stourwalk

Members
  • Content Count

    78
  • Joined

  • Last visited

Community Reputation

0 Neutral

About stourwalk

  • Rank
    Newbie

Converted

  • Gender
    Male

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Hi, Does anyone have any experience of installing a IPsec VPN client on unraid - I have a need to be able to connect to this sort of VPN for a work commitment and being able to do it from unraid would make it much easier to tunnel traffic over ssh... From googling it would appear that strongswan/openswan/libreswan (maybe I should just *swan) might be in order, but I'm not sure so wondered if anyone else had already done this that could guide me in the right direction! Any help would be appreciated.. Thanks Chris
  2. Hey Squid Using 6.3 - Community Application Auto-Update wants to update, but when it tries it fails. It's trying to grab version "2017.06/09" I suspect you meant 2017.06.09 (which if you amend the wget command accordingly it does find.. Any chance you could update the plugin so I can grab it correctly? (and no it wont' auto-update now )
  3. Well I thought that would save me the trouble of visiting my local San Antonio stores to find one then but obviously I'm in a different part of San Antonio to you Found some at North Rim and at La Cantera (well two fewer there as I've just bought 'em!)
  4. Tried that - still no file being created.
  5. Community Applications Auto Update, Plugin Section. Make a change to the schedule, any change and apply it. Problem will disappear I'm also suffering from this annoying email - and no matter what setting I change in the Auto Update section the updateApplications.sh file is *NOT* being created so I continue to receive the emails.. I've changed settings in each of the 4 sections (the Plugin Schedule part, the list of plugins, the Docker Schedule and the list of Dockers) - applying in between each one.. I have an updatePLG.sh but not updateApplications.sh in/usr/local/emhttp/plugin
  6. Apparently the 4x35 hotswap cage that would match the ones in the bottom does NOT fit in the top drive cage, whilst the cages are the same width I believe the mounting points don't line up There is a specific 8x2 hotswap cage that DOES fit (it has a different part number to the one that goes in the bottom). We *assume* that standard 4in3, 5in3 style cages would fit - but until someone tries it we won't know..
  7. Which heatsinks are you using with that case? If you are using the P4000 chassis with the S2600CP motherboard you should be using http://www.ebay.com/itm/201082357765 alongwith the correct air shroud http://www.ebay.com/itm/381083917540 The baby passive heatsinks that come with the board from Natex are designed for 2U systems and not the P4000 chassis
  8. In that case send me the link if you don't mind. PLEASE! Sent from my SAMSUNG-SM-N920A using Tapatalk http://www.ebay.com/itm/380990951500 I paid $40 for mine from here...
  9. What firmware do you have flashed to the RS2WC080? If you left the MPT2BIOS enabled; do you see the drive ID LED (amber) light up when in the card's BIOS -> {adapter} -> SAS Topology -> Direct Attach Devices -> [select any of the drives & hit ENTER]; the Drive ID LED will start flashing on that slot. If you do, then this proves that the SGPIO is working. I have two of these P4000M chassis; each with (1) 8x3.5" & (1) 8x2.5" HSBP drive cages where each HSBP is connected to a RS2WC080 (two cards in each system) that's been cross-flashed with LSI 9211-8i IT FW, and the
  10. Hi, Is it possible for the Active Streams plugin to show which disk the file that is being accessed is on rather than just the share? It would be very useful to know which disk was being accessed (so I can see if it is worth moving commonly accessed files onto different disks to prevent thrashing for example) Additionally could we have it it available on the Dashboard page in place of the list of Shares? The list of shares doesn't really change but the list of active files on the Dashboard would be incredibly useful.. Thanks
  11. Glad you are seeing the same ipmi output as me - I'll quit worrying about that one As for the drive lights - yes i probably did mean the i2c cable - the 3 wire one that connects from the lower right (looking from the back) corner of the backplane to the motherboard (over by the PCIe slot..). It's been connected since day 1 - 7 3.5" drives attached (4 different models) and not a single one shows a light.. I tried updating the FRU/BMC etc again today and no change. Does anyone else with this combo get the HDD led activity indicators (or not as the case maybe..)? NB: The HD i
  12. @jwegman ... Couple of questions to satisfy my curiousity.. With a S2600CP2J and a Intel P4308 case and a Intel RS2WC080.. 1. Should I see the HDD lights on the 3.5" hot-swap cages light up when they are being accessed (mine don't..). The 8x3.5" backplane is connected to the RS2WC080 (flashed to run in IT mode, no BIOS support). The SGPIO cable is connected to the motherboard. I'm using the proper intel AXXCBL650MSMS (ie mini-SAS to mini-SAS) cables between the RS2 and the HSBP.. 2. Using the nice IPMI plugin - if I run ipmi-fru I get FRU Inventory Device: Baseboa
  13. Is there any possibility of System Temperature being able to display temperatures for dual CPU setups? Or does it have to be setup manually (and have I just missed the instructions somehow :-) ) It would be nice if the System Stats also showed both CPU's - the details stats do, but the top section (which is the same as the original 'Info' popup doesn't)
  14. Hey Jonnie, Old 5 was very dead - not recognised by BIOS most of the time or unRaid when the BIOS did find it.. SMART report for it on the one occasion at the end when I could run it was very very unhappy.. If the du is anything to go by the real disk is 'happier' - the emulated disk really wasn't playing ball with du Can I assign the new disk5 back into the array (so it's no longer emulated) and run reiserfsk on it? Any hints on the correct way of doing reiserfsk - I've not had to do it before.. If it repairs the filesystem enough I'll take my chances with the files that
  15. Hmm, Doesn't look like is going to be quite as simple as I'd like. Removed Disk 5 from the array as you suggested and started the array - drive 5 shows up a 'X', but it is being emulated. Did the same du -hs * on /mnt/disk5 - and I get *more* (and different!) permission errors than I had before. So I'm thinking that rebuilding the drive now is going to make matters worse.. The original disk 5 was sent off today for a warranty repair - so at some point in a couple of weeks or so I'm going to have a spare 4Tb drive. I'm *wondering* whether my best course of action wo