dikkiedirk

Is it a modular psu? Then I would contact Seasonic customer service and ask them to send you a couple of sata power cables. You can replace a molex cable with it I think. I got them for my x-760 free of charge.

While there are 5 regular disks and one ARC 1200 RAID Volume on my server, only 4 disks, disk 2,3,4 and cache get benched. I attach diagnostics. [0:0:0:0] disk Generic- USB3.0 CRW -0 1.00 /dev/sda 3.90GB [0:0:0:1] disk Generic- USB3.0 CRW -1 1.00 /dev/sdb - [1:0:0:0] disk Areca ARC-1200-VOL R001 /dev/sdc 3.00TB [2:0:0:0] disk ATA ST2000DM001-1CH1 CC43 /dev/sdd 2.00TB [2:0:1:0] disk ATA Hitachi HDS72202 A20N /dev/sde 2.00TB [3:0:0:0] disk ATA ST2000DM001-1CH1 CC43 /dev/sdf 2.00TB [4:0:0:0] disk ATA ST9500325AS SDM1 /dev/sdg 500GB [5:0:0:0] disk ATA Hitachi HUA72202 A3FD /dev/sdh 2.00TB preclear-diagnostics-20180425-1355.zip

Sorry Squid. I jumped to conclusions too soon, I'm afraid. Will figure it out later.

So it is not possible to edit the /config path anymore? Why is that? And why is it still possible on the older install? So. the docker has indeed been changed? Besides I don't have a /complete mapping, I only see a /data mapping. And where are all those keys for?

Is the /config path now somehow hardcoded in this docker? On the docker page it doesn't show up and Host Path 1 seems to be missing. This is when newly setting up this docker on unraid 6.5.1-RC5 I want my finished download to end up in /mnt/user/media/DVD, /mnt/user/media/BluRay, /mnt/user/media/mkv etc. etc. How do I set this up? On a older install of this docker on a server that was updated to unraid 6.5.0 Host Path 1 does show up and the /config path is still editable, why is this changed in the current version of the docker? Or is something else going on?

Hi John, removing the the Sabnzb fixed the install issue for me. I am now on 60% memory utilization. One bigger issue I have is that while the Areca ARC-1200 is detected, the ports and disks connected to it are not seen, and the RAID1 volume is not benched because of that. Previous CLI versions would bench these volumes though.

Removed Sabnzb which was still running as a plugin and hugging all memory. Everything is OK now.

Can the docker image of 20 GB be too small? Or is it physical memory on the server? It only got 4 GB. How can I troubleshoot this?

Tried to install this docker with default settings on the docker page but see this error: Error: failed to register layer: ApplyLayer fork/exec /proc/self/exe: cannot allocate memory stdout: stderr: Should I change any setting or what else can be wrong? This server is running unraid 6.5.1-RC5, probably a compatibility issue. I installed this docker on a server running 6.5.0 without any issue.

As far as I am concerned there will be scaled down version of unraid 64bit with docker function only, so no VM or other fancy stuff. I run my servers headless without the need for anything else but file-serving and downloading. In that case, 16 GB RAM will do nicely, thank you!

thanks, I just googled it. shame on me, always asking. and its working. thanks!

how do I schedule this at 11:30 or 00:30? what is the correct cron syntax for this? the online generator doesn't seem to work.

I am trying user scripts to shutdown my server at night. Would these lines work? #!/bin/bash powerdown | at 01:30 Should the powerdown plugin be installed, or is this functionality now included in unraid 6.3.5?

thanks, seems ok now. what was the cause? does it need to generate they key and cert or are they corrupt?

that link doesn't seem correct. it points me to a beging page

the SABNZB docker page showed update ready and I updated, now I cant reach SABNZB anymore. It seems to be running though, I get a green arrow. log shows: 2017-07-05 22:41:30,122 DEBG 'sabnzbd' stderr output: 2017-07-05 22:41:30,122::ERROR::[_cplogging:219] [05/Jul/2017:22:41:30] ENGINE Shutting down due to error in start listener: Traceback (most recent call last): File "/opt/sabnzbd/cherrypy/process/wspbus.py", line 245, in start self.publish('start') File "/opt/sabnzbd/cherrypy/process/wspbus.py", line 225, in publish raise exc ChannelFailures: SSLError(336245134, u'[SSL: CA_MD_TOO_WEAK] ca md too weak (_ssl.c:2699)') 2017-07-05 22:41:30,122 DEBG 'sabnzbd' stderr output: 2017-07-05 22:41:30,122::INFO::[_cplogging:219] [05/Jul/2017:22:41:30] ENGINE Bus STOPPING 2017-07-05 22:41:30,124 DEBG 'sabnzbd' stderr output: 2017-07-05 22:41:30,124::INFO::[_cplogging:219] [05/Jul/2017:22:41:30] ENGINE HTTP Server cherrypy._cpwsgi_server.CPWSGIServer(('0.0.0.0', 8080)) shut down 2017-07-05 22:41:30,124 DEBG 'sabnzbd' stderr output: 2017-07-05 22:41:30,124::INFO::[_cplogging:219] [05/Jul/2017:22:41:30] ENGINE HTTP Server None already shut down 2017-07-05 22:41:30,124 DEBG 'sabnzbd' stderr output: 2017-07-05 22:41:30,124::INFO::[_cplogging:219] [05/Jul/2017:22:41:30] ENGINE Stopped thread '_TimeoutMonitor'. 2017-07-05 22:41:30,124 DEBG 'sabnzbd' stderr output: 2017-07-05 22:41:30,124::INFO::[_cplogging:219] [05/Jul/2017:22:41:30] ENGINE Bus STOPPED 2017-07-05 22:41:30,124 DEBG 'sabnzbd' stderr output: 2017-07-05 22:41:30,124::INFO::[_cplogging:219] [05/Jul/2017:22:41:30] ENGINE Bus EXITING 2017-07-05 22:41:30,125 DEBG 'sabnzbd' stderr output: 2017-07-05 22:41:30,124::INFO::[_cplogging:219] [05/Jul/2017:22:41:30] ENGINE Bus EXITED 2017-07-05 22:41:30,127 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 47811641720128 for <Subprocess at 47811562678896 with name sabnzbd in state STARTING> (stdout)> 2017-07-05 22:41:30,127 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 47811642369376 for <Subprocess at 47811562678896 with name sabnzbd in state STARTING> (stderr)> 2017-07-05 22:41:30,127 INFO exited: sabnzbd (exit status 70; not expected) 2017-07-05 22:41:30,127 DEBG received SIGCLD indicating a child quit 2017-07-05 22:41:31,129 INFO gave up: sabnzbd entered FATAL state, too many start retries too quickly

Glad to see my issue was solved so quick. Hope it doesn't have any negative effects.

With 29b great too!

It was more involved than I thought. It is related to doing a 'df' to get the size of the mounted device. Doing a 'df' will hang if a device is offline. I had to do 'df /dev/sdX', etc. I only partially solved it in 29a. I will be releasing a 29b today. EDIT: 207.01.29b is available. Much better already, the spiining wheel only appeared a few seconds and GUI is responsive immediately.

Updated to the latest 29a version. I'll see what happens later this evening when my NAS goes off line.

Thanks for the fast reply. At the moment I have my shares deleted but I am glad to set them up again and test. Is the new version released yet? I'll be glad to update the plugin.

I experience some trouble with the unassigned devices plugin. I use it to get access to shares on 2 Qnap NASes. But when these shares go off line the plugin slows down unraids GUI. The plugin shows a spinning wheel on the webpage after it finally opens, which already takes fairly long. Switching from Main to settings or docker or whatever tab takes several minutes, making the UI useless until UD gives up on the shares that are setup. Is there a work around for this? Or can UD wait less longer for the shares to appear, say 1 minute?

I am in a discussion with a sabnzb developer and he suggest that the problem with dir scanner crashing lies in the fact that sabnzb isn't started with UTF8 encoding, probably because unraid dictates another encoding. What is unraid using?

Did my configuration cause the unpack failure I asked about? I don't use CP or Sonarr BTW.

Doesn't it allow the mnt/user structure because it is in a docter? What if I want to use categories where mkvs need to go mnt/user/movies/mkv?