BennyD

@Squid Sorry to keep tagging and bothering you... I am seeming to be having more random reboots now, and it is screwing up Dockers here and there, I've had to rebuild/re-setup and completely re-import and re-build my Plex meta-data and such... I'm not really sure what is going on... I have new hardware arriving Tuesday... Hoping that my current hardware is the problem... Attached is my Syslog from right after the last random reboot.... Thank you so much for your time and helping this community out! I'll be buying you a few beers soon! tower-syslog-20200426-0334.zip

@Squid Here it is... Hopefully you're able to help me out again. I greatly appreciate your time and help. tower-syslog-20200421-1857.zip

If I were to post the proper log, would you be able to help pinpoint? I'm trying not to go spend $800 if I don't NEED to. LOL

It just doesn't make sense to me... I've tried 2 different coolers, there is PLENTY of airflow in the case. Hell, none of the air exhaust or anywhere on the mobo or around the CPU is ever even warm, that's why I am asking. It's really confusing me, Aircooled and Liquid cooled temps are the exact same.

@Squid Did you happen to notice anything in my diagnostics that would be causing "Your CPU is overheating and has been throttled down (This may however be a transient occurance). You may need to clean your filters and/or increase your cooling capacity." from Fix Common Problems? I am getting this notification at least once per day.

No over clocking here. Though thinking about the XMP profile. There may actually be one set, however if there is, it's been set that way since day one of starting to use unRAID over a year ago. And it's extremely strange, these "random reboots" because the system isn't actually rebooting, it takes way longer to boot back up than it takes for me to be able to re-gain access to the webui. If that makes sense to you. So, I usually can't access the webui for a couple of minutes after powering on the server, but with whats going on lately, the webui just becomes unresponsive, and in just a minute it works again, convincing me that it's not doing a full reboot, and by unresponsive, I mean the server can't be accessed at all for a couple of minutes. Like I said though, getting it to boot up normally takes longer than what is happening now. I'm so confused and paranoid... LOL I would kind of like to just get some new hardware, but I don't know what I should really buy.

Thank you for the response, I have some questions for you though. Are you positive about this? Here's what went down. I was wanting to know how to monitor temps in unRAID. Found Dynamic Temps. Get that going, not knowing 100% if I had the correct probes set for CPU and Mobo temps. Started getting CPU overheating and throttling warnings... I was in panic mode after seeing this for 3 weeks. So I went and changed out the 7 year old AIO thinking that maybe the pump died(however no noticeable warmth inside the case AT ALL, which I think the case would at least be blowing warm air if the CPU was reaching 80c) with no changes, temps stayed the exact same, still getting the same warnings 2 times per day. Chatting around in an unRAID discord channel, someone mentioned using IPMI, wasn't aware that my MOBO and hardware had to support IPMI, but was trying to see if my hardware did support it. Not thinking that it does. But ever since then, I've been getting the MCE warnings. Another thing, you say "MCE when initializing the CPU at boot up time." However my machine hasn't booted up since doing any of this, it's been running for weeks without rebooting. I didn't notice though, that my server stops responding quite frequently the last couple of days, and it seems to be like "soft resetting" somehow? Meaning the Uptime counter, has reset itself a couple of times without me actually rebooting the system or turning it off. My Plex users and myself are also noticing severe interruption the last couple of days. Someone, please? I'm a noob with unRAID but I'm TRYING. I'm just having some issues way out of my league right now. If I need to replace hardware I have no problem doing that, but I also don't have money to just keep wasting on trying different things.

Wasn't really sure where to post this... but I am in need of some help. I'm an unRAID noob. However I seem to be having a hardware error and unraid told me to install mcelog. I did this and re-ran the Fix Common Problems. Here is my log.. Can I get some help please? tower-diagnostics-20200418-2341.zip

@strike Yeah, I only use binhex containers. Would you mind if I PM'd you?

Yeah, you guys are correct. the description wasn't changed and it was totally screwing with me!

Aha! Thanks! I was being confused because under the field I have the /mnt/user/Downloads defined it says "/data". Thank you everyone for all of your help! GREATLY APPRECIATED! Sorry to be such a rookie! I'm trying, I really am! Googling and some of the docker settings confuse me, the fields are very descriptive. Hehehe @strike Yeah, I understand how the mapping works, I was just confused because it seems like every docker image, the directory your mapping to is just "labeled" as /data instead of in deluge that /data should really say /downloads, that's why I was so lost.

Yeah, I noticed what was wrong with your post after setting it, I fixed it right after. I'm still confused as to where this /downloads directory is being set.

Well... I switched it to /downloads from your first response, and it's downloading stuff now without any errors so far, where is this directory defined? I have been trying to fix this on my own for a week now and it's driving me insane. I'm so confused, and I think I have gotten more confused googling! LOL I have switched it to be /downloads/incomplete /downloads/complete. Seems to be working fine now...

I have not changed this since making the post. I can't find where the "/downloads" is actually being called to be mounted. Also, I have tried using /data/incomplete, /data/complete, with the same Permission denied issue.

Can't find anything in the Apps tab for anything to do with docker permissions, I have New Permissions in the Tools tab, I ran new permissions on the Downloads folder, but not sure if this is completing what you're suggesting, it had no effect. Just noticed you had made an edit. Trying something now. Not sure how to make sure I have a docker safe version of new permissions but it's running, so let's hope! LOL.

Correct.

Ahh! Right. Sorry, I'm a total noob to all of this stuff. So I did delete the correct perms.txt and restarted the docker with the same result. I'm still stuck with deluge telling me "Status: Permission denied: /data/incomplete/" This location should be correct, I have the /data in the settings of the docket mapped to /mnt/user/Downloads/ and inside of there is my incomplete, complete, and unzipped_torrents directories. So, using /data/incomplete should be the correct pathing?

I'm not finding a /config/perms.txt. I can see a perms.txt inside of the delugevpn container, but deleting that and restarting didn't fix the issue. I'm not finding a config directory anywhere.

Thank you. I will try this when I get home this afternoon.

OUCH! I didn't even notice!! Thank you!

Thank you... I'm not real sure why I didn't notice that at first. Here is the Run and the Log. Sorry, I'm unsure on how to make this smaller!

Hello all, pretty new here and new to all of this Docker stuff. Have an issue at the moment. I changed some drives around, and then ended up having to recreate my docker containers. Now, the deluge docker is saying that Permission is denied on the directories it's supposed to be using, but it's using the same directory links and such that it was using before I had to re-do my dockers. It's not making sense to me, and I'm unsure how to go about fixing it or getting help, so I wanted to post here and see if anyone would be able to help. I have used spaceinvaderone's videos, googled, can't find a working fix. Please let me know what I need to do to be able to get some help!