settings

Members
  • Posts

    119
  • Joined

  • Last visited

Everything posted by settings

  1. In my haste I couldn't see the difference between cache:yes and prefer. I do now! I got a shiny new 4TB red for my cache and was just eager to get it going! I ran out of bays on my server a few years ago so had to use an external usb for a make shift cache and now im appreciating all the nice perks again. I don't see an overflow to my raid happening but i have it set to prefer. Thanks for the info Trurl, very good to know!
  2. Oh I wasn't sure what that meant when I was checking it out. I will do that do now. Thanks very much for your help trurl.
  3. Hi trurl, thanks alot for taking the time to reply. I just edited my post to say the issue was resolved. It was indeed poor configuration on my part. I followed the recommendatons made in earlier post for my folder structure and it fixed my problem. I read on another forum that an error 10 on nzbget is related to directory structure. I know this is offtopic but I made an appdata share on my cache in the unraid UI for my app configs. Maybe this should have been made directly onto the cache (/mnt/cache/appdata)? Thanks for your feedback.
  4. edit: Resolved. I noticed there was a subdirectory from nzb in my tv downloads folder and the whole download directory structure was a mess (despite being only 3 apps). After reading around the forum and discovering the best practice is to map apps to a common downloads location on the cache, I reinstalled nzbget and now the appdata folder for it only contains the conf. Downloads are being mapped to /mnt/cache/downloads. This resolved the extraction issues I was having! Very easy when it's simple. thanks Hi, I installed a cache drive on Unraid and did a fresh docker install with nzbget and sonarr from linuxserver. I changed the umask to 000 as stated in the first post but I haven't been able to download anything successfully yet on nzbget. Here are some of the error messages I am getting: error Wed Apr 26 2017 14:08:37 Unpack for Fargo.S03E01.The.Law.of.Vacant.Places.720p.FX.WEB-DL.AAC2.0.H.264-monkee-Obfuscated failed. error Wed Apr 26 2017 14:08:04 Could not delete temporary directory /mnt/user/appdata/Nzbget/downloads/tv/Fargo.S03E01.The.Law.of.Vacant.Places.720p.FX.WEB-DL.AAC2.0.H.264-monkee-Obfuscated/_unpack: No such file or directory error Wed Apr 26 2017 14:08:04 Unrar error code: 10 error Wed Apr 26 2017 14:08:04 Could not create directory /mnt/user/appdata/Nzbget/downloads/tv/Fargo.S03E01.The.Law.of.Vacant.Places.720p.FX.WEB-DL.AAC2.0.H.264-monkee-Obfuscated/_unpack: could not create directory /mnt/user: Permission denied I have tried over 15+ different files and each one had similar results. I created a download folder in Nzbget to map to downloads: /downloads -> /mnt/user/appdata/Nzbget/downloads drwxrwxrwx 1 nobody users 108 Apr 25 12:48 downloads/ -rw-r--r-- 1 nobody users 63656 Apr 26 13:36 nzbget.conf root@Tower:/mnt/user/appdata/Nzbget# Any ideas? Thanks
  5. One of the prerequisites is that there be a share created called "appdata" (https://lime-technology.com/docker-guide/). Using the web interface it's only possible to set up a share on the raid or recognised cache and because I am using an unassigned drive I can't make that share (outside the array). Could this be the barrier preventing the docker from starting up?
  6. I'm having the same issue, my little proliant server is overloaded with 6 disks so I always ran docker on an external drive not in the array. You don't know what you got 'til it's gone
  7. Hey, I reinstalled Unraid a few weeks ago and I am getting this error frequently on Sabnzbd. I initially had the Phaze plugin installed and then I moved to the docker version and I received this warning message on both of them. Could it be something not right with my Unraid? It doesn't seem to be affecting anything - no crashes or bad downloads. Here is a sample from the log last night where it happens 3 times, 2015-04-29 03:40:05,636::INFO::[__init__:919] Saving data for totals9.sab in /config/admin/totals9.sab 2015-04-29 03:40:05,640::INFO::[assembler:89] Decoding /config/Downloads/incomplete/Justified.S06E12.720p.WEB-DL.DD5.1.H.264/Justified.S06E12.720p.WEB-DL.DD5.1.H.264.part01.rar yenc 2015-04-29 03:40:06,726::ERROR::[database:111] SQL Command Failed, see log 2015-04-29 03:40:09,012::INFO::[database:113] Traceback: Traceback (most recent call last): File "/usr/share/sabnzbdplus/sabnzbd/database.py", line 104, in execute self.c.execute(command, args) OperationalError: database is locked 2015-04-29 03:40:06,900::INFO::[downloader:602] Thread [email protected]:443: Article [email protected] missing (error=430) 2015-04-29 03:40:09,312::INFO::[downloader:381] [email protected]:563: Initiating connection 2015-04-29 03:40:10,728::ERROR::[database:111] SQL Command Failed, see log 2015-04-29 03:40:10,729::INFO::[database:113] Traceback: Traceback (most recent call last): File "/usr/share/sabnzbdplus/sabnzbd/database.py", line 104, in execute self.c.execute(command, args) OperationalError: database is locked 2015-04-29 03:40:10,731::ERROR::[database:111] SQL Command Failed, see log 2015-04-29 03:40:10,731::INFO::[database:113] Traceback: Traceback (most recent call last): File "/usr/share/sabnzbdplus/sabnzbd/database.py", line 104, in execute self.c.execute(command, args) OperationalError: database is locked Thanks alot
  8. Oh it actually was DNS, I changed to 8.8.8.8 as you said and it started downloading the dependencies. Thanks very much Phaze, first time using your plugins
  9. Everything is going good now - i formatted my flash and just put a few files like my network, 'super.dat', shares and everything is looking good, I have the new webui and unmenu too. I have been using unraid 3 years and installed most updates - my 'programs' went from packages to plugins etc and I had lots of unnecessary stuff that wasn't been used. Anyways, everything is going good - just want to get 3 apps working now and im happy
  10. I get the following error when trying to install sabnzbd and sickbeard : /usr/local/sbin/plugin install https://github.com/PhAzE-Variance/unRAID/raw/master/Plugins/Sabnzbd.plg 2>&1 plugin: installing: https://github.com/PhAzE-Variance/unRAID/raw/master/Plugins/Sabnzbd.plg plugin: downloading https://github.com/PhAzE-Variance/unRAID/raw/master/Plugins/Sabnzbd.plg plugin: creating: /tmp/Sabnzbd-script - from INLINE content plugin: running: /tmp/Sabnzbd-script Cleaning up previous install files... ...Cleanup complete! Downloading any missing plugin files... Latest plugin control files downloading ...Unable to download missing plugin control files. Aborting install plugin: run failed: /bin/bash retval: 1 I read that wrong DNS information was causing this for some people but I think I am alright - I have a fresh install of unraid but already installed the SNAP plugin and unmenu (which downloads as part of the installation) and my pings seem to be fine. I also get the same error when trying to install via putty. Any ideas? Thanks!
  11. Thank you guys, I will try and do a fresh install of unraid on my flash and only add the essential files - like my key etc. Would that be just my config folder minus any packages? I went to stop the raid in unmenu and it crashed again - turned it off during a parity check- hope I didnt damage anything
  12. Hey, I just upgraded my Unraid from the November release to the latest - 14b. I can access unmenu fine but the main webui which is essential to me for rebooting etc can not be accessed. I went to stop the raid in unmenu but that seemed to crash everything so I cut the power, the same problem when i turned it on again. I followed the guide for upgrading by overwriting the files - however I didn't have a "xen" file in my flash previously if that means anything My syslog was too big to attach so I posted it here http://pastebin.com/da4Hnhez Thanks very much, Regards,
  13. Thanks a million for the help mister hexen! That worked perfectly! I did have to shutdown my server ungracefully (just pressed the power button once and it shut down but its doing a parity now) as I had no way to access the UI. Everythings back now, thanks alot
  14. Hello guys, I had to get a new wireless router after a lightning storm fried my last one. The old router wouldn't allow me to dynamically assign IP addresses so i had to go into the network file in Unraid and set it. The thing is the new router (TP Link) uses ranges of 192.168.0.1 whereas my old linksys used 192.168.1.1. There does seem to be an extra entry in the ARP but I cant access any of them in the browser (for tower ui) or putty.. any ideas? Thanks
  15. Thanks for the reply. I had alot of trouble finding one that could be shipped to me. I ended up going with this http://www.amazon.co.uk/FSP-800VA-Off-line-Comprehensive-Protection/dp/B00ATO6WTA/ref=sr_1_1?s=computers&ie=UTF8&qid=1378424457&sr=1-1&keywords=ups+fsp Would of much preferred a smart UPS but this will give me peace of mind. We dont have many powercuts but had a problem with some fuses lately.
  16. Hope this isn't off-topic but can anyone recommend a good UPS for my N36L? I got 5 WD 2TB greens and a 500g scorpio cache. I only intend to have my server running off this. How would you rate this one? http://www.amazon.co.uk/APC-BE700G-UK-Interface-Power-Saving-Back-UPS/dp/B002RXED6A/ref=sr_1_1?ie=UTF8&qid=1374789343&sr=8-1&keywords=APC+BE700G-UK thaks alot
  17. thanks alot dgaschk for the advice. I will try your suggestion and if it doesn't work I will ask in the printer thread you mention - I was thinking of posting there before but I had this thread from a while ago and its the same problem so I went here. Appreciate your help edit: you got it Dgaschk, that made it work. I actually didnt think it would work but it did. Thanks very much!
  18. Hey guys, edit: I had this problem before (last unraid upgrade) and I got it resolved. I didn't document anything I did to solve it outside of this post so I assume i just reinstalled the package and rebooted I upgraded unraid to the latest beta at the weekend and everything is good apart from my printer. I am getting this same message constantly filling my log Jun 25 16:11:27 Tower p9100d[11238]: /dev/usblp0: No such file or directory Jun 25 16:11:27 Tower p9100d[11238]: /dev/usblp0: No such file or directory, will try opening later I noticed gcc was disabled so I re-enabled that and restarted in case it needed a fresh compile on a new version of unraid (?) I have reinstalled about 6/7 times now with different parameters and the printer off then on etc but I can't get it working again. my current parameters are: port : usblp0 bi-directional : NO scripts : YES ls -l /dev/u* Linux 3.9.6p-unRAID. root@Tower:~# ls -l /dev/u* crw-rw-rw- 1 root root 1, 9 Jun 25 15:56 /dev/urandom /dev/usb: total 0 crw-rw---- 1 root lp 180, 0 Jun 25 16:01 lp0 ps -ef | grep p910 root@Tower:~# ps -ef | grep p910 root 11238 1 0 15:57 ? 00:00:00 /usr/sbin/p9100d -f /dev/usblp0 root 27375 26066 0 16:17 pts/0 00:00:00 grep p910 I noticed the Dependencies: bzip2, gcc compiler, make. I am not sure if I have 'make'. Could this be the reason? thanks alot.
  19. We have an old WD live in one of the rooms and I'm pretty sure it worked straight away. Only once or twice so far it didn't see tower and have to reboot. It has been in use from the early 5+ betas on with no trouble. I have a static IP for Unraid too but i don't even think i had to put it into the WD settings as it reliably picks it up each time. If you want me to check some settings on mine I can no problem
  20. Hey Guys, This probably has been asked in this thread before but I stopped reading when it was about 15 pages old as ye had me perfectly set up at that stage! I now have 6 drives in my microserver- i am using the nexus doubletwin in the optical bay with 3.5" attached and a 2.5" cache sitting under it. I have a 1.5tb, 3.5" external toshiba drive where the power cable has become very temperamental from loaning it out and I am thinking to take the disk out and make it my cache drive in place of the 2.5". The thing is i want to put it in one of the bays for cooling as its gonna be on 24/7 and i notice my drive in the optical bay is always 3-4 degress hotter than the rest. What do i have to do in order to achieve this? Is it just as simple as remove one of the lesser used drives from the bay and put it up top (connecting the sata from the old cache) and put the 3.5" new cache in its place? Thanks very much
  21. If you removed the section of the line I highlighted in red above, you should be fine. It should look like this: /boot/cache_dirs -w -d 4 -m 2 -M 9 -i "TV" -i "Movies" -i "Music" Great, thanks very much Joe L. I did that and its brilliant to have that start up for me all the time now. ha, I love the jingle!
  22. Hey guys, I added the cache dir command to my /boot/config/go last week. However after a power cut today I noticed that cache dirs didnt start automatically (although there is a partiy now- all disks were spun down but my cache when the power went). When i checked my go script it was as follows #!/bin/bash # Start the Management Utility /usr/local/sbin/emhttp & /boot/unmenu/uu cd /boot/packages && find . -name '*.auto_install' -type f -print | sort | xargs -n1 sh -c /boot/config/plugins/snap/snap.sh -b /boot/cache_dirs -w -d 4 -m 2 -M 9 -i "TV" -i "Movies" -i "Music"/boot/config/plugins/snap/snap.sh -b the command to start snap has been added 2x and I'm pretty sure I didnt anything but the cache dirs. I removed the duplicate command at the end but could someone reassure me that everything is okay now thanks very much!
  23. I notice that transmission starts on boot for me even though I have it set to 'no' for enable transmission. Is this the same for everyone or maybe do I have an incorrect parameter somewhere else. edit: oops sorry it is the transmission plugin I have installed not the package
  24. Im sure this has been answered before but is it possible to have cache dirs script start on startup, its the only thing i have to do manually at the moment. I love cache dirs! edit: Thanks Joe L
  25. Thanks guys. I reinstalled the driver after a reboot as I had to print some things and the printer worked as normal. The messages seemed to have stopped now. I wont see it again til next weekend but I will mark this solved as I think its sorted now and I am reassured that it was only the printer. Thank you. edit: yeah sorted, thanks all:)