Steviewunda
-
Posts
127 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by Steviewunda
-
-
13 minutes ago, Steviewunda said:
I'm getting this warning even after making the recommended change in Docker Settings
Sorry - just did a reboot and no longer getting this warning
-
I'm getting this warning even after making the recommended change in Docker Settings
-
Solved - I used the USB Creator tool to recreate the USB stick - no change. Then I followed these instructions which resolved this issue - boot time is now about 2 minutes
-
I just ran scandisk on the USB drive in my Windows PC, but it found no errors. After error-checking I re-inserted it in the Unraid server, and boot time was about 9 minutes.
-
I'm experiencing exactly the same issue, and booting takes much longer (maybe 5 minutes) than my other Unraid server. I have included the results of the command 'ls -lah /boot', and attached my diagnostics zip. I would be grateful if someone could check these, and let me know if I should also follow trurl's recommendations. Note that unlike the original poster, I have no '.rec' files. Cheers, Steve
root@Tower2:~# ls -lah /boot
total 321M
drwx------ 9 root root 16K Jan 1 1970 ./
drwxr-xr-x 20 root root 440 Apr 9 15:47 ../
drwx------ 8 root root 16K Mar 8 04:43 .git/
-rw------- 1 root root 180 Dec 12 00:14 .gitattributes
drwx------ 3 root root 16K Dec 10 01:59 EFI/
drwx------ 2 root root 16K Dec 10 07:39 System\ Volume\ Information/
-rw------- 1 root root 118M Dec 10 11:20 bzfirmware
-rw------- 1 root root 65 Dec 10 11:20 bzfirmware.sha256
-rw------- 1 root root 6.0M Dec 10 11:20 bzimage
-rw------- 1 root root 65 Dec 10 11:20 bzimage.sha256
-rw------- 1 root root 20M Dec 10 11:20 bzmodules
-rw------- 1 root root 65 Dec 10 11:20 bzmodules.sha256
-rw------- 1 root root 158M Dec 10 11:20 bzroot
-rw------- 1 root root 20M Dec 10 11:20 bzroot-gui
-rw------- 1 root root 65 Dec 10 11:20 bzroot-gui.sha256
-rw------- 1 root root 65 Dec 10 11:20 bzroot.sha256
-rw------- 1 root root 23K Dec 10 11:20 changes.txt
drwx------ 11 root root 16K Apr 9 15:47 config/
-rw------- 1 root root 120K Dec 10 11:20 ldlinux.c32
-rw------- 1 root root 68K Dec 10 11:20 ldlinux.sys
-rw------- 1 root root 7.8K Dec 10 11:20 license.txt
drwx------ 2 root root 16K Jan 22 14:31 logs/
-rw------- 1 root root 1.8K Dec 10 11:20 make_bootable.bat
-rw------- 1 root root 3.3K Dec 10 11:20 make_bootable_linux
-rw------- 1 root root 2.4K Dec 10 11:20 make_bootable_mac
-rw------- 1 root root 147K Dec 10 11:20 memtest
drwx------ 2 root root 16K Jan 21 22:41 preclear_reports/
drwx------ 2 root root 16K Dec 10 01:59 syslinux/
root@Tower2:~# -
-
Hi - I want to use hardlinks to minimize disk activity when using Radarr, Sonarr, etc. I plan to follow the Trash guide for Unraid ( https://trash-guides.info/Hardlinks/How-to-setup-for/Unraid/ ) I noticed that when I created a sub-folder under the top-level share (data), the owner was 'root' and the default permissions were 'drwxr-xr-x'. However my existing "Movies, TVShows, etc' shares are owned by 'nobody' and permissions are 'drwxrwxrwx'. Who and what should the owner and permissions be? In fact, ALL my other shares are owned by 'nobody', and permissions are 'drwxrwxrwx' (I am not concerned about security)
My second question concerns moving my existing movie, tv and music files from their current shares to the new sub-folders. Can I simply use rsync or Krusader to move them? I have setup Krusader per Spaceinvaderone's video to allow instant copy/move from share to share, but does this apply to copy/move from share to subfolder under a share?
-
14 hours ago, dlandon said:
Config folder to start. The rest of it if it still has problems. Most likely config corruption.
Memtest ran for 20 hours with no errors, so I replaced the config folder with an earlier one, and all appears good - even Prowlarr configuration which was done after the backup used, and which I expected to lose. SMB networking is working as it should - many thanks to all!
-
1
-
-
Thanks - i'll try that when memtest has had a good run
-
1 minute ago, dlandon said:
I would restore the flash from a backup.
The whole flash drive, or just the config folder?
-
16 hours ago, JorgeB said:
Samba is a little outside my wheelhouse, maybe @dlandoncan help.
Hi @dlandon - Frank1940 and JorgeB suggested that you might be able to help with my problem. Frank's last suggestion (via PM) was to run memtest which is 3 hours in with no errors so far. If you scroll up you will see my diagnostics attachment, and the section that Frank thinks may pinpoint the problem.
I have a Flash drive backup from before the problem started, if that's any help?
Hoping you can help, Steve.
-
Hi Frank1940 - I can open all 3 files in Notepad++. Should I PM them to you? Or supply screenshots?
-
Thanks guys..I'll hold off on the screenshots until this is sorted
-
I have followed the Unraid & Windows 10 SMB Setup.pdf you recommended, but I still cannot access this Unraid server via SMB. I have followed the guide to a tee, but still get the failures shown in the accompanying attachments. I can access it by web browser, but I need SMB access for my Windows 11 media player. No problem accessing the other Windows (10 and 11) and Unraid computers by web browser or Windows File Explorer. I have also included another diagnostics file.
-
I t has occurred to me that I could restore the flash drive to a config that existed before I had to reboot and lost SMB connectivity. My other Unraid server has no SMB connectivity problems, so I assume that flash drive corruption could be ruled out by by restoring an earlier saved flash config. Does this sound reasonable?
-
Can anyone help with this please? I have followed Frank1940's SMB guide (
) but I still don't have access to all my media needing SMB access in order to play. Any help appreciated.
-
Hi - I had a problem with my main Unraid server (TOWER) yesterday - the readout on the 'Main' webpage was constantly changing - no array, no Flash drive, no cache pool, all disks unassigned, etc. I tried to download diagnostics, but got a '404 - not found'. So the diagnostics attached are from after a reboot. After rebooting the array, cache pool, and Flash drive came back, and I can access TOWER from the web gui, but not from Windows File Explorer (see attachments). Disk read/write counters were reset. My backup Unraid server (Tower2) has no such problems, so I presume it is a configuration problem with TOWER. I haven't followed Frank1940's SMB troubleshooting guide yet - I thought I would post my diagnostics and see if someone could see something obvious
Cheers, Steve
-
Hi - does it make any difference whether disk shares are enabled or not? I have had them enabled, but I have read that I am less likely to screw up when moving data around if I disable disk shares, and work only with user shares. Does Dupeguru care whether disk shares are disabled or not?
-
Solved - I deleted and re-created the 'Movies' share on Tower2. I also changed the Split level to 'Automatically split any directory as required'. I don't know if this was necessary, but the 'Movies' share is now on Disk 4, as I wanted.
-
I have setup Tower2 as a backup for my main Tower server, using rsync to backup user shares from Tower to Tower2. The 'Music' share on Tower2 honours the Disk settings in the Share properties (included Disks=1), but the 'Movies' share does not (included Disks=4). Instead of Disk 4, the 'Movies' share is on Disk 2. Do I need to exclude Disks 1, 2, and 3 as well as including Disk 4 for the 'Movies' share? I thought that including Disk 4 had the same effect as excluding the other disks.
I have attached screenshots of share settings, and diagnostics
Cheers,
Steve
-
-
I recently lost data using Unbalance, even after a successful dry run, so I'm a little wary. Can I simply use Krusader or File Manager to copy/move files that remain on the 'old' disk after allocating a different disk to that share?
-
Thanks - how should I move existing data to the share on the newly allocated disk?
-
If I change disk allocation in a share's properties, will Unraid automatically move existing data to the newly allocated disk?
[Plugin] CA User Scripts
in Plugin Support
Posted
Where do I find "/tmp/user.scripts/tmpScripts/Backup" in order to view my rsync logs? Sorry to ask such a basic question, but I have searched the unRaid forums without an answer