• Posts

  • Joined

  • Last visited

Everything posted by ZosoPage1963

  1. Probably a dumb question, but also probably an easy answer. When running this new version using the NVidia plugin, it seems it is using a lot of CPU also. Is that normal or do I have a configuration problem?
  2. went through all dockers and host paths all point to somewhere within /mnt/user/ which to my understanding, would be storage. I did remove one docker container, Unmanic, to see if maybe I had something set up incorrect there. I am using /tmp to transcode in Plex, but I think I saw somewhere that is where we want to transcode from. Will update again in a week or so unless this happens again sooner. Thank you again for the suggestions as I am quite lost on this.
  3. ok, that makes sense since I am seeing that NT disk status full. I will look around in my dockers to see what I did. Just to confirm, looking into the docker settings to see if I mapped one to something that is not storage. correct?
  4. happened again this morning. What am I looking for in the syslog.txt to show multiple browsers open. Not sure how that is occurring. Here is the latest syslog txt. syslog.txt
  5. server is currently experiencing this issue. on the bottom, Array Started /Array undefined is flashing back and forth. On the "Main" Tab, there is this message: Warning: Invalid argument supplied for foreach() in /usr/local/emhttp/plugins/dynamix/include/DefaultPageLayout.php(522) : eval()'d code on line 19 On the user shares tab, there is this message: Warning: syntax error, unexpected end of file, expecting TC_DOLLAR_CURLY or TC_QUOTED_STRING or '"' in state/shares.ini on line 271 in /usr/local/emhttp/plugins/dynamix/include/ShareList.php on line 21 its very weird, because I am using a VM on this server to write this. The VM is on my cache drive. Since there are no drives. Is there any command i can run in terminal that will grab some info?
  6. thanks for the reply. I have had the flash drive in the same usb port for 3 years. I stopped downloading and converting using unmanic at the same time, and the problem has gone away. I just wonder if the combination of my cache drive filling up, coupled with the work that unmanic was doing, just made the array go wonky. Will mark this as solved but in case someone has the same problem in the future, what caused this to happen was never really found.
  7. Lately, after the server has been up for a while, I log in and see that I am getting an "array not defined" error along the bottom. Obviously, the drives are not showing, and dockers are not showing either. I try to download diag info when it happens, but can't. Attaching diags from after a reset. Recently, I have rearranged my media folder and cleaned out TV shows. I mention this because I am downloading quite a bit through sonarr and I am converting to HEVC utilizing Unmanic. I have a GPU that is working pretty hard to convert to HEVC, but nothing is over heating, etc. Help or direction would be appreciated.kashmir-diagnostics-20210904-1309.zip
  8. Got it...making that happen and I am sure you all are right... didn't mean to doubt. Thanks a ton! configured all containers correctly and confirmed no other issues... thanks again.
  9. TV is a subfolder, Done includes Sonarr, Radarr, and Lidarr... Radarr is Done/Movies, Lidarr is /Done/Music.. does that make sense? I use SAB
  10. think that was it.. thank you... I had it as /mnt/user/Downloads/ so I added /Done at the end.
  11. Having an issue for a while, but just have some time to ask for help. Log is showing a ton of these: 1-6-15 09:12:13.9|Error|DownloadedEpisodesImportService|Import failed, path does not exist or is not accessible by Sonarr: /data/Done/tv/ *Ensure the path exists and the user running Sonarr has the correct permissions to access this file/folder. What have I missed?
  12. Somehow, my router, an edgerouter-x 5 port lost its configs without me backing it up. I re-added port forwarding to get Ombi, nextcloud and plex back up, but for some reason, I am not able to reach nextcloud and ombi from my LAN. I can reach the sites when not connected to my home network. What am I missing? I checked the conf files in nextcloud, etc and they are the same as when I installed using spaceinvader one's tutorial 2 years ago. Am I missing a port forwarding? when I try to get to nextcloud.XXXXXXX.org, the broswer goes to my router ip ( but shows nextcloud.XXXXX.org in the address bar.
  13. I actually did search for this error and it was mentioned to rename the default and that it did not work... I am sorry I took up your time. FYI, in case anyone does a search, it does work, just delete the default file and restart.
  14. Thank you for this!!! I am not great at figuring out what i need to do on this. I did get rid of the phone region error just by adding the line to the config.php and the occ db:add was easy, but I am unsure what I need to do for the "/well-known/webfinger" and "/well-known/nodeinfo" warnings that I am getting. can someone help lay it out for me? Do I just add the above to the /nextcloud/nginx/nginx.conf file?
  15. interesting, I will reboot again but just to let you know, I live in Houston and recently, the unraid server has been rebooted multiple times due to the power outages here... UPDATE: I have rebooted multiple times due to power outages in my area and the error is still showing. For now, since my syslinux.cfg is exactly like the default, I am ignoring it, but would like to know where else this could be pulling from. I must be missing it somewhere...
  16. yep... should I do an extended test?
  17. Thanks Squid... after sitting on the error for a bit, I gained courage to delete the lines out of /flash/syslinux/syslinux.cfg and it now looks like this, but I am still getting the error in fix common problems... sorry to be a pain, but this looks like the default config. Thoughts? default menu.c32 menu title Lime Technology, Inc. prompt 0 timeout 50 label Unraid OS menu default kernel /bzimage append initrd=/bzroot label Unraid OS GUI Mode kernel /bzimage append initrd=/bzroot,/bzroot-gui label Unraid OS Safe Mode (no plugins, no GUI) kernel /bzimage append initrd=/bzroot unraidsafemode label Unraid OS GUI Safe Mode (no plugins) kernel /bzimage append initrd=/bzroot,/bzroot-gui unraidsafemode label Memtest86+ kernel /memtest
  18. Hi all, just upgraded to 6.9.0 rc2 two days ago. I am now getting this error, and I have no idea how to fix it. Anyone have the steps that I can take to fix? Legacy PCI Stubbing found: vfio-pci.ids or xen-pciback.hide found within syslinux.cfg. For best results on Unraid 6.9+, it is recommended to remove those methods of isolating devices for use within a VM and instead utilize the options within Tools - System Devices.
  19. thank you. I have set it to 1866. For the Power supply idle control, I have it set at Auto. Should it be set to something different?
  20. yep, been there done that... I have 1st Gen Ryzen, 4 slots DDR4. In my bios, I have the DRAM Frequency set to DDR4-2133, which follows the chart on that post.
  21. I have started having some random lockups over the past month where my unraid server will just lock up. I am not knowledgeable enough to know how to lock down what I did to mess up the stable system I had in the past, or if I have some random piece of hardware starting to fail. I ran diags after this latest crash and have attached them here for some help. Obviously, the server has become entrenched in my families lives, with nextcloud, plex, etc. and when this happens, we lose all of that until I can reset. Compared to y'all, I am not anyway technical, but can follow instructions. Thanks in advance for any help that can be given. tower-diagnostics-20201126-0829.zip
  22. so, since I believe I have 1st gen Ryzen, I should go into my bios and downgrade the DDR4-3200 RAM that I have to the max that is allowed. Or, if I am leaving it at 3200, I am basically overclocking the RAM. Correct? Or, even better... dump Ryzen and go with Intel and swap motherboard and cpu out...
  23. Awesome, thank you for the help. I thought that the speed of the RAM was reflected in the number after DDR4... in my case, it is 3200. RAM has always been difficult for me, and I thought I had it worked out, but obviously, I haven't and need to read a bit more. Thanks for the schooling.