/tempFiles\/templates-community-apps\/tritonesRepository\/maxmindinc-geoipupdate-latest.xml' data-appname='geoipupdate' data-repository='tritones&#039; Repository' ><div class='ca_bottomLine ca_bottomLineSpotLight'><div class='infoButton ca_appPopup'>Info<\/div><div class='supportButton supportButtonCardContext' id='supportgeoipupdate2134' data-context='[{\"icon\":\"ca_fa-project\",\"link\":\"https:\\\/\\\/github.com\\\/maxmind\\\/geoipupdate\",\"text\":\"Project\"},{\"icon\":\"ca_fa-support\",\"link\":\"https:\\\/\\\/github.com\\\/maxmind\\\/geoipupdate\\\/issues\",\"text\":\"Support Forum\"},{\"icon\":\"docker\",\"link\":\"https:\\\/\\\/hub.docker.com\\\/r\\\/maxmindinc\\\/geoipupdate\\\/\",\"text\":\"Registry\"}]'>Support<\/div><div class='actionsButton' data-pluginURL='' data-languagePack='' onclick=popupInstallXML('\/tmp\/community.applications\/tempFiles\/templates-community-apps\/tritonesRepository\/maxmindinc-geoipupdate-latest.xml','default','','[]');>Install<\/div><span class='appDocker' title='This application is a docker container'><\/span><span class='favCardBackground' data-repository='tritones Repository' style='display:none;'><\/span><span class='pinnedCard' title='This application is pinned for later viewing' data-pindata='maxmindinc\/geoipupdategeoipupdate' style='display:none;'><\/span><\/div><div class='ca_appPopup ca_backgroundClickable'><div class='ca_iconArea'><img class='ca_displayIcon ' src='https:\/\/raw.githubusercontent.com\/tritones\/unraid-templates\/main\/templates\/img\/geoipupdate.png' alt='Application Icon'><\/img><\/div><div class='ca_applicationName'>geoipupdate<\/div><div class='ca_author'>tritones&apos;s Repository<\/div><div class='cardCategory'>Tools<\/div><\/div><div class='cardDescription ca_backgroundClickable'><div class='cardDesc'>The MaxMind GeoIP Update program performs automatic updates of GeoIP2 and GeoIP Legacy binary databases. CSV databases are not supported. https:\/\/hub.docker.com\/r\/maxmindinc\/geoipupdate\/ <\/div><\/div><\/div><div class='ca_holder spotlightHome ca_appPopup ' data-apppath='\/tmp\/community.applications\/tempFiles\/templates-community-apps\/mguttsRepository\/otherguy-Dropboxbyotherguy-latest.xml' data-appname='Dropbox-by-otherguy' data-repository='mgutt&#039;s Repository' ><div class='ca_bottomLine ca_bottomLineSpotLight'><div class='infoButton ca_appPopup'>Info<\/div><div class='supportButton supportButtonCardContext' id='supportDropboxbyotherguy1583' data-context='[{\"icon\":\"ca_fa-project\",\"link\":\"https:\\\/\\\/github.com\\\/otherguy\\\/docker-dropbox\",\"text\":\"Project\"},{\"icon\":\"ca_fa-support\",\"link\":\"https:\\\/\\\/forums.unraid.net\\\/topic\\\/104437-support-dropbox-by-otherguy\\\/\",\"text\":\"Support Forum\"},{\"icon\":\"docker\",\"link\":\"https:\\\/\\\/hub.docker.com\\\/r\\\/otherguy\\\/dropbox\",\"text\":\"Registry\"}]'>Support<\/div><div class='actionsButton' data-pluginURL='' data-languagePack='' onclick=popupInstallXML('\/tmp\/community.applications\/tempFiles\/templates-community-apps\/mguttsRepository\/otherguy-Dropboxbyotherguy-latest.xml','default','','[]');>Install<\/div><span class='appDocker' title='This application is a docker container'><\/span><span class='favCardBackground' data-repository='mgutts Repository' style='display:none;'><\/span><span class='pinnedCard' title='This application is pinned for later viewing' data-pindata='otherguy\/dropboxDropbox by otherguy' style='display:none;'><\/span><\/div><div class='ca_appPopup ca_backgroundClickable'><div class='ca_iconArea'><img class='ca_displayIcon ' src='https:\/\/raw.githubusercontent.com\/mgutt\/unraid-docker-templates\/main\/mgutt\/images\/dropbox.png' alt='Application Icon'><\/img><\/div><div class='ca_applicationName'>Dropbox-by-otherguy<\/div><div class='ca_author'>mgutt&apos;s Repository<\/div><div class='cardCategory'>Cloud<\/div><\/div><div class='cardDescription ca_backgroundClickable'><div class='cardDesc'>Dropbox client which syncs a local path with your cloud. Manual: After installing the Dropbox container - open the container overview - click on the logs icon - wait until you are prompted to visit a Dropbox URL - Copy and Paste the URL and link the container with your Dropbox account - the container automatically starts syncing IMPORTANT: The official Dropbox client (which is used in this container) does not support FUSE filesystems. Because of that its NOT possible to use the path \"\/mnt\/user\" as your user file path. You MUST use one of these direct disk paths: If your Dropbox share has the cache setting \"No\": \/mnt\/disk1\/Dropbox If your \"Dropbox\" share has the cache setting \"Only\": \/mnt\/cache\/Dropbox You could even use \"\/mnt\/disk1\/Dropbox\" with the cache Option \"Yes\", but if you add new files to this share, they won't be uploaded to Dropbox as long the Mover did not move them to the array. <\/div><\/div><\/div><script>data.currentpage = 1;<\/script><\/div>","script":"$('#templateSortButtons,#sortButtons,.maxPerPage').hide();$('.ca_holder').addClass('mobileHolderFix');"} mountain-diagnostics-20230609-1940.zip

Likewise. I reviewed my logs from the time I took my firewall offline for the update to when it returned, and all the way through the end of the logs. Nothing seems to indicate why it went offline and stopped knowing how to get to the gateway. In my last docker service restart I changed my "Host access to custom networks:" from enabled to disabled and it appears to have removed two routes from the table. 10.15.0.0/25 and 10.15.0.128/25 are no longer listed. I don't see how these would affect the server itself from getting to its gateway though. But possibly related since the stopping of the docker service restored the traffic flow?

That is very odd. I have it set to IPv4 only. Is there somewhere else I need to check/disable it?

I stopped all my dockers, and the docker service, and outbound connectivity was restored. Any hints as to what to look for within my dockers to pinpoint the issue? Restarting the docker service and images and everything is still working as expected.

My server lost its capability to egress out again tonight. I think I've narrowed it down, but I don't know why. I upgraded my firewall software today so the server was without internet access for about 45 minutes. I cannot sign into the My Server plugin. Any plugin or docker update checks fail, but I can successfully access my reverse proxy and I have active external plex streams going on. A simple reboot will resolve this but is there another way that I can/should be restarting the network services? Any idea why the server just stops getting out after my firewall is down for a little bit? Why would a traceroute from the server start and stop with itself? Is the default route listed as a FQDN the issue? It is not defined this way within my settings.

I looked more at my firewall logs. The last good traffic was at 12:10 AM (PT) and the first broadcast traffic start at 12:20 AM. Looking at the syslog for this time, the Mover finished at 12:00 AM and then my HDD drives started sleeping at 1:35 AM. Still don't know the root cause.

In the syslog log, I see Dec 1 22:36:50 unRAID kernel: traps: PMS GTP[26851] general protection fault ip:153c257137d0 sp:153c1622f348 error:0 in ld-musl-x86_64.so.1[153c25703000+53000] The " err" before this was in regards to the VM Backup plugin not connecting to my Synology NAS in a timely fashion. But I don't think the blocked traffic is related to this fault. Unless it takes a few days to manifest. Continuing looking at the syslog, the first Fix Common Problems error I see if Dec 7th, where it couldn't communicate with github. So between the 1st and 6th, everything was fine. Somewhere on the 7th, or night of the 6th, things went South The only other "error" in the logs, during and after the egress traffic being blocked is a time sync error. unRAID ntpd[1424]: kernel reports TIME_ERROR: 0x41: Clock Unsynchronized

Twice now my unRAID server starts acting odd. I notice it when all my Dockers show that Unavailable version notice instead. If I try to ping to 1.1.1.1 or anything beyond my firewall, they fail. Curls outbound fail to connect as well. Looking at my firewall logs, everything from the server is being broadcast to 10.15.0.255 over nbdatagram (UDP/138). I can ping anything internally no problem. The only thing I have found to resolve this is to reboot my unraid. I don't want to get into the habit of weekly reboots. Is there anything within the attached diags reports that pinpoint the issue? Diag ending in 904 is *during* the issue. Diag ending in 913 is *after* the reboot and things are working. And my firewall logs show traffic egressing over all the expected ports. unraid-diagnostics-20221208-0913.zip unraid-diagnostics-20221208-0904.zip

I moved my appdata and system data off to the array and my nvme drive still had 155 GB being reported in use. Calculate space showed 800k, which there was some lingering appdata from my Plex server. Subtitles, meta data, etc. I ultimately stopped the array, removed the nmve drives from the pool, restarted the array, stopped it again, adding the drives back to the pool, and restarted the array again. 3.5 MB was now reported in use. As expected with nothing on it. Still a mystery what was taking up the ~155 GB. The usage would change over time, as you can see through this thread.

Done, but unfortunately not much changed. I did change my advanced docker settings to enable log rotation, but I had already manually truncated my logs. Calculated space still shows 89 GB used where the pool shows 263 GB. Still an unknown 174 GB being used somewhere.

Didn't even know defragging within unRAID was a thing. Am I correct that I need to run "btrfs filesystem defragment /mnt/nvme_cache"? I am not doing any snapshots and no longer have vdisks on my nvme. You are correct in that I moved them all. Do I need to stop my dockers and the docker server before running the defrag though? EDIT: "btrfs filesystem defragment -r /mnt/nvme_cache" made no difference. My docker image is also only 40 GB (which I have not deleted yet) and my libvirt file (which I did delete) is only 1 GB.

Thanks. There still seems to be an issue/discrepancy in the free/used space. The Calculate Usage shows 89 GB used where the Main page shows 263GB. I think I just need to move my appdata and system data off this pool, blow away the pool, and recreate it. Unless there is another way to reclaim this space that I'm not aware of.