-
Posts
7 -
Joined
-
Last visited
Zeus-1830's Achievements
Noob (1/14)
0
Reputation
-
Im getting the same now
-
Hi All, Is there a way to check what time and why my server randomly shutdown last night during a data rebuild? There was no power outage of my knowledge, my server is connected to a UPS with shutdown set to power off the server at 10 min battery left. I'm wondering if it is the PSU which is a (EVGA 550W) as its only happened since i added a 12TB drive and did a parity/ data swap. My setup is as below; Ryzen 5 2600X 3 x 120mm fans 2 x 80mm fans 9 x 3.5 HDD 2 x NVME 2 x SSD 1 x GPU 1 x LSI Card
-
Ok, so new parity disk. Then do a new config without the SSD. Thanks pal much appreciated
-
I added it when i first set my server up not knowing SSD were not supposed to be in the array, and have not got round to replacing it or can i just remove it from the array.
-
Hi please see attached olympus-diagnostics-20190916-1301.zip
-
Im in the same situation how do you do a correcting check
-
Hi all, My server did its normal parity check the other day and is now saying it has errors. Can anyone tell me if the disk is ok or should i get it replaced. smartctl 7.0 2018-12-30 r4883 [x86_64-linux-4.19.55-Unraid] (local build) Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD60EFRX-68MYMN1 Serial Number: WD-WX31D254PTD2 LU WWN Device Id: 5 0014ee 261498f93 Firmware Version: 82.00A82 User Capacity: 6,001,175,126,016 bytes [6.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5700 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Sep 16 13:44:17 2019 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 5024) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 703) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 001 051 Past 0 3 Spin_Up_Time POS--K 205 185 021 - 8708 4 Start_Stop_Count -O--CK 069 069 000 - 31223 5 Reallocated_Sector_Ct PO--CK 183 183 140 - 511 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 063 063 000 - 27647 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 101 192 Power-Off_Retract_Count -O--CK 200 200 000 - 64 193 Load_Cycle_Count -O--CK 189 189 000 - 34223 194 Temperature_Celsius -O---K 120 096 000 - 32 196 Reallocated_Event_Count -O--CK 140 140 000 - 60 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 1 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 40 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 9554 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 9554 [1] occurred at disk power-on lifetime: 27629 hours (1151 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 05 40 00 01 c8 a4 5d d8 e0 00 Error: UNC 1344 sectors at LBA = 0x1c8a45dd8 = 7661182424 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 05 40 00 01 c8 a4 5a 70 e0 08 2d+02:33:44.890 READ DMA EXT 35 00 00 05 40 00 01 c8 a4 4f f0 e0 08 2d+02:33:44.887 WRITE DMA EXT 25 00 00 05 40 00 01 c8 a4 55 30 e0 08 2d+02:33:44.862 READ DMA EXT ef 00 10 00 02 00 00 00 00 00 00 a0 08 2d+02:33:44.861 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 2d+02:33:44.861 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 9553 [0] occurred at disk power-on lifetime: 27629 hours (1151 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 05 40 00 01 c8 a4 53 28 e0 00 Error: UNC 1344 sectors at LBA = 0x1c8a45328 = 7661179688 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 05 40 00 01 c8 a4 4f f0 e0 08 2d+02:33:40.773 READ DMA EXT 25 00 00 01 80 00 01 c8 a4 4e 70 e0 08 2d+02:33:40.754 READ DMA EXT 25 00 00 05 40 00 01 c8 a4 49 30 e0 08 2d+02:33:40.741 READ DMA EXT 35 00 00 05 40 00 01 c8 a4 3d 30 e0 08 2d+02:33:40.739 WRITE DMA EXT 25 00 00 01 80 00 01 c8 a4 47 b0 e0 08 2d+02:33:39.833 READ DMA EXT Error 9552 [23] occurred at disk power-on lifetime: 27629 hours (1151 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 05 40 00 01 c8 a4 3d d0 e0 00 Error: UNC 1344 sectors at LBA = 0x1c8a43dd0 = 7661174224 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 05 40 00 01 c8 a4 3d 30 e0 08 2d+02:33:35.839 READ DMA EXT 25 00 00 01 80 00 01 c8 a4 3b b0 e0 08 2d+02:33:35.838 READ DMA EXT 25 00 00 05 40 00 01 c8 a4 36 70 e0 08 2d+02:33:35.836 READ DMA EXT 35 00 00 05 40 00 01 c8 a4 2f b0 e0 08 2d+02:33:35.834 WRITE DMA EXT 35 00 00 00 40 00 00 e9 63 bc 60 e0 08 2d+02:33:35.834 WRITE DMA EXT Error 9551 [22] occurred at disk power-on lifetime: 27629 hours (1151 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 05 40 00 01 c8 a4 33 20 e0 00 Error: UNC 1344 sectors at LBA = 0x1c8a43320 = 7661171488 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 05 40 00 01 c8 a4 2f b0 e0 08 2d+02:33:31.653 READ DMA EXT 35 00 00 05 40 00 01 c8 a4 25 30 e0 08 2d+02:33:31.651 WRITE DMA EXT 25 00 00 00 40 00 00 e9 63 bc 60 e0 08 2d+02:33:31.651 READ DMA EXT 25 00 00 05 40 00 00 e9 63 b7 20 e0 08 2d+02:33:31.647 READ DMA EXT 25 00 00 05 40 00 00 e9 63 b1 e0 e0 08 2d+02:33:31.643 READ DMA EXT Error 9550 [21] occurred at disk power-on lifetime: 27629 hours (1151 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 05 40 00 01 c8 a4 28 70 e0 00 Error: UNC 1344 sectors at LBA = 0x1c8a42870 = 7661168752 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 05 40 00 01 c8 a4 25 30 e0 08 2d+02:33:27.400 READ DMA EXT 25 00 00 00 20 00 00 e8 e4 48 88 e0 08 2d+02:33:27.385 READ DMA EXT 35 00 00 01 80 00 01 c8 a4 1d 80 e0 08 2d+02:33:27.384 WRITE DMA EXT 25 00 00 00 f0 00 01 c8 a4 24 40 e0 08 2d+02:33:27.383 READ DMA EXT 25 00 00 05 40 00 01 c8 a4 1f 00 e0 08 2d+02:33:27.360 READ DMA EXT Error 9549 [20] occurred at disk power-on lifetime: 27629 hours (1151 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 80 00 01 c8 a4 1d c8 e0 00 Error: UNC 384 sectors at LBA = 0x1c8a41dc8 = 7661166024 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 80 00 01 c8 a4 1d 80 e0 08 2d+02:33:23.276 READ DMA EXT 25 00 00 05 40 00 01 c8 a4 18 40 e0 08 2d+02:33:23.273 READ DMA EXT 35 00 00 05 40 00 01 c8 a4 10 30 e0 08 2d+02:33:23.271 WRITE DMA EXT 25 00 00 02 d0 00 01 c8 a4 15 70 e0 08 2d+02:33:23.101 READ DMA EXT ef 00 10 00 02 00 00 00 00 00 00 a0 08 2d+02:33:23.101 SET FEATURES [Enable SATA feature] Error 9548 [19] occurred at disk power-on lifetime: 27629 hours (1151 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 05 40 00 01 c8 a4 13 18 e0 00 Error: UNC 1344 sectors at LBA = 0x1c8a41318 = 7661163288 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 05 40 00 01 c8 a4 10 30 e0 08 2d+02:33:19.210 READ DMA EXT 25 00 00 01 80 00 01 c8 a4 0e b0 e0 08 2d+02:33:19.204 READ DMA EXT 25 00 00 05 40 00 01 c8 a4 09 70 e0 08 2d+02:33:19.200 READ DMA EXT 35 00 00 05 40 00 01 c8 a3 fd 70 e0 08 2d+02:33:19.199 WRITE DMA EXT 25 00 00 01 80 00 01 c8 a4 07 f0 e0 08 2d+02:33:15.513 READ DMA EXT Error 9547 [18] occurred at disk power-on lifetime: 27629 hours (1151 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 05 40 00 01 c8 a3 fd b8 e0 00 Error: UNC 1344 sectors at LBA = 0x1c8a3fdb8 = 7661157816 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 05 40 00 01 c8 a3 fd 70 e0 08 2d+02:33:11.706 READ DMA EXT 35 00 00 05 40 00 00 e9 63 a6 e0 e0 08 2d+02:33:11.701 WRITE DMA EXT 35 00 00 05 40 00 00 e9 63 a1 a0 e0 08 2d+02:33:11.697 WRITE DMA EXT 35 00 00 05 40 00 00 e9 63 9c 60 e0 08 2d+02:33:11.523 WRITE DMA EXT 35 00 00 03 c0 00 00 e9 63 62 80 e0 08 2d+02:33:11.522 WRITE DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 27642 - # 2 Extended offline Completed: read failure 30% 27529 7661155080 # 3 Short offline Completed without error 00% 27522 - # 4 Short offline Completed without error 00% 27198 - # 5 Conveyance offline Completed: unknown failure 90% 24926 - # 6 Conveyance offline Completed: unknown failure 90% 24926 - # 7 Conveyance offline Completed: read failure 90% 24785 4193056 # 8 Extended offline Completed: read failure 90% 24781 4193040 # 9 Short offline Completed: read failure 20% 24781 4193040 #10 Short offline Completed without error 00% 9 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 28/35 Celsius Lifetime Min/Max Temperature: 2/56 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (116) Index Estimated Time Temperature Celsius 117 2019-09-16 05:47 28 ********* ... ..( 18 skipped). .. ********* 136 2019-09-16 06:06 28 ********* 137 2019-09-16 06:07 29 ********** ... ..( 16 skipped). .. ********** 154 2019-09-16 06:24 29 ********** 155 2019-09-16 06:25 28 ********* ... ..( 16 skipped). .. ********* 172 2019-09-16 06:42 28 ********* 173 2019-09-16 06:43 29 ********** ... ..( 16 skipped). .. ********** 190 2019-09-16 07:00 29 ********** 191 2019-09-16 07:01 30 *********** ... ..( 19 skipped). .. *********** 211 2019-09-16 07:21 30 *********** 212 2019-09-16 07:22 31 ************ 213 2019-09-16 07:23 30 *********** ... ..( 22 skipped). .. *********** 236 2019-09-16 07:46 30 *********** 237 2019-09-16 07:47 29 ********** ... ..( 21 skipped). .. ********** 259 2019-09-16 08:09 29 ********** 260 2019-09-16 08:10 30 *********** ... ..( 36 skipped). .. *********** 297 2019-09-16 08:47 30 *********** 298 2019-09-16 08:48 29 ********** ... ..( 20 skipped). .. ********** 319 2019-09-16 09:09 29 ********** 320 2019-09-16 09:10 30 *********** ... ..( 38 skipped). .. *********** 359 2019-09-16 09:49 30 *********** 360 2019-09-16 09:50 29 ********** ... ..( 7 skipped). .. ********** 368 2019-09-16 09:58 29 ********** 369 2019-09-16 09:59 30 *********** 370 2019-09-16 10:00 29 ********** ... ..( 2 skipped). .. ********** 373 2019-09-16 10:03 29 ********** 374 2019-09-16 10:04 30 *********** ... ..( 8 skipped). .. *********** 383 2019-09-16 10:13 30 *********** 384 2019-09-16 10:14 31 ************ ... ..( 22 skipped). .. ************ 407 2019-09-16 10:37 31 ************ 408 2019-09-16 10:38 32 ************* ... ..( 51 skipped). .. ************* 460 2019-09-16 11:30 32 ************* 461 2019-09-16 11:31 31 ************ ... ..( 4 skipped). .. ************ 466 2019-09-16 11:36 31 ************ 467 2019-09-16 11:37 30 *********** ... ..( 12 skipped). .. *********** 2 2019-09-16 11:50 30 *********** 3 2019-09-16 11:51 29 ********** ... ..( 25 skipped). .. ********** 29 2019-09-16 12:17 29 ********** 30 2019-09-16 12:18 30 *********** ... ..( 24 skipped). .. *********** 55 2019-09-16 12:43 30 *********** 56 2019-09-16 12:44 29 ********** ... ..( 40 skipped). .. ********** 97 2019-09-16 13:25 29 ********** 98 2019-09-16 13:26 28 ********* ... ..( 17 skipped). .. ********* 116 2019-09-16 13:44 28 ********* SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 246674 Vendor specific WDC_WD60EFRX-68MYMN1_WD-WX31D254PTD2-20190916-1344.txt